Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / arch / arm / boot / dts / bcm28155-ap.dts

diff --git a/kernel/arch/arm/boot/dts/bcm28155-ap.dts b/kernel/arch/arm/boot/dts/bcm28155-ap.dts
new file mode 100644 (file)
index 0000000..9ce91dd
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/bcm28155-ap.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+       model = "BCM28155 AP board";
+       compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+       memory {
+               reg = <0x80000000 0x40000000>; /* 1 GB */
+       };
+
+       uart@3e000000 {
+               status = "okay";
+       };
+
+       i2c@3e016000 {
+               status="okay";
+               clock-frequency = <400000>;
+       };
+
+       i2c@3e017000 {
+               status="okay";
+               clock-frequency = <400000>;
+       };
+
+       i2c@3e018000 {
+               status="okay";
+               clock-frequency = <400000>;
+       };
+
+       i2c@3500d000 {
+               status="okay";
+               clock-frequency = <100000>;
+
+               pmu: pmu@8 {
+                       reg = <0x08>;
+               };
+       };
+
+       sdio2: sdio@3f190000 {
+               non-removable;
+               max-frequency = <48000000>;
+               vmmc-supply = <&camldo1_reg>;
+               vqmmc-supply = <&iosr1_reg>;
+               status = "okay";
+       };
+
+       sdio4: sdio@3f1b0000 {
+               max-frequency = <48000000>;
+               cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               vmmc-supply = <&sdldo_reg>;
+               vqmmc-supply = <&sdxldo_reg>;
+               status = "okay";
+       };
+
+       pwm: pwm@3e01a000 {
+               status = "okay";
+       };
+
+       usbotg: usb@3f120000 {
+               vusb_d-supply = <&usbldo_reg>;
+               vusb_a-supply = <&iosr1_reg>;
+               status = "okay";
+       };
+
+       usbphy: usb-phy@3f130000 {
+               status = "okay";
+       };
+};
+
+#include "bcm59056.dtsi"
+
+&pmu {
+       compatible = "brcm,bcm59056";
+       interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+       regulators {
+               camldo1_reg: camldo1 {
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               sdldo_reg: sdldo {
+                       regulator-min-microvolt = <3000000>;
+                       regulator-max-microvolt = <3000000>;
+               };
+
+               sdxldo_reg: sdxldo {
+                       regulator-min-microvolt = <2700000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               usbldo_reg: usbldo {
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               iosr1_reg: iosr1 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+               };
+       };
+};