Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / kirkwood-dreamplug.dts

diff --git a/kernel/arch/arm/boot/dts/kirkwood-dreamplug.dts b/kernel/arch/arm/boot/dts/kirkwood-dreamplug.dts
new file mode 100644 (file)
index 0000000..6467c79
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,126 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Globalscale Technologies Dreamplug";
+       compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pmx_led_bluetooth: pmx-led-bluetooth {
+                               marvell,pins = "mpp47";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_wifi: pmx-led-wifi {
+                               marvell,pins = "mpp48";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_wifi_ap: pmx-led-wifi-ap {
+                               marvell,pins = "mpp49";
+                               marvell,function = "gpio";
+                       };
+               };
+               serial@12000 {
+                       status = "ok";
+               };
+
+               spi@10600 {
+                       status = "okay";
+
+                       m25p40@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mxicy,mx25l1606e";
+                               reg = <0>;
+                               spi-max-frequency = <50000000>;
+                               mode = <0>;
+
+                               partition@0 {
+                                       reg = <0x0 0x80000>;
+                                       label = "u-boot";
+                               };
+
+                               partition@100000 {
+                                       reg = <0x100000 0x10000>;
+                                       label = "u-boot env";
+                               };
+
+                               partition@180000 {
+                                       reg = <0x180000 0x10000>;
+                                       label = "dtb";
+                               };
+                       };
+               };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <1>;
+               };
+
+               mvsdio@90000 {
+                       pinctrl-0 = <&pmx_sdio>;
+                       pinctrl-names = "default";
+                       status = "okay";
+                       /* No CD or WP GPIOs */
+                       broken-cd;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+                            &pmx_led_wifi_ap >;
+               pinctrl-names = "default";
+
+               bluetooth {
+                       label = "dreamplug:blue:bluetooth";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+               wifi {
+                       label = "dreamplug:green:wifi";
+                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+               };
+               wifi-ap {
+                       label = "dreamplug:green:wifi_ap";
+                       gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+
+       ethphy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};
+
+&eth1 {
+       status = "okay";
+       ethernet1-port@0 {
+               phy-handle = <&ethphy1>;
+       };
+};