--- /dev/null
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &cspi;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ clocks = <&clks IMX5_CLK_ARM>;
+ clock-latency = <61036>;
+ voltage-tolerance = <5>;
+ operating-points = <
+ /* kHz */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ 1200000 1300000
+ >;
+ };
+ };
+
+ display-subsystem {
+ compatible = "fsl,imx-display-subsystem";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ sata: sata@10000000 {
+ compatible = "fsl,imx53-ahci";
+ reg = <0x10000000 0x1000>;
+ interrupts = <28>;
+ clocks = <&clks IMX5_CLK_SATA_GATE>,
+ <&clks IMX5_CLK_SATA_REF>,
+ <&clks IMX5_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
+ ipu: ipu@18000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ipu";
+ reg = <0x18000000 0x08000000>;
+ interrupts = <11 10>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
+ clock-names = "bus", "di0", "di1";
+ resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di0_lvds0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ ipu_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di1_lvds1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds1_in>;
+ };
+
+ ipu_di1_tve: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tve_in>;
+ };
+ };
+ };
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc1: esdhc@50004000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@50008000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+ <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@50020000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc4: esdhc@50024000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
+ aipstz1: bridge@53f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x53f00000 0x60>;
+ };
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ clock-names = "main_clk";
+ status = "okay";
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ clock-names = "main_clk";
+ status = "okay";
+ };
+
+ usbotg: usb@53f80000 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
+ status = "disabled";
+ };
+
+ usbh1: usb@53f80200 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 1>;
+ fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbh2: usb@53f80400 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbh3: usb@53f80600 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53f80800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx53-usbmisc";
+ reg = <0x53f80800 0x200>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ };
+
+ gpio1: gpio@53f84000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53f88000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@53f8c000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@53f90000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp@53f94000 {
+ compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@53f98000 {
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ };
+
+ wdog2: wdog@53f9c000 {
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ gpt: timer@53fa0000 {
+ compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+ reg = <0x53fa0000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
+ clock-names = "ipg", "per";
+ };
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ ldb: ldb@53fa8008 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ldb";
+ reg = <0x53fa8008 0x4>;
+ gpr = <&gpr>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel",
+ "di0", "di1";
+ status = "disabled";
+
+ lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "disabled";
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
+ };
+ };
+
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
+ uart1: serial@53fbc000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: can@53fcc000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <83>;
+ clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ src: src@53fd0000 {
+ compatible = "fsl,imx53-src", "fsl,imx51-src";
+ reg = <0x53fd0000 0x4000>;
+ #reset-cells = <1>;
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
+ gpio5: gpio@53fdc000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@53fe0000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@53fe4000 {
+ compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c3: i2c@53fec000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
+ status = "disabled";
+ };
+
+ uart4: serial@53ff0000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ aipstz2: bridge@63f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x63f00000 0x60>;
+ };
+
+ iim: iim@63f98000 {
+ compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+ reg = <0x63f98000 0x4000>;
+ interrupts = <69>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
+ };
+
+ uart5: serial@63f90000 {
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@63fac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sdma: sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ cspi: cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@63fc4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@63fc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@63fcc000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+ <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ audmux: audmux@63fd0000 {
+ compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ nfc: nand@63fdb000 {
+ compatible = "fsl,imx53-nand";
+ reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+ interrupts = <8>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@63fe8000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fe8000 0x4000>;
+ interrupts = <96>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+ <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 46 0 0>,
+ <&sdma 47 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ tve: tve@63ff0000 {
+ compatible = "fsl,imx53-tve";
+ reg = <0x63ff0000 0x1000>;
+ interrupts = <92>;
+ clocks = <&clks IMX5_CLK_TVE_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>;
+ clock-names = "tve", "di_sel";
+ status = "disabled";
+
+ port {
+ tve_in: endpoint {
+ remote-endpoint = <&ipu_di1_tve>;
+ };
+ };
+ };
+
+ vpu: vpu@63ff4000 {
+ compatible = "fsl,imx53-vpu", "cnm,coda7541";
+ reg = <0x63ff4000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+ <&clks IMX5_CLK_VPU_GATE>;
+ clock-names = "per", "ahb";
+ resets = <&src 1>;
+ iram = <&ocram>;
+ };
+
+ sahara: crypto@63ff8000 {
+ compatible = "fsl,imx53-sahara";
+ reg = <0x63ff8000 0x4000>;
+ interrupts = <19 20>;
+ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+ <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+ clock-names = "ipg", "ahb";
+ };
+ };
+
+ ocram: sram@f8000000 {
+ compatible = "mmio-sram";
+ reg = <0xf8000000 0x20000>;
+ clocks = <&clks IMX5_CLK_OCRAM>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <77>;
+ };
+ };
+};
Code Review / kvmfornfv.git / blobdiff