Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / kirkwood-mv88f6281gtw-ge.dts

diff --git a/kernel/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/kernel/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644 (file)
index 0000000..f82827d
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,181 @@
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Marvell 88F6281 GTW GE Board";
+       compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>; /* 512 MB */
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+       };
+
+       mbus {
+               pcie-controller {
+                       status = "okay";
+
+                       pcie@1,0 {
+                               status = "okay";
+                       };
+               };
+        };
+
+       ocp@f1000000 {
+               pin-controller@10000 {
+                       pmx_usb_led: pmx-usb-led {
+                               marvell,pins = "mpp12";
+                               marvell,function = "gpo";
+                       };
+
+                       pmx_leds: pmx-leds {
+                               marvell,pins = "mpp20", "mpp21";
+                               marvell,function = "gpio";
+                       };
+
+                       pmx_keys: pmx-keys {
+                               marvell,pins = "mpp46", "mpp47";
+                               marvell,function = "gpio";
+                       };
+               };
+
+               spi@10600 {
+                       status = "okay";
+
+                       flash@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mxicy,mx25l12805d";
+                               reg = <0>;
+                               spi-max-frequency = <50000000>;
+                               mode = <0>;
+                       };
+               };
+
+               serial@12000 {
+                       status = "okay";
+               };
+
+               ehci@50000 {
+                       status = "okay";
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+               pinctrl-names = "default";
+
+               green-status {
+                       label = "gtw:green:Status";
+                       gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+               };
+
+               red-status {
+                       label = "gtw:red:Status";
+                       gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+               };
+
+               green-usb {
+                       label = "gtw:green:USB";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_keys>;
+               pinctrl-names = "default";
+
+               button@1 {
+                       label = "SWR Button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+               button@2 {
+                       label = "WPS Button";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       dsa@0 {
+               compatible = "marvell,dsa";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               dsa,ethernet = <&eth0port>;
+               dsa,mii-bus = <&mdio>;
+
+               switch@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+
+                       port@0 {
+                               reg = <0>;
+                               label = "lan1";
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "lan2";
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "lan3";
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "lan4";
+                       };
+
+                       port@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       port@5 {
+                               reg = <5>;
+                               label = "cpu";
+                       };
+               };
+       };
+};
+
+&mdio {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+
+       ethernet0-port@0 {
+               speed = <1000>;
+               duplex = <1>;
+       };
+};