Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / kirkwood-6192.dtsi

diff --git a/kernel/arch/arm/boot/dts/kirkwood-6192.dtsi b/kernel/arch/arm/boot/dts/kirkwood-6192.dtsi
new file mode 100644 (file)
index 0000000..9e6e9e2
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -0,0 +1,86 @@
+/ {
+       mbus {
+               pciec: pcie-controller {
+                       compatible = "marvell,kirkwood-pcie";
+                       status = "disabled";
+                       device_type = "pci";
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+
+                       bus-range = <0x00 0xff>;
+
+                       ranges =
+                              <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+                               0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+                               0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+                       pcie0: pcie@1,0 {
+                               device_type = "pci";
+                               assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+                               reg = <0x0800 0 0 0 0>;
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               #interrupt-cells = <1>;
+                               ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                         0x81000000 0 0 0x81000000 0x1 0 1 0>;
+                               interrupt-map-mask = <0 0 0 0>;
+                               interrupt-map = <0 0 0 0 &intc 9>;
+                               marvell,pcie-port = <0>;
+                               marvell,pcie-lane = <0>;
+                               clocks = <&gate_clk 2>;
+                               status = "disabled";
+                       };
+               };
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       compatible = "marvell,88f6192-pinctrl";
+
+                       pmx_sata0: pmx-sata0 {
+                               marvell,pins = "mpp5", "mpp21", "mpp23";
+                               marvell,function = "sata0";
+                       };
+                       pmx_sata1: pmx-sata1 {
+                               marvell,pins = "mpp4", "mpp20", "mpp22";
+                               marvell,function = "sata1";
+                       };
+                       pmx_sdio: pmx-sdio {
+                               marvell,pins = "mpp12", "mpp13", "mpp14",
+                                              "mpp15", "mpp16", "mpp17";
+                               marvell,function = "sdio";
+                       };
+               };
+
+               rtc: rtc@10300 {
+                       compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+                       reg = <0x10300 0x20>;
+                       interrupts = <53>;
+                       clocks = <&gate_clk 7>;
+               };
+
+               sata: sata@80000 {
+                       compatible = "marvell,orion-sata";
+                       reg = <0x80000 0x5000>;
+                       interrupts = <21>;
+                       clocks = <&gate_clk 14>, <&gate_clk 15>;
+                       clock-names = "0", "1";
+                       phys = <&sata_phy0>, <&sata_phy1>;
+                       phy-names = "port0", "port1";
+                       status = "disabled";
+               };
+
+               sdio: mvsdio@90000 {
+                       compatible = "marvell,orion-sdio";
+                       reg = <0x90000 0x200>;
+                       interrupts = <28>;
+                       clocks = <&gate_clk 4>;
+                       bus-width = <4>;
+                       cap-sdio-irq;
+                       cap-sd-highspeed;
+                       cap-mmc-highspeed;
+                       status = "disabled";
+               };
+       };
+};