#include "exynos3250.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Samsung Rinato board";
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
min-microvolt = <1100000>;
max-microvolt = <2700000>;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 500MHz */
+ cooling-device = <&cpu0 5 5>;
+ };
+ map1 {
+ /* Corresponds to 200MHz */
+ cooling-device = <&cpu0 8 8>;
+ };
+ };
+ };
+ };
};
&adc {
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
&exynos_usbphy {
status = "okay";
+ vbus-supply = <&safeout_reg>;
};
&hsotg {
reg = <0>;
vdd3-supply = <&ldo16_reg>;
vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 0>;
- te-gpios = <&gpx0 6 0>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
status = "okay";
};
+&jpeg {
+ status = "okay";
+};
+
&mshc_0 {
#address-cells = <1>;
#size-cells = <0>;
};
&rtc {
- clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
status = "okay";
};