Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / hwmon / tmp401

diff --git a/kernel/Documentation/hwmon/tmp401 b/kernel/Documentation/hwmon/tmp401
new file mode 100644 (file)
index 0000000..711f75e
--- /dev/null
+++ b/kernel/Documentation/hwmon/tmp401
@@ -0,0 +1,57 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c, 0x4d, 0x4e
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+  * Texas Instruments TMP431
+    Prefix: 'tmp431'
+    Addresses scanned: I2C 0x4c, 0x4d
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html
+  * Texas Instruments TMP432
+    Prefix: 'tmp432'
+    Addresses scanned: I2C 0x4c, 0x4d
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+  * Texas Instruments TMP435
+    Prefix: 'tmp435'
+    Addresses scanned: I2C 0x48 - 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+        Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401, TMP411,
+TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
+and one local temperature sensors. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides
+some additional features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.
+
+TMP432 is compatible with TMP401 and TMP431. It supports two external
+temperature sensors.