Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / hwmon / menf21bmc

diff --git a/kernel/Documentation/hwmon/menf21bmc b/kernel/Documentation/hwmon/menf21bmc
new file mode 100644 (file)
index 0000000..2a273a0
--- /dev/null
+++ b/kernel/Documentation/hwmon/menf21bmc
@@ -0,0 +1,50 @@
+Kernel driver menf21bmc_hwmon
+=============================
+
+Supported chips:
+       * MEN 14F021P00
+         Prefix: 'menf21bmc_hwmon'
+         Adresses scanned: -
+
+Author: Andreas Werner <andreas.werner@men.de>
+
+Description
+-----------
+
+The menf21bmc is a Board Management Controller (BMC) which provides an I2C
+interface to the host to access the features implemented in the BMC.
+
+This driver gives access to the voltage monitoring feature of the main
+voltages of the board.
+The voltage sensors are connected to the ADC inputs of the BMC which is
+a PIC16F917 Mikrocontroller.
+
+Usage Notes
+-----------
+
+This driver is part of the MFD driver named "menf21bmc" and does
+not auto-detect devices.
+You will have to instantiate the MFD driver explicitly.
+Please see Documentation/i2c/instantiating-devices for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read only
+The Limits are read once by the driver.
+
+in0_input      +3.3V input voltage
+in1_input      +5.0V input voltage
+in2_input      +12.0V input voltage
+in3_input      +5V Standby input voltage
+in4_input      VBAT (on board battery)
+
+in[0-4]_min    Minimum voltage limit
+in[0-4]_max    Maximum voltage limit
+
+in0_label      "MON_3_3V"
+in1_label      "MON_5V"
+in2_label      "MON_12V"
+in3_label      "5V_STANDBY"
+in4_label      "VBAT"