--- /dev/null
+
+The SGI XFS Filesystem
+======================
+
+XFS is a high performance journaling filesystem which originated
+on the SGI IRIX platform. It is completely multi-threaded, can
+support large files and large filesystems, extended attributes,
+variable block sizes, is extent based, and makes extensive use of
+Btrees (directories, extents, free space) to aid both performance
+and scalability.
+
+Refer to the documentation at http://oss.sgi.com/projects/xfs/
+for further details. This implementation is on-disk compatible
+with the IRIX version of XFS.
+
+
+Mount Options
+=============
+
+When mounting an XFS filesystem, the following options are accepted.
+For boolean mount options, the names with the (*) suffix is the
+default behaviour.
+
+ allocsize=size
+ Sets the buffered I/O end-of-file preallocation size when
+ doing delayed allocation writeout (default size is 64KiB).
+ Valid values for this option are page size (typically 4KiB)
+ through to 1GiB, inclusive, in power-of-2 increments.
+
+ The default behaviour is for dynamic end-of-file
+ preallocation size, which uses a set of heuristics to
+ optimise the preallocation size based on the current
+ allocation patterns within the file and the access patterns
+ to the file. Specifying a fixed allocsize value turns off
+ the dynamic behaviour.
+
+ attr2
+ noattr2
+ The options enable/disable an "opportunistic" improvement to
+ be made in the way inline extended attributes are stored
+ on-disk. When the new form is used for the first time when
+ attr2 is selected (either when setting or removing extended
+ attributes) the on-disk superblock feature bit field will be
+ updated to reflect this format being in use.
+
+ The default behaviour is determined by the on-disk feature
+ bit indicating that attr2 behaviour is active. If either
+ mount option it set, then that becomes the new default used
+ by the filesystem.
+
+ CRC enabled filesystems always use the attr2 format, and so
+ will reject the noattr2 mount option if it is set.
+
+ barrier (*)
+ nobarrier
+ Enables/disables the use of block layer write barriers for
+ writes into the journal and for data integrity operations.
+ This allows for drive level write caching to be enabled, for
+ devices that support write barriers.
+
+ discard
+ nodiscard (*)
+ Enable/disable the issuing of commands to let the block
+ device reclaim space freed by the filesystem. This is
+ useful for SSD devices, thinly provisioned LUNs and virtual
+ machine images, but may have a performance impact.
+
+ Note: It is currently recommended that you use the fstrim
+ application to discard unused blocks rather than the discard
+ mount option because the performance impact of this option
+ is quite severe.
+
+ grpid/bsdgroups
+ nogrpid/sysvgroups (*)
+ These options define what group ID a newly created file
+ gets. When grpid is set, it takes the group ID of the
+ directory in which it is created; otherwise it takes the
+ fsgid of the current process, unless the directory has the
+ setgid bit set, in which case it takes the gid from the
+ parent directory, and also gets the setgid bit set if it is
+ a directory itself.
+
+ filestreams
+ Make the data allocator use the filestreams allocation mode
+ across the entire filesystem rather than just on directories
+ configured to use it.
+
+ ikeep
+ noikeep (*)
+ When ikeep is specified, XFS does not delete empty inode
+ clusters and keeps them around on disk. When noikeep is
+ specified, empty inode clusters are returned to the free
+ space pool.
+
+ inode32
+ inode64 (*)
+ When inode32 is specified, it indicates that XFS limits
+ inode creation to locations which will not result in inode
+ numbers with more than 32 bits of significance.
+
+ When inode64 is specified, it indicates that XFS is allowed
+ to create inodes at any location in the filesystem,
+ including those which will result in inode numbers occupying
+ more than 32 bits of significance.
+
+ inode32 is provided for backwards compatibility with older
+ systems and applications, since 64 bits inode numbers might
+ cause problems for some applications that cannot handle
+ large inode numbers. If applications are in use which do
+ not handle inode numbers bigger than 32 bits, the inode32
+ option should be specified.
+
+
+ largeio
+ nolargeio (*)
+ If "nolargeio" is specified, the optimal I/O reported in
+ st_blksize by stat(2) will be as small as possible to allow
+ user applications to avoid inefficient read/modify/write
+ I/O. This is typically the page size of the machine, as
+ this is the granularity of the page cache.
+
+ If "largeio" specified, a filesystem that was created with a
+ "swidth" specified will return the "swidth" value (in bytes)
+ in st_blksize. If the filesystem does not have a "swidth"
+ specified but does specify an "allocsize" then "allocsize"
+ (in bytes) will be returned instead. Otherwise the behaviour
+ is the same as if "nolargeio" was specified.
+
+ logbufs=value
+ Set the number of in-memory log buffers. Valid numbers
+ range from 2-8 inclusive.
+
+ The default value is 8 buffers.
+
+ If the memory cost of 8 log buffers is too high on small
+ systems, then it may be reduced at some cost to performance
+ on metadata intensive workloads. The logbsize option below
+ controls the size of each buffer and so is also relevant to
+ this case.
+
+ logbsize=value
+ Set the size of each in-memory log buffer. The size may be
+ specified in bytes, or in kilobytes with a "k" suffix.
+ Valid sizes for version 1 and version 2 logs are 16384 (16k)
+ and 32768 (32k). Valid sizes for version 2 logs also
+ include 65536 (64k), 131072 (128k) and 262144 (256k). The
+ logbsize must be an integer multiple of the log
+ stripe unit configured at mkfs time.
+
+ The default value for for version 1 logs is 32768, while the
+ default value for version 2 logs is MAX(32768, log_sunit).
+
+ logdev=device and rtdev=device
+ Use an external log (metadata journal) and/or real-time device.
+ An XFS filesystem has up to three parts: a data section, a log
+ section, and a real-time section. The real-time section is
+ optional, and the log section can be separate from the data
+ section or contained within it.
+
+ noalign
+ Data allocations will not be aligned at stripe unit
+ boundaries. This is only relevant to filesystems created
+ with non-zero data alignment parameters (sunit, swidth) by
+ mkfs.
+
+ norecovery
+ The filesystem will be mounted without running log recovery.
+ If the filesystem was not cleanly unmounted, it is likely to
+ be inconsistent when mounted in "norecovery" mode.
+ Some files or directories may not be accessible because of this.
+ Filesystems mounted "norecovery" must be mounted read-only or
+ the mount will fail.
+
+ nouuid
+ Don't check for double mounted file systems using the file
+ system uuid. This is useful to mount LVM snapshot volumes,
+ and often used in combination with "norecovery" for mounting
+ read-only snapshots.
+
+ noquota
+ Forcibly turns off all quota accounting and enforcement
+ within the filesystem.
+
+ uquota/usrquota/uqnoenforce/quota
+ User disk quota accounting enabled, and limits (optionally)
+ enforced. Refer to xfs_quota(8) for further details.
+
+ gquota/grpquota/gqnoenforce
+ Group disk quota accounting enabled and limits (optionally)
+ enforced. Refer to xfs_quota(8) for further details.
+
+ pquota/prjquota/pqnoenforce
+ Project disk quota accounting enabled and limits (optionally)
+ enforced. Refer to xfs_quota(8) for further details.
+
+ sunit=value and swidth=value
+ Used to specify the stripe unit and width for a RAID device
+ or a stripe volume. "value" must be specified in 512-byte
+ block units. These options are only relevant to filesystems
+ that were created with non-zero data alignment parameters.
+
+ The sunit and swidth parameters specified must be compatible
+ with the existing filesystem alignment characteristics. In
+ general, that means the only valid changes to sunit are
+ increasing it by a power-of-2 multiple. Valid swidth values
+ are any integer multiple of a valid sunit value.
+
+ Typically the only time these mount options are necessary if
+ after an underlying RAID device has had it's geometry
+ modified, such as adding a new disk to a RAID5 lun and
+ reshaping it.
+
+ swalloc
+ Data allocations will be rounded up to stripe width boundaries
+ when the current end of file is being extended and the file
+ size is larger than the stripe width size.
+
+ wsync
+ When specified, all filesystem namespace operations are
+ executed synchronously. This ensures that when the namespace
+ operation (create, unlink, etc) completes, the change to the
+ namespace is on stable storage. This is useful in HA setups
+ where failover must not result in clients seeing
+ inconsistent namespace presentation during or after a
+ failover event.
+
+
+Deprecated Mount Options
+========================
+
+None at present.
+
+
+Removed Mount Options
+=====================
+
+ Name Removed
+ ---- -------
+ delaylog/nodelaylog v3.20
+ ihashsize v3.20
+ irixsgid v3.20
+ osyncisdsync/osyncisosync v3.20
+
+
+sysctls
+=======
+
+The following sysctls are available for the XFS filesystem:
+
+ fs.xfs.stats_clear (Min: 0 Default: 0 Max: 1)
+ Setting this to "1" clears accumulated XFS statistics
+ in /proc/fs/xfs/stat. It then immediately resets to "0".
+
+ fs.xfs.xfssyncd_centisecs (Min: 100 Default: 3000 Max: 720000)
+ The interval at which the filesystem flushes metadata
+ out to disk and runs internal cache cleanup routines.
+
+ fs.xfs.filestream_centisecs (Min: 1 Default: 3000 Max: 360000)
+ The interval at which the filesystem ages filestreams cache
+ references and returns timed-out AGs back to the free stream
+ pool.
+
+ fs.xfs.speculative_prealloc_lifetime
+ (Units: seconds Min: 1 Default: 300 Max: 86400)
+ The interval at which the background scanning for inodes
+ with unused speculative preallocation runs. The scan
+ removes unused preallocation from clean inodes and releases
+ the unused space back to the free pool.
+
+ fs.xfs.error_level (Min: 0 Default: 3 Max: 11)
+ A volume knob for error reporting when internal errors occur.
+ This will generate detailed messages & backtraces for filesystem
+ shutdowns, for example. Current threshold values are:
+
+ XFS_ERRLEVEL_OFF: 0
+ XFS_ERRLEVEL_LOW: 1
+ XFS_ERRLEVEL_HIGH: 5
+
+ fs.xfs.panic_mask (Min: 0 Default: 0 Max: 255)
+ Causes certain error conditions to call BUG(). Value is a bitmask;
+ OR together the tags which represent errors which should cause panics:
+
+ XFS_NO_PTAG 0
+ XFS_PTAG_IFLUSH 0x00000001
+ XFS_PTAG_LOGRES 0x00000002
+ XFS_PTAG_AILDELETE 0x00000004
+ XFS_PTAG_ERROR_REPORT 0x00000008
+ XFS_PTAG_SHUTDOWN_CORRUPT 0x00000010
+ XFS_PTAG_SHUTDOWN_IOERROR 0x00000020
+ XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040
+ XFS_PTAG_FSBLOCK_ZERO 0x00000080
+
+ This option is intended for debugging only.
+
+ fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1)
+ Controls whether symlinks are created with mode 0777 (default)
+ or whether their mode is affected by the umask (irix mode).
+
+ fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1)
+ Controls files created in SGID directories.
+ If the group ID of the new file does not match the effective group
+ ID or one of the supplementary group IDs of the parent dir, the
+ ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl
+ is set.
+
+ fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "sync" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.inherit_nodump (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "nodump" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.inherit_noatime (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "noatime" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.inherit_nosymlinks (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "nosymlinks" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.inherit_nodefrag (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "nodefrag" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.rotorstep (Min: 1 Default: 1 Max: 256)
+ In "inode32" allocation mode, this option determines how many
+ files the allocator attempts to allocate in the same allocation
+ group before moving to the next allocation group. The intent
+ is to control the rate at which the allocator moves between
+ allocation groups when allocating extents for new files.
+
+Deprecated Sysctls
+==================
+
+None at present.
+
+
+Removed Sysctls
+===============
+
+ Name Removed
+ ---- -------
+ fs.xfs.xfsbufd_centisec v3.20
+ fs.xfs.age_buffer_centisecs v3.20
Code Review / kvmfornfv.git / blobdiff