--- /dev/null
+Documentation for /proc/sys/net/*
+ (c) 1999 Terrehon Bowden <terrehon@pacbell.net>
+ Bodo Bauer <bb@ricochet.net>
+ (c) 2000 Jorge Nerin <comandante@zaralinux.com>
+ (c) 2009 Shen Feng <shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in README.
+
+==============================================================
+
+This file contains the documentation for the sysctl files in
+/proc/sys/net
+
+The interface to the networking parts of the kernel is located in
+/proc/sys/net. The following table shows all possible subdirectories. You may
+see only some of them, depending on your kernel's configuration.
+
+
+Table : Subdirectories in /proc/sys/net
+..............................................................................
+ Directory Content Directory Content
+ core General parameter appletalk Appletalk protocol
+ unix Unix domain sockets netrom NET/ROM
+ 802 E802 protocol ax25 AX25
+ ethernet Ethernet protocol rose X.25 PLP layer
+ ipv4 IP version 4 x25 X.25 protocol
+ ipx IPX token-ring IBM token ring
+ bridge Bridging decnet DEC net
+ ipv6 IP version 6 tipc TIPC
+..............................................................................
+
+1. /proc/sys/net/core - Network core options
+-------------------------------------------------------
+
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+ 0 - disable the JIT (default value)
+ 1 - enable the JIT
+ 2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
+dev_weight
+--------------
+
+The maximum number of packets that kernel can handle on a NAPI interrupt,
+it's a Per-CPU variable.
+Default: 64
+
+default_qdisc
+--------------
+
+The default queuing discipline to use for network devices. This allows
+overriding the default queue discipline of pfifo_fast with an
+alternative. Since the default queuing discipline is created with the
+no additional parameters so is best suited to queuing disciplines that
+work well without configuration like stochastic fair queue (sfq),
+CoDel (codel) or fair queue CoDel (fq_codel). Don't use queuing disciplines
+like Hierarchical Token Bucket or Deficit Round Robin which require setting
+up classes and bandwidths.
+Default: pfifo_fast
+
+busy_read
+----------------
+Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
+Approximate time in us to busy loop waiting for packets on the device queue.
+This sets the default value of the SO_BUSY_POLL socket option.
+Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
+which is the preferred method of enabling. If you need to enable the feature
+globally via sysctl, a value of 50 is recommended.
+Will increase power usage.
+Default: 0 (off)
+
+busy_poll
+----------------
+Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL)
+Approximate time in us to busy loop waiting for events.
+Recommended value depends on the number of sockets you poll on.
+For several sockets 50, for several hundreds 100.
+For more than that you probably want to use epoll.
+Note that only sockets with SO_BUSY_POLL set will be busy polled,
+so you want to either selectively set SO_BUSY_POLL on those sockets or set
+sysctl.net.busy_read globally.
+Will increase power usage.
+Default: 0 (off)
+
+rmem_default
+------------
+
+The default setting of the socket receive buffer in bytes.
+
+rmem_max
+--------
+
+The maximum receive socket buffer size in bytes.
+
+tstamp_allow_data
+-----------------
+Allow processes to receive tx timestamps looped together with the original
+packet contents. If disabled, transmit timestamp requests from unprivileged
+processes are dropped unless socket option SOF_TIMESTAMPING_OPT_TSONLY is set.
+Default: 1 (on)
+
+
+wmem_default
+------------
+
+The default setting (in bytes) of the socket send buffer.
+
+wmem_max
+--------
+
+The maximum send socket buffer size in bytes.
+
+message_burst and message_cost
+------------------------------
+
+These parameters are used to limit the warning messages written to the kernel
+log from the networking code. They enforce a rate limit to make a
+denial-of-service attack impossible. A higher message_cost factor, results in
+fewer messages that will be written. Message_burst controls when messages will
+be dropped. The default settings limit warning messages to one every five
+seconds.
+
+warnings
+--------
+
+This sysctl is now unused.
+
+This was used to control console messages from the networking stack that
+occur because of problems on the network like duplicate address or bad
+checksums.
+
+These messages are now emitted at KERN_DEBUG and can generally be enabled
+and controlled by the dynamic_debug facility.
+
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner.
+
+netdev_max_backlog
+------------------
+
+Maximum number of packets, queued on the INPUT side, when the interface
+receives packets faster than kernel can process them.
+
+netdev_rss_key
+--------------
+
+RSS (Receive Side Scaling) enabled drivers use a 40 bytes host key that is
+randomly generated.
+Some user space might need to gather its content even if drivers do not
+provide ethtool -x support yet.
+
+myhost:~# cat /proc/sys/net/core/netdev_rss_key
+84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
+
+File contains nul bytes if no driver ever called netdev_rss_key_fill() function.
+Note:
+/proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
+but most drivers only use 40 bytes of it.
+
+myhost:~# ethtool -x eth0
+RX flow hash indirection table for eth0 with 8 RX ring(s):
+ 0: 0 1 2 3 4 5 6 7
+RSS hash key:
+84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
+
+netdev_tstamp_prequeue
+----------------------
+
+If set to 0, RX packet timestamps can be sampled after RPS processing, when
+the target CPU processes packets. It might give some delay on timestamps, but
+permit to distribute the load on several cpus.
+
+If set to 1 (default), timestamps are sampled as soon as possible, before
+queueing.
+
+optmem_max
+----------
+
+Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence
+of struct cmsghdr structures with appended data.
+
+2. /proc/sys/net/unix - Parameters for Unix domain sockets
+-------------------------------------------------------
+
+There is only one file in this directory.
+unix_dgram_qlen limits the max number of datagrams queued in Unix domain
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
+
+
+3. /proc/sys/net/ipv4 - IPV4 settings
+-------------------------------------------------------
+Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
+descriptions of these entries.
+
+
+4. Appletalk
+-------------------------------------------------------
+
+The /proc/sys/net/appletalk directory holds the Appletalk configuration data
+when Appletalk is loaded. The configurable parameters are:
+
+aarp-expiry-time
+----------------
+
+The amount of time we keep an ARP entry before expiring it. Used to age out
+old hosts.
+
+aarp-resolve-time
+-----------------
+
+The amount of time we will spend trying to resolve an Appletalk address.
+
+aarp-retransmit-limit
+---------------------
+
+The number of times we will retransmit a query before giving up.
+
+aarp-tick-time
+--------------
+
+Controls the rate at which expires are checked.
+
+The directory /proc/net/appletalk holds the list of active Appletalk sockets
+on a machine.
+
+The fields indicate the DDP type, the local address (in network:node format)
+the remote address, the size of the transmit pending queue, the size of the
+received queue (bytes waiting for applications to read) the state and the uid
+owning the socket.
+
+/proc/net/atalk_iface lists all the interfaces configured for appletalk.It
+shows the name of the interface, its Appletalk address, the network range on
+that address (or network number for phase 1 networks), and the status of the
+interface.
+
+/proc/net/atalk_route lists each known network route. It lists the target
+(network) that the route leads to, the router (may be directly connected), the
+route flags, and the device the route is using.
+
+
+5. IPX
+-------------------------------------------------------
+
+The IPX protocol has no tunable values in proc/sys/net.
+
+The IPX protocol does, however, provide proc/net/ipx. This lists each IPX
+socket giving the local and remote addresses in Novell format (that is
+network:node:port). In accordance with the strange Novell tradition,
+everything but the port is in hex. Not_Connected is displayed for sockets that
+are not tied to a specific remote address. The Tx and Rx queue sizes indicate
+the number of bytes pending for transmission and reception. The state
+indicates the state the socket is in and the uid is the owning uid of the
+socket.
+
+The /proc/net/ipx_interface file lists all IPX interfaces. For each interface
+it gives the network number, the node number, and indicates if the network is
+the primary network. It also indicates which device it is bound to (or
+Internal for internal networks) and the Frame Type if appropriate. Linux
+supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for
+IPX.
+
+The /proc/net/ipx_route table holds a list of IPX routes. For each route it
+gives the destination network, the router node (or Directly) and the network
+address of the router (or Connected) for internal networks.
+
+6. TIPC
+-------------------------------------------------------
+
+tipc_rmem
+----------
+
+The TIPC protocol now has a tunable for the receive memory, similar to the
+tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max)
+
+ # cat /proc/sys/net/tipc/tipc_rmem
+ 4252725 34021800 68043600
+ #
+
+The max value is set to CONN_OVERLOAD_LIMIT, and the default and min values
+are scaled (shifted) versions of that same value. Note that the min value
+is not at this point in time used in any meaningful way, but the triplet is
+preserved in order to be consistent with things like tcp_rmem.
+
+named_timeout
+--------------
+
+TIPC name table updates are distributed asynchronously in a cluster, without
+any form of transaction handling. This means that different race scenarios are
+possible. One such is that a name withdrawal sent out by one node and received
+by another node may arrive after a second, overlapping name publication already
+has been accepted from a third node, although the conflicting updates
+originally may have been issued in the correct sequential order.
+If named_timeout is nonzero, failed topology updates will be placed on a defer
+queue until another event arrives that clears the error, or until the timeout
+expires. Value is in milliseconds.
Code Review / kvmfornfv.git / blobdiff