Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / arm / boot / dts / imx27-apf27.dts
diff --git a/kernel/arch/arm/boot/dts/imx27-apf27.dts b/kernel/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644 (file)
index 0000000..73aae4f
--- /dev/null
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+       model = "Armadeus Systems APF27 module";
+       compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+       memory {
+               reg = <0xa0000000 0x04000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               osc26m {
+                       compatible = "fsl,imx-osc26m", "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+};
+
+&iomuxc {
+       imx27-apf27 {
+               pinctrl_fec1: fec1grp {
+                       fsl,pins = <
+                               MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+                               MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+                               MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+                               MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+                               MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+                               MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+                               MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+                               MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+                               MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+                               MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+                               MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+                               MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+                               MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+                               MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+                               MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+                               MX27_PAD_ATA_DATA13__FEC_COL 0x0
+                               MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+                               MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX27_PAD_UART1_TXD__UART1_TXD 0x0
+                               MX27_PAD_UART1_RXD__UART1_RXD 0x0
+                       >;
+               };
+       };
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
+       status = "okay";
+};
+
+&nfc {
+       status = "okay";
+       nand-bus-width = <16>;
+       nand-ecc-mode = "hw";
+       nand-on-flash-bbt;
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0 0x100000>;
+       };
+
+       partition@100000 {
+               label = "env";
+               reg = <0x100000 0x80000>;
+       };
+
+       partition@180000 {
+               label = "env2";
+               reg = <0x180000 0x80000>;
+       };
+
+       partition@200000 {
+               label = "firmware";
+               reg = <0x200000 0x80000>;
+       };
+
+       partition@280000 {
+               label = "dtb";
+               reg = <0x280000 0x80000>;
+       };
+
+       partition@300000 {
+               label = "kernel";
+               reg = <0x300000 0x500000>;
+       };
+
+       partition@800000 {
+               label = "rootfs";
+               reg = <0x800000 0xf800000>;
+       };
+};