--- /dev/null
+------------------------------------------------------------------------------
+ T H E /proc F I L E S Y S T E M
+------------------------------------------------------------------------------
+/proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999
+ Bodo Bauer <bb@ricochet.net>
+
+2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
+move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
+------------------------------------------------------------------------------
+Version 1.3 Kernel version 2.2.12
+ Kernel version 2.4.0-test11-pre4
+------------------------------------------------------------------------------
+fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
+
+Table of Contents
+-----------------
+
+ 0 Preface
+ 0.1 Introduction/Credits
+ 0.2 Legal Stuff
+
+ 1 Collecting System Information
+ 1.1 Process-Specific Subdirectories
+ 1.2 Kernel data
+ 1.3 IDE devices in /proc/ide
+ 1.4 Networking info in /proc/net
+ 1.5 SCSI info
+ 1.6 Parallel port info in /proc/parport
+ 1.7 TTY info in /proc/tty
+ 1.8 Miscellaneous kernel statistics in /proc/stat
+ 1.9 Ext4 file system parameters
+
+ 2 Modifying System Parameters
+
+ 3 Per-Process Parameters
+ 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+ score
+ 3.2 /proc/<pid>/oom_score - Display current oom-killer score
+ 3.3 /proc/<pid>/io - Display the IO accounting fields
+ 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
+ 3.5 /proc/<pid>/mountinfo - Information about mounts
+ 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
+ 3.7 /proc/<pid>/task/<tid>/children - Information about task children
+ 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
+ 3.9 /proc/<pid>/map_files - Information about memory mapped files
+
+ 4 Configuring procfs
+ 4.1 Mount options
+
+------------------------------------------------------------------------------
+Preface
+------------------------------------------------------------------------------
+
+0.1 Introduction/Credits
+------------------------
+
+This documentation is part of a soon (or so we hope) to be released book on
+the SuSE Linux distribution. As there is no complete documentation for the
+/proc file system and we've used many freely available sources to write these
+chapters, it seems only fair to give the work back to the Linux community.
+This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
+afraid it's still far from complete, but we hope it will be useful. As far as
+we know, it is the first 'all-in-one' document about the /proc file system. It
+is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
+SPARC, AXP, etc., features, you probably won't find what you are looking for.
+It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
+additions and patches are welcome and will be added to this document if you
+mail them to Bodo.
+
+We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
+other people for help compiling this documentation. We'd also like to extend a
+special thank you to Andi Kleen for documentation, which we relied on heavily
+to create this document, as well as the additional information he provided.
+Thanks to everybody else who contributed source or docs to the Linux kernel
+and helped create a great piece of software... :)
+
+If you have any comments, corrections or additions, please don't hesitate to
+contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
+document.
+
+The latest version of this document is available online at
+http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
+
+If the above direction does not works for you, you could try the kernel
+mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
+comandante@zaralinux.com.
+
+0.2 Legal Stuff
+---------------
+
+We don't guarantee the correctness of this document, and if you come to us
+complaining about how you screwed up your system because of incorrect
+documentation, we won't feel responsible...
+
+------------------------------------------------------------------------------
+CHAPTER 1: COLLECTING SYSTEM INFORMATION
+------------------------------------------------------------------------------
+
+------------------------------------------------------------------------------
+In This Chapter
+------------------------------------------------------------------------------
+* Investigating the properties of the pseudo file system /proc and its
+ ability to provide information on the running Linux system
+* Examining /proc's structure
+* Uncovering various information about the kernel and the processes running
+ on the system
+------------------------------------------------------------------------------
+
+
+The proc file system acts as an interface to internal data structures in the
+kernel. It can be used to obtain information about the system and to change
+certain kernel parameters at runtime (sysctl).
+
+First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
+show you how you can use /proc/sys to change settings.
+
+1.1 Process-Specific Subdirectories
+-----------------------------------
+
+The directory /proc contains (among other things) one subdirectory for each
+process running on the system, which is named after the process ID (PID).
+
+The link self points to the process reading the file system. Each process
+subdirectory has the entries listed in Table 1-1.
+
+
+Table 1-1: Process specific entries in /proc
+..............................................................................
+ File Content
+ clear_refs Clears page referenced bits shown in smaps output
+ cmdline Command line arguments
+ cpu Current and last cpu in which it was executed (2.4)(smp)
+ cwd Link to the current working directory
+ environ Values of environment variables
+ exe Link to the executable of this process
+ fd Directory, which contains all file descriptors
+ maps Memory maps to executables and library files (2.4)
+ mem Memory held by this process
+ root Link to the root directory of this process
+ stat Process status
+ statm Process memory status information
+ status Process status in human readable form
+ wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
+ pagemap Page table
+ stack Report full stack trace, enable via CONFIG_STACKTRACE
+ smaps a extension based on maps, showing the memory consumption of
+ each mapping and flags associated with it
+ numa_maps an extension based on maps, showing the memory locality and
+ binding policy as well as mem usage (in pages) of each mapping.
+..............................................................................
+
+For example, to get the status information of a process, all you have to do is
+read the file /proc/PID/status:
+
+ >cat /proc/self/status
+ Name: cat
+ State: R (running)
+ Tgid: 5452
+ Pid: 5452
+ PPid: 743
+ TracerPid: 0 (2.4)
+ Uid: 501 501 501 501
+ Gid: 100 100 100 100
+ FDSize: 256
+ Groups: 100 14 16
+ VmPeak: 5004 kB
+ VmSize: 5004 kB
+ VmLck: 0 kB
+ VmHWM: 476 kB
+ VmRSS: 476 kB
+ VmData: 156 kB
+ VmStk: 88 kB
+ VmExe: 68 kB
+ VmLib: 1412 kB
+ VmPTE: 20 kb
+ VmSwap: 0 kB
+ Threads: 1
+ SigQ: 0/28578
+ SigPnd: 0000000000000000
+ ShdPnd: 0000000000000000
+ SigBlk: 0000000000000000
+ SigIgn: 0000000000000000
+ SigCgt: 0000000000000000
+ CapInh: 00000000fffffeff
+ CapPrm: 0000000000000000
+ CapEff: 0000000000000000
+ CapBnd: ffffffffffffffff
+ Seccomp: 0
+ voluntary_ctxt_switches: 0
+ nonvoluntary_ctxt_switches: 1
+
+This shows you nearly the same information you would get if you viewed it with
+the ps command. In fact, ps uses the proc file system to obtain its
+information. But you get a more detailed view of the process by reading the
+file /proc/PID/status. It fields are described in table 1-2.
+
+The statm file contains more detailed information about the process
+memory usage. Its seven fields are explained in Table 1-3. The stat file
+contains details information about the process itself. Its fields are
+explained in Table 1-4.
+
+(for SMP CONFIG users)
+For making accounting scalable, RSS related information are handled in an
+asynchronous manner and the value may not be very precise. To see a precise
+snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
+It's slow but very precise.
+
+Table 1-2: Contents of the status files (as of 3.20.0)
+..............................................................................
+ Field Content
+ Name filename of the executable
+ State state (R is running, S is sleeping, D is sleeping
+ in an uninterruptible wait, Z is zombie,
+ T is traced or stopped)
+ Tgid thread group ID
+ Ngid NUMA group ID (0 if none)
+ Pid process id
+ PPid process id of the parent process
+ TracerPid PID of process tracing this process (0 if not)
+ Uid Real, effective, saved set, and file system UIDs
+ Gid Real, effective, saved set, and file system GIDs
+ FDSize number of file descriptor slots currently allocated
+ Groups supplementary group list
+ NStgid descendant namespace thread group ID hierarchy
+ NSpid descendant namespace process ID hierarchy
+ NSpgid descendant namespace process group ID hierarchy
+ NSsid descendant namespace session ID hierarchy
+ VmPeak peak virtual memory size
+ VmSize total program size
+ VmLck locked memory size
+ VmHWM peak resident set size ("high water mark")
+ VmRSS size of memory portions
+ VmData size of data, stack, and text segments
+ VmStk size of data, stack, and text segments
+ VmExe size of text segment
+ VmLib size of shared library code
+ VmPTE size of page table entries
+ VmSwap size of swap usage (the number of referred swapents)
+ Threads number of threads
+ SigQ number of signals queued/max. number for queue
+ SigPnd bitmap of pending signals for the thread
+ ShdPnd bitmap of shared pending signals for the process
+ SigBlk bitmap of blocked signals
+ SigIgn bitmap of ignored signals
+ SigCgt bitmap of caught signals
+ CapInh bitmap of inheritable capabilities
+ CapPrm bitmap of permitted capabilities
+ CapEff bitmap of effective capabilities
+ CapBnd bitmap of capabilities bounding set
+ Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...)
+ Cpus_allowed mask of CPUs on which this process may run
+ Cpus_allowed_list Same as previous, but in "list format"
+ Mems_allowed mask of memory nodes allowed to this process
+ Mems_allowed_list Same as previous, but in "list format"
+ voluntary_ctxt_switches number of voluntary context switches
+ nonvoluntary_ctxt_switches number of non voluntary context switches
+..............................................................................
+
+Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
+..............................................................................
+ Field Content
+ size total program size (pages) (same as VmSize in status)
+ resident size of memory portions (pages) (same as VmRSS in status)
+ shared number of pages that are shared (i.e. backed by a file)
+ trs number of pages that are 'code' (not including libs; broken,
+ includes data segment)
+ lrs number of pages of library (always 0 on 2.6)
+ drs number of pages of data/stack (including libs; broken,
+ includes library text)
+ dt number of dirty pages (always 0 on 2.6)
+..............................................................................
+
+
+Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
+..............................................................................
+ Field Content
+ pid process id
+ tcomm filename of the executable
+ state state (R is running, S is sleeping, D is sleeping in an
+ uninterruptible wait, Z is zombie, T is traced or stopped)
+ ppid process id of the parent process
+ pgrp pgrp of the process
+ sid session id
+ tty_nr tty the process uses
+ tty_pgrp pgrp of the tty
+ flags task flags
+ min_flt number of minor faults
+ cmin_flt number of minor faults with child's
+ maj_flt number of major faults
+ cmaj_flt number of major faults with child's
+ utime user mode jiffies
+ stime kernel mode jiffies
+ cutime user mode jiffies with child's
+ cstime kernel mode jiffies with child's
+ priority priority level
+ nice nice level
+ num_threads number of threads
+ it_real_value (obsolete, always 0)
+ start_time time the process started after system boot
+ vsize virtual memory size
+ rss resident set memory size
+ rsslim current limit in bytes on the rss
+ start_code address above which program text can run
+ end_code address below which program text can run
+ start_stack address of the start of the main process stack
+ esp current value of ESP
+ eip current value of EIP
+ pending bitmap of pending signals
+ blocked bitmap of blocked signals
+ sigign bitmap of ignored signals
+ sigcatch bitmap of caught signals
+ wchan address where process went to sleep
+ 0 (place holder)
+ 0 (place holder)
+ exit_signal signal to send to parent thread on exit
+ task_cpu which CPU the task is scheduled on
+ rt_priority realtime priority
+ policy scheduling policy (man sched_setscheduler)
+ blkio_ticks time spent waiting for block IO
+ gtime guest time of the task in jiffies
+ cgtime guest time of the task children in jiffies
+ start_data address above which program data+bss is placed
+ end_data address below which program data+bss is placed
+ start_brk address above which program heap can be expanded with brk()
+ arg_start address above which program command line is placed
+ arg_end address below which program command line is placed
+ env_start address above which program environment is placed
+ env_end address below which program environment is placed
+ exit_code the thread's exit_code in the form reported by the waitpid system call
+..............................................................................
+
+The /proc/PID/maps file containing the currently mapped memory regions and
+their access permissions.
+
+The format is:
+
+address perms offset dev inode pathname
+
+08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
+08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
+0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
+a7cb1000-a7cb2000 ---p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7eb2000-a7eb3000 ---p 00000000 00:00 0
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack:1001]
+a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
+a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
+a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
+a800b000-a800e000 rw-p 00000000 00:00 0
+a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
+a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
+a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
+a8024000-a8027000 rw-p 00000000 00:00 0
+a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
+a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
+a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
+aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
+ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
+
+where "address" is the address space in the process that it occupies, "perms"
+is a set of permissions:
+
+ r = read
+ w = write
+ x = execute
+ s = shared
+ p = private (copy on write)
+
+"offset" is the offset into the mapping, "dev" is the device (major:minor), and
+"inode" is the inode on that device. 0 indicates that no inode is associated
+with the memory region, as the case would be with BSS (uninitialized data).
+The "pathname" shows the name associated file for this mapping. If the mapping
+is not associated with a file:
+
+ [heap] = the heap of the program
+ [stack] = the stack of the main process
+ [stack:1001] = the stack of the thread with tid 1001
+ [vdso] = the "virtual dynamic shared object",
+ the kernel system call handler
+
+ or if empty, the mapping is anonymous.
+
+The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
+of the individual tasks of a process. In this file you will see a mapping marked
+as [stack] if that task sees it as a stack. This is a key difference from the
+content of /proc/PID/maps, where you will see all mappings that are being used
+as stack by all of those tasks. Hence, for the example above, the task-level
+map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+
+08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
+08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
+0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
+a7cb1000-a7cb2000 ---p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7eb2000-a7eb3000 ---p 00000000 00:00 0
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack]
+a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
+a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
+a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
+a800b000-a800e000 rw-p 00000000 00:00 0
+a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
+a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
+a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
+a8024000-a8027000 rw-p 00000000 00:00 0
+a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
+a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
+a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
+aff35000-aff4a000 rw-p 00000000 00:00 0
+ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
+
+The /proc/PID/smaps is an extension based on maps, showing the memory
+consumption for each of the process's mappings. For each of mappings there
+is a series of lines such as the following:
+
+08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
+Size: 1084 kB
+Rss: 892 kB
+Pss: 374 kB
+Shared_Clean: 892 kB
+Shared_Dirty: 0 kB
+Private_Clean: 0 kB
+Private_Dirty: 0 kB
+Referenced: 892 kB
+Anonymous: 0 kB
+Swap: 0 kB
+KernelPageSize: 4 kB
+MMUPageSize: 4 kB
+Locked: 374 kB
+VmFlags: rd ex mr mw me de
+
+the first of these lines shows the same information as is displayed for the
+mapping in /proc/PID/maps. The remaining lines show the size of the mapping
+(size), the amount of the mapping that is currently resident in RAM (RSS), the
+process' proportional share of this mapping (PSS), the number of clean and
+dirty private pages in the mapping. Note that even a page which is part of a
+MAP_SHARED mapping, but has only a single pte mapped, i.e. is currently used
+by only one process, is accounted as private and not as shared. "Referenced"
+indicates the amount of memory currently marked as referenced or accessed.
+"Anonymous" shows the amount of memory that does not belong to any file. Even
+a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
+and a page is modified, the file page is replaced by a private anonymous copy.
+"Swap" shows how much would-be-anonymous memory is also used, but out on
+swap.
+
+"VmFlags" field deserves a separate description. This member represents the kernel
+flags associated with the particular virtual memory area in two letter encoded
+manner. The codes are the following:
+ rd - readable
+ wr - writeable
+ ex - executable
+ sh - shared
+ mr - may read
+ mw - may write
+ me - may execute
+ ms - may share
+ gd - stack segment growns down
+ pf - pure PFN range
+ dw - disabled write to the mapped file
+ lo - pages are locked in memory
+ io - memory mapped I/O area
+ sr - sequential read advise provided
+ rr - random read advise provided
+ dc - do not copy area on fork
+ de - do not expand area on remapping
+ ac - area is accountable
+ nr - swap space is not reserved for the area
+ ht - area uses huge tlb pages
+ nl - non-linear mapping
+ ar - architecture specific flag
+ dd - do not include area into core dump
+ sd - soft-dirty flag
+ mm - mixed map area
+ hg - huge page advise flag
+ nh - no-huge page advise flag
+ mg - mergable advise flag
+
+Note that there is no guarantee that every flag and associated mnemonic will
+be present in all further kernel releases. Things get changed, the flags may
+be vanished or the reverse -- new added.
+
+This file is only present if the CONFIG_MMU kernel configuration option is
+enabled.
+
+The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
+bits on both physical and virtual pages associated with a process, and the
+soft-dirty bit on pte (see Documentation/vm/soft-dirty.txt for details).
+To clear the bits for all the pages associated with the process
+ > echo 1 > /proc/PID/clear_refs
+
+To clear the bits for the anonymous pages associated with the process
+ > echo 2 > /proc/PID/clear_refs
+
+To clear the bits for the file mapped pages associated with the process
+ > echo 3 > /proc/PID/clear_refs
+
+To clear the soft-dirty bit
+ > echo 4 > /proc/PID/clear_refs
+
+To reset the peak resident set size ("high water mark") to the process's
+current value:
+ > echo 5 > /proc/PID/clear_refs
+
+Any other value written to /proc/PID/clear_refs will have no effect.
+
+The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
+using /proc/kpageflags and number of times a page is mapped using
+/proc/kpagecount. For detailed explanation, see Documentation/vm/pagemap.txt.
+
+The /proc/pid/numa_maps is an extension based on maps, showing the memory
+locality and binding policy, as well as the memory usage (in pages) of
+each mapping. The output follows a general format where mapping details get
+summarized separated by blank spaces, one mapping per each file line:
+
+address policy mapping details
+
+00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
+00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
+320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
+320698b000 default file=/lib64/libc-2.12.so
+3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
+3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
+3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
+7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
+7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
+7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
+7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
+7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
+
+Where:
+"address" is the starting address for the mapping;
+"policy" reports the NUMA memory policy set for the mapping (see vm/numa_memory_policy.txt);
+"mapping details" summarizes mapping data such as mapping type, page usage counters,
+node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
+size, in KB, that is backing the mapping up.
+
+1.2 Kernel data
+---------------
+
+Similar to the process entries, the kernel data files give information about
+the running kernel. The files used to obtain this information are contained in
+/proc and are listed in Table 1-5. Not all of these will be present in your
+system. It depends on the kernel configuration and the loaded modules, which
+files are there, and which are missing.
+
+Table 1-5: Kernel info in /proc
+..............................................................................
+ File Content
+ apm Advanced power management info
+ buddyinfo Kernel memory allocator information (see text) (2.5)
+ bus Directory containing bus specific information
+ cmdline Kernel command line
+ cpuinfo Info about the CPU
+ devices Available devices (block and character)
+ dma Used DMS channels
+ filesystems Supported filesystems
+ driver Various drivers grouped here, currently rtc (2.4)
+ execdomains Execdomains, related to security (2.4)
+ fb Frame Buffer devices (2.4)
+ fs File system parameters, currently nfs/exports (2.4)
+ ide Directory containing info about the IDE subsystem
+ interrupts Interrupt usage
+ iomem Memory map (2.4)
+ ioports I/O port usage
+ irq Masks for irq to cpu affinity (2.4)(smp?)
+ isapnp ISA PnP (Plug&Play) Info (2.4)
+ kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
+ kmsg Kernel messages
+ ksyms Kernel symbol table
+ loadavg Load average of last 1, 5 & 15 minutes
+ locks Kernel locks
+ meminfo Memory info
+ misc Miscellaneous
+ modules List of loaded modules
+ mounts Mounted filesystems
+ net Networking info (see text)
+ pagetypeinfo Additional page allocator information (see text) (2.5)
+ partitions Table of partitions known to the system
+ pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
+ decoupled by lspci (2.4)
+ rtc Real time clock
+ scsi SCSI info (see text)
+ slabinfo Slab pool info
+ softirqs softirq usage
+ stat Overall statistics
+ swaps Swap space utilization
+ sys See chapter 2
+ sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
+ tty Info of tty drivers
+ uptime Wall clock since boot, combined idle time of all cpus
+ version Kernel version
+ video bttv info of video resources (2.4)
+ vmallocinfo Show vmalloced areas
+..............................................................................
+
+You can, for example, check which interrupts are currently in use and what
+they are used for by looking in the file /proc/interrupts:
+
+ > cat /proc/interrupts
+ CPU0
+ 0: 8728810 XT-PIC timer
+ 1: 895 XT-PIC keyboard
+ 2: 0 XT-PIC cascade
+ 3: 531695 XT-PIC aha152x
+ 4: 2014133 XT-PIC serial
+ 5: 44401 XT-PIC pcnet_cs
+ 8: 2 XT-PIC rtc
+ 11: 8 XT-PIC i82365
+ 12: 182918 XT-PIC PS/2 Mouse
+ 13: 1 XT-PIC fpu
+ 14: 1232265 XT-PIC ide0
+ 15: 7 XT-PIC ide1
+ NMI: 0
+
+In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
+output of a SMP machine):
+
+ > cat /proc/interrupts
+
+ CPU0 CPU1
+ 0: 1243498 1214548 IO-APIC-edge timer
+ 1: 8949 8958 IO-APIC-edge keyboard
+ 2: 0 0 XT-PIC cascade
+ 5: 11286 10161 IO-APIC-edge soundblaster
+ 8: 1 0 IO-APIC-edge rtc
+ 9: 27422 27407 IO-APIC-edge 3c503
+ 12: 113645 113873 IO-APIC-edge PS/2 Mouse
+ 13: 0 0 XT-PIC fpu
+ 14: 22491 24012 IO-APIC-edge ide0
+ 15: 2183 2415 IO-APIC-edge ide1
+ 17: 30564 30414 IO-APIC-level eth0
+ 18: 177 164 IO-APIC-level bttv
+ NMI: 2457961 2457959
+ LOC: 2457882 2457881
+ ERR: 2155
+
+NMI is incremented in this case because every timer interrupt generates a NMI
+(Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
+
+LOC is the local interrupt counter of the internal APIC of every CPU.
+
+ERR is incremented in the case of errors in the IO-APIC bus (the bus that
+connects the CPUs in a SMP system. This means that an error has been detected,
+the IO-APIC automatically retry the transmission, so it should not be a big
+problem, but you should read the SMP-FAQ.
+
+In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
+/proc/interrupts to display every IRQ vector in use by the system, not
+just those considered 'most important'. The new vectors are:
+
+ THR -- interrupt raised when a machine check threshold counter
+ (typically counting ECC corrected errors of memory or cache) exceeds
+ a configurable threshold. Only available on some systems.
+
+ TRM -- a thermal event interrupt occurs when a temperature threshold
+ has been exceeded for the CPU. This interrupt may also be generated
+ when the temperature drops back to normal.
+
+ SPU -- a spurious interrupt is some interrupt that was raised then lowered
+ by some IO device before it could be fully processed by the APIC. Hence
+ the APIC sees the interrupt but does not know what device it came from.
+ For this case the APIC will generate the interrupt with a IRQ vector
+ of 0xff. This might also be generated by chipset bugs.
+
+ RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
+ sent from one CPU to another per the needs of the OS. Typically,
+ their statistics are used by kernel developers and interested users to
+ determine the occurrence of interrupts of the given type.
+
+The above IRQ vectors are displayed only when relevant. For example,
+the threshold vector does not exist on x86_64 platforms. Others are
+suppressed when the system is a uniprocessor. As of this writing, only
+i386 and x86_64 platforms support the new IRQ vector displays.
+
+Of some interest is the introduction of the /proc/irq directory to 2.4.
+It could be used to set IRQ to CPU affinity, this means that you can "hook" an
+IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
+irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
+prof_cpu_mask.
+
+For example
+ > ls /proc/irq/
+ 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
+ 1 11 13 15 17 19 3 5 7 9 default_smp_affinity
+ > ls /proc/irq/0/
+ smp_affinity
+
+smp_affinity is a bitmask, in which you can specify which CPUs can handle the
+IRQ, you can set it by doing:
+
+ > echo 1 > /proc/irq/10/smp_affinity
+
+This means that only the first CPU will handle the IRQ, but you can also echo
+5 which means that only the first and fourth CPU can handle the IRQ.
+
+The contents of each smp_affinity file is the same by default:
+
+ > cat /proc/irq/0/smp_affinity
+ ffffffff
+
+There is an alternate interface, smp_affinity_list which allows specifying
+a cpu range instead of a bitmask:
+
+ > cat /proc/irq/0/smp_affinity_list
+ 1024-1031
+
+The default_smp_affinity mask applies to all non-active IRQs, which are the
+IRQs which have not yet been allocated/activated, and hence which lack a
+/proc/irq/[0-9]* directory.
+
+The node file on an SMP system shows the node to which the device using the IRQ
+reports itself as being attached. This hardware locality information does not
+include information about any possible driver locality preference.
+
+prof_cpu_mask specifies which CPUs are to be profiled by the system wide
+profiler. Default value is ffffffff (all cpus if there are only 32 of them).
+
+The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
+between all the CPUs which are allowed to handle it. As usual the kernel has
+more info than you and does a better job than you, so the defaults are the
+best choice for almost everyone. [Note this applies only to those IO-APIC's
+that support "Round Robin" interrupt distribution.]
+
+There are three more important subdirectories in /proc: net, scsi, and sys.
+The general rule is that the contents, or even the existence of these
+directories, depend on your kernel configuration. If SCSI is not enabled, the
+directory scsi may not exist. The same is true with the net, which is there
+only when networking support is present in the running kernel.
+
+The slabinfo file gives information about memory usage at the slab level.
+Linux uses slab pools for memory management above page level in version 2.2.
+Commonly used objects have their own slab pool (such as network buffers,
+directory cache, and so on).
+
+..............................................................................
+
+> cat /proc/buddyinfo
+
+Node 0, zone DMA 0 4 5 4 4 3 ...
+Node 0, zone Normal 1 0 0 1 101 8 ...
+Node 0, zone HighMem 2 0 0 1 1 0 ...
+
+External fragmentation is a problem under some workloads, and buddyinfo is a
+useful tool for helping diagnose these problems. Buddyinfo will give you a
+clue as to how big an area you can safely allocate, or why a previous
+allocation failed.
+
+Each column represents the number of pages of a certain order which are
+available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
+ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
+available in ZONE_NORMAL, etc...
+
+More information relevant to external fragmentation can be found in
+pagetypeinfo.
+
+> cat /proc/pagetypeinfo
+Page block order: 9
+Pages per block: 512
+
+Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
+Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
+Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
+Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
+Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
+Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
+Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
+Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
+Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
+Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
+Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
+
+Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
+Node 0, zone DMA 2 0 5 1 0
+Node 0, zone DMA32 41 6 967 2 0
+
+Fragmentation avoidance in the kernel works by grouping pages of different
+migrate types into the same contiguous regions of memory called page blocks.
+A page block is typically the size of the default hugepage size e.g. 2MB on
+X86-64. By keeping pages grouped based on their ability to move, the kernel
+can reclaim pages within a page block to satisfy a high-order allocation.
+
+The pagetypinfo begins with information on the size of a page block. It
+then gives the same type of information as buddyinfo except broken down
+by migrate-type and finishes with details on how many page blocks of each
+type exist.
+
+If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
+from libhugetlbfs http://sourceforge.net/projects/libhugetlbfs/), one can
+make an estimate of the likely number of huge pages that can be allocated
+at a given point in time. All the "Movable" blocks should be allocatable
+unless memory has been mlock()'d. Some of the Reclaimable blocks should
+also be allocatable although a lot of filesystem metadata may have to be
+reclaimed to achieve this.
+
+..............................................................................
+
+meminfo:
+
+Provides information about distribution and utilization of memory. This
+varies by architecture and compile options. The following is from a
+16GB PIII, which has highmem enabled. You may not have all of these fields.
+
+> cat /proc/meminfo
+
+The "Locked" indicates whether the mapping is locked in memory or not.
+
+
+MemTotal: 16344972 kB
+MemFree: 13634064 kB
+MemAvailable: 14836172 kB
+Buffers: 3656 kB
+Cached: 1195708 kB
+SwapCached: 0 kB
+Active: 891636 kB
+Inactive: 1077224 kB
+HighTotal: 15597528 kB
+HighFree: 13629632 kB
+LowTotal: 747444 kB
+LowFree: 4432 kB
+SwapTotal: 0 kB
+SwapFree: 0 kB
+Dirty: 968 kB
+Writeback: 0 kB
+AnonPages: 861800 kB
+Mapped: 280372 kB
+Slab: 284364 kB
+SReclaimable: 159856 kB
+SUnreclaim: 124508 kB
+PageTables: 24448 kB
+NFS_Unstable: 0 kB
+Bounce: 0 kB
+WritebackTmp: 0 kB
+CommitLimit: 7669796 kB
+Committed_AS: 100056 kB
+VmallocTotal: 112216 kB
+VmallocUsed: 428 kB
+VmallocChunk: 111088 kB
+AnonHugePages: 49152 kB
+
+ MemTotal: Total usable ram (i.e. physical ram minus a few reserved
+ bits and the kernel binary code)
+ MemFree: The sum of LowFree+HighFree
+MemAvailable: An estimate of how much memory is available for starting new
+ applications, without swapping. Calculated from MemFree,
+ SReclaimable, the size of the file LRU lists, and the low
+ watermarks in each zone.
+ The estimate takes into account that the system needs some
+ page cache to function well, and that not all reclaimable
+ slab will be reclaimable, due to items being in use. The
+ impact of those factors will vary from system to system.
+ Buffers: Relatively temporary storage for raw disk blocks
+ shouldn't get tremendously large (20MB or so)
+ Cached: in-memory cache for files read from the disk (the
+ pagecache). Doesn't include SwapCached
+ SwapCached: Memory that once was swapped out, is swapped back in but
+ still also is in the swapfile (if memory is needed it
+ doesn't need to be swapped out AGAIN because it is already
+ in the swapfile. This saves I/O)
+ Active: Memory that has been used more recently and usually not
+ reclaimed unless absolutely necessary.
+ Inactive: Memory which has been less recently used. It is more
+ eligible to be reclaimed for other purposes
+ HighTotal:
+ HighFree: Highmem is all memory above ~860MB of physical memory
+ Highmem areas are for use by userspace programs, or
+ for the pagecache. The kernel must use tricks to access
+ this memory, making it slower to access than lowmem.
+ LowTotal:
+ LowFree: Lowmem is memory which can be used for everything that
+ highmem can be used for, but it is also available for the
+ kernel's use for its own data structures. Among many
+ other things, it is where everything from the Slab is
+ allocated. Bad things happen when you're out of lowmem.
+ SwapTotal: total amount of swap space available
+ SwapFree: Memory which has been evicted from RAM, and is temporarily
+ on the disk
+ Dirty: Memory which is waiting to get written back to the disk
+ Writeback: Memory which is actively being written back to the disk
+ AnonPages: Non-file backed pages mapped into userspace page tables
+AnonHugePages: Non-file backed huge pages mapped into userspace page tables
+ Mapped: files which have been mmaped, such as libraries
+ Slab: in-kernel data structures cache
+SReclaimable: Part of Slab, that might be reclaimed, such as caches
+ SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
+ PageTables: amount of memory dedicated to the lowest level of page
+ tables.
+NFS_Unstable: NFS pages sent to the server, but not yet committed to stable
+ storage
+ Bounce: Memory used for block device "bounce buffers"
+WritebackTmp: Memory used by FUSE for temporary writeback buffers
+ CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
+ this is the total amount of memory currently available to
+ be allocated on the system. This limit is only adhered to
+ if strict overcommit accounting is enabled (mode 2 in
+ 'vm.overcommit_memory').
+ The CommitLimit is calculated with the following formula:
+ CommitLimit = ([total RAM pages] - [total huge TLB pages]) *
+ overcommit_ratio / 100 + [total swap pages]
+ For example, on a system with 1G of physical RAM and 7G
+ of swap with a `vm.overcommit_ratio` of 30 it would
+ yield a CommitLimit of 7.3G.
+ For more details, see the memory overcommit documentation
+ in vm/overcommit-accounting.
+Committed_AS: The amount of memory presently allocated on the system.
+ The committed memory is a sum of all of the memory which
+ has been allocated by processes, even if it has not been
+ "used" by them as of yet. A process which malloc()'s 1G
+ of memory, but only touches 300M of it will show up as
+ using 1G. This 1G is memory which has been "committed" to
+ by the VM and can be used at any time by the allocating
+ application. With strict overcommit enabled on the system
+ (mode 2 in 'vm.overcommit_memory'),allocations which would
+ exceed the CommitLimit (detailed above) will not be permitted.
+ This is useful if one needs to guarantee that processes will
+ not fail due to lack of memory once that memory has been
+ successfully allocated.
+VmallocTotal: total size of vmalloc memory area
+ VmallocUsed: amount of vmalloc area which is used
+VmallocChunk: largest contiguous block of vmalloc area which is free
+
+..............................................................................
+
+vmallocinfo:
+
+Provides information about vmalloced/vmaped areas. One line per area,
+containing the virtual address range of the area, size in bytes,
+caller information of the creator, and optional information depending
+on the kind of area :
+
+ pages=nr number of pages
+ phys=addr if a physical address was specified
+ ioremap I/O mapping (ioremap() and friends)
+ vmalloc vmalloc() area
+ vmap vmap()ed pages
+ user VM_USERMAP area
+ vpages buffer for pages pointers was vmalloced (huge area)
+ N<node>=nr (Only on NUMA kernels)
+ Number of pages allocated on memory node <node>
+
+> cat /proc/vmallocinfo
+0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
+ /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
+0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
+ /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
+0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
+ phys=7fee8000 ioremap
+0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
+ phys=7fee7000 ioremap
+0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
+0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
+ /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
+0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
+ pages=2 vmalloc N1=2
+0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
+ /0x130 [x_tables] pages=4 vmalloc N0=4
+0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
+ pages=14 vmalloc N2=14
+0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
+ pages=4 vmalloc N1=4
+0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
+ pages=2 vmalloc N1=2
+0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
+ pages=10 vmalloc N0=10
+
+..............................................................................
+
+softirqs:
+
+Provides counts of softirq handlers serviced since boot time, for each cpu.
+
+> cat /proc/softirqs
+ CPU0 CPU1 CPU2 CPU3
+ HI: 0 0 0 0
+ TIMER: 27166 27120 27097 27034
+ NET_TX: 0 0 0 17
+ NET_RX: 42 0 0 39
+ BLOCK: 0 0 107 1121
+ TASKLET: 0 0 0 290
+ SCHED: 27035 26983 26971 26746
+ HRTIMER: 0 0 0 0
+ RCU: 1678 1769 2178 2250
+
+
+1.3 IDE devices in /proc/ide
+----------------------------
+
+The subdirectory /proc/ide contains information about all IDE devices of which
+the kernel is aware. There is one subdirectory for each IDE controller, the
+file drivers and a link for each IDE device, pointing to the device directory
+in the controller specific subtree.
+
+The file drivers contains general information about the drivers used for the
+IDE devices:
+
+ > cat /proc/ide/drivers
+ ide-cdrom version 4.53
+ ide-disk version 1.08
+
+More detailed information can be found in the controller specific
+subdirectories. These are named ide0, ide1 and so on. Each of these
+directories contains the files shown in table 1-6.
+
+
+Table 1-6: IDE controller info in /proc/ide/ide?
+..............................................................................
+ File Content
+ channel IDE channel (0 or 1)
+ config Configuration (only for PCI/IDE bridge)
+ mate Mate name
+ model Type/Chipset of IDE controller
+..............................................................................
+
+Each device connected to a controller has a separate subdirectory in the
+controllers directory. The files listed in table 1-7 are contained in these
+directories.
+
+
+Table 1-7: IDE device information
+..............................................................................
+ File Content
+ cache The cache
+ capacity Capacity of the medium (in 512Byte blocks)
+ driver driver and version
+ geometry physical and logical geometry
+ identify device identify block
+ media media type
+ model device identifier
+ settings device setup
+ smart_thresholds IDE disk management thresholds
+ smart_values IDE disk management values
+..............................................................................
+
+The most interesting file is settings. This file contains a nice overview of
+the drive parameters:
+
+ # cat /proc/ide/ide0/hda/settings
+ name value min max mode
+ ---- ----- --- --- ----
+ bios_cyl 526 0 65535 rw
+ bios_head 255 0 255 rw
+ bios_sect 63 0 63 rw
+ breada_readahead 4 0 127 rw
+ bswap 0 0 1 r
+ file_readahead 72 0 2097151 rw
+ io_32bit 0 0 3 rw
+ keepsettings 0 0 1 rw
+ max_kb_per_request 122 1 127 rw
+ multcount 0 0 8 rw
+ nice1 1 0 1 rw
+ nowerr 0 0 1 rw
+ pio_mode write-only 0 255 w
+ slow 0 0 1 rw
+ unmaskirq 0 0 1 rw
+ using_dma 0 0 1 rw
+
+
+1.4 Networking info in /proc/net
+--------------------------------
+
+The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
+additional values you get for IP version 6 if you configure the kernel to
+support this. Table 1-9 lists the files and their meaning.
+
+
+Table 1-8: IPv6 info in /proc/net
+..............................................................................
+ File Content
+ udp6 UDP sockets (IPv6)
+ tcp6 TCP sockets (IPv6)
+ raw6 Raw device statistics (IPv6)
+ igmp6 IP multicast addresses, which this host joined (IPv6)
+ if_inet6 List of IPv6 interface addresses
+ ipv6_route Kernel routing table for IPv6
+ rt6_stats Global IPv6 routing tables statistics
+ sockstat6 Socket statistics (IPv6)
+ snmp6 Snmp data (IPv6)
+..............................................................................
+
+
+Table 1-9: Network info in /proc/net
+..............................................................................
+ File Content
+ arp Kernel ARP table
+ dev network devices with statistics
+ dev_mcast the Layer2 multicast groups a device is listening too
+ (interface index, label, number of references, number of bound
+ addresses).
+ dev_stat network device status
+ ip_fwchains Firewall chain linkage
+ ip_fwnames Firewall chain names
+ ip_masq Directory containing the masquerading tables
+ ip_masquerade Major masquerading table
+ netstat Network statistics
+ raw raw device statistics
+ route Kernel routing table
+ rpc Directory containing rpc info
+ rt_cache Routing cache
+ snmp SNMP data
+ sockstat Socket statistics
+ tcp TCP sockets
+ udp UDP sockets
+ unix UNIX domain sockets
+ wireless Wireless interface data (Wavelan etc)
+ igmp IP multicast addresses, which this host joined
+ psched Global packet scheduler parameters.
+ netlink List of PF_NETLINK sockets
+ ip_mr_vifs List of multicast virtual interfaces
+ ip_mr_cache List of multicast routing cache
+..............................................................................
+
+You can use this information to see which network devices are available in
+your system and how much traffic was routed over those devices:
+
+ > cat /proc/net/dev
+ Inter-|Receive |[...
+ face |bytes packets errs drop fifo frame compressed multicast|[...
+ lo: 908188 5596 0 0 0 0 0 0 [...
+ ppp0:15475140 20721 410 0 0 410 0 0 [...
+ eth0: 614530 7085 0 0 0 0 0 1 [...
+
+ ...] Transmit
+ ...] bytes packets errs drop fifo colls carrier compressed
+ ...] 908188 5596 0 0 0 0 0 0
+ ...] 1375103 17405 0 0 0 0 0 0
+ ...] 1703981 5535 0 0 0 3 0 0
+
+In addition, each Channel Bond interface has its own directory. For
+example, the bond0 device will have a directory called /proc/net/bond0/.
+It will contain information that is specific to that bond, such as the
+current slaves of the bond, the link status of the slaves, and how
+many times the slaves link has failed.
+
+1.5 SCSI info
+-------------
+
+If you have a SCSI host adapter in your system, you'll find a subdirectory
+named after the driver for this adapter in /proc/scsi. You'll also see a list
+of all recognized SCSI devices in /proc/scsi:
+
+ >cat /proc/scsi/scsi
+ Attached devices:
+ Host: scsi0 Channel: 00 Id: 00 Lun: 00
+ Vendor: IBM Model: DGHS09U Rev: 03E0
+ Type: Direct-Access ANSI SCSI revision: 03
+ Host: scsi0 Channel: 00 Id: 06 Lun: 00
+ Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
+ Type: CD-ROM ANSI SCSI revision: 02
+
+
+The directory named after the driver has one file for each adapter found in
+the system. These files contain information about the controller, including
+the used IRQ and the IO address range. The amount of information shown is
+dependent on the adapter you use. The example shows the output for an Adaptec
+AHA-2940 SCSI adapter:
+
+ > cat /proc/scsi/aic7xxx/0
+
+ Adaptec AIC7xxx driver version: 5.1.19/3.2.4
+ Compile Options:
+ TCQ Enabled By Default : Disabled
+ AIC7XXX_PROC_STATS : Disabled
+ AIC7XXX_RESET_DELAY : 5
+ Adapter Configuration:
+ SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
+ Ultra Wide Controller
+ PCI MMAPed I/O Base: 0xeb001000
+ Adapter SEEPROM Config: SEEPROM found and used.
+ Adaptec SCSI BIOS: Enabled
+ IRQ: 10
+ SCBs: Active 0, Max Active 2,
+ Allocated 15, HW 16, Page 255
+ Interrupts: 160328
+ BIOS Control Word: 0x18b6
+ Adapter Control Word: 0x005b
+ Extended Translation: Enabled
+ Disconnect Enable Flags: 0xffff
+ Ultra Enable Flags: 0x0001
+ Tag Queue Enable Flags: 0x0000
+ Ordered Queue Tag Flags: 0x0000
+ Default Tag Queue Depth: 8
+ Tagged Queue By Device array for aic7xxx host instance 0:
+ {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
+ Actual queue depth per device for aic7xxx host instance 0:
+ {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
+ Statistics:
+ (scsi0:0:0:0)
+ Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
+ Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
+ Total transfers 160151 (74577 reads and 85574 writes)
+ (scsi0:0:6:0)
+ Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
+ Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
+ Total transfers 0 (0 reads and 0 writes)
+
+
+1.6 Parallel port info in /proc/parport
+---------------------------------------
+
+The directory /proc/parport contains information about the parallel ports of
+your system. It has one subdirectory for each port, named after the port
+number (0,1,2,...).
+
+These directories contain the four files shown in Table 1-10.
+
+
+Table 1-10: Files in /proc/parport
+..............................................................................
+ File Content
+ autoprobe Any IEEE-1284 device ID information that has been acquired.
+ devices list of the device drivers using that port. A + will appear by the
+ name of the device currently using the port (it might not appear
+ against any).
+ hardware Parallel port's base address, IRQ line and DMA channel.
+ irq IRQ that parport is using for that port. This is in a separate
+ file to allow you to alter it by writing a new value in (IRQ
+ number or none).
+..............................................................................
+
+1.7 TTY info in /proc/tty
+-------------------------
+
+Information about the available and actually used tty's can be found in the
+directory /proc/tty.You'll find entries for drivers and line disciplines in
+this directory, as shown in Table 1-11.
+
+
+Table 1-11: Files in /proc/tty
+..............................................................................
+ File Content
+ drivers list of drivers and their usage
+ ldiscs registered line disciplines
+ driver/serial usage statistic and status of single tty lines
+..............................................................................
+
+To see which tty's are currently in use, you can simply look into the file
+/proc/tty/drivers:
+
+ > cat /proc/tty/drivers
+ pty_slave /dev/pts 136 0-255 pty:slave
+ pty_master /dev/ptm 128 0-255 pty:master
+ pty_slave /dev/ttyp 3 0-255 pty:slave
+ pty_master /dev/pty 2 0-255 pty:master
+ serial /dev/cua 5 64-67 serial:callout
+ serial /dev/ttyS 4 64-67 serial
+ /dev/tty0 /dev/tty0 4 0 system:vtmaster
+ /dev/ptmx /dev/ptmx 5 2 system
+ /dev/console /dev/console 5 1 system:console
+ /dev/tty /dev/tty 5 0 system:/dev/tty
+ unknown /dev/tty 4 1-63 console
+
+
+1.8 Miscellaneous kernel statistics in /proc/stat
+-------------------------------------------------
+
+Various pieces of information about kernel activity are available in the
+/proc/stat file. All of the numbers reported in this file are aggregates
+since the system first booted. For a quick look, simply cat the file:
+
+ > cat /proc/stat
+ cpu 2255 34 2290 22625563 6290 127 456 0 0 0
+ cpu0 1132 34 1441 11311718 3675 127 438 0 0 0
+ cpu1 1123 0 849 11313845 2614 0 18 0 0 0
+ intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
+ ctxt 1990473
+ btime 1062191376
+ processes 2915
+ procs_running 1
+ procs_blocked 0
+ softirq 183433 0 21755 12 39 1137 231 21459 2263
+
+The very first "cpu" line aggregates the numbers in all of the other "cpuN"
+lines. These numbers identify the amount of time the CPU has spent performing
+different kinds of work. Time units are in USER_HZ (typically hundredths of a
+second). The meanings of the columns are as follows, from left to right:
+
+- user: normal processes executing in user mode
+- nice: niced processes executing in user mode
+- system: processes executing in kernel mode
+- idle: twiddling thumbs
+- iowait: waiting for I/O to complete
+- irq: servicing interrupts
+- softirq: servicing softirqs
+- steal: involuntary wait
+- guest: running a normal guest
+- guest_nice: running a niced guest
+
+The "intr" line gives counts of interrupts serviced since boot time, for each
+of the possible system interrupts. The first column is the total of all
+interrupts serviced including unnumbered architecture specific interrupts;
+each subsequent column is the total for that particular numbered interrupt.
+Unnumbered interrupts are not shown, only summed into the total.
+
+The "ctxt" line gives the total number of context switches across all CPUs.
+
+The "btime" line gives the time at which the system booted, in seconds since
+the Unix epoch.
+
+The "processes" line gives the number of processes and threads created, which
+includes (but is not limited to) those created by calls to the fork() and
+clone() system calls.
+
+The "procs_running" line gives the total number of threads that are
+running or ready to run (i.e., the total number of runnable threads).
+
+The "procs_blocked" line gives the number of processes currently blocked,
+waiting for I/O to complete.
+
+The "softirq" line gives counts of softirqs serviced since boot time, for each
+of the possible system softirqs. The first column is the total of all
+softirqs serviced; each subsequent column is the total for that particular
+softirq.
+
+
+1.9 Ext4 file system parameters
+-------------------------------
+
+Information about mounted ext4 file systems can be found in
+/proc/fs/ext4. Each mounted filesystem will have a directory in
+/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
+/proc/fs/ext4/dm-0). The files in each per-device directory are shown
+in Table 1-12, below.
+
+Table 1-12: Files in /proc/fs/ext4/<devname>
+..............................................................................
+ File Content
+ mb_groups details of multiblock allocator buddy cache of free blocks
+..............................................................................
+
+2.0 /proc/consoles
+------------------
+Shows registered system console lines.
+
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/consoles:
+
+ > cat /proc/consoles
+ tty0 -WU (ECp) 4:7
+ ttyS0 -W- (Ep) 4:64
+
+The columns are:
+
+ device name of the device
+ operations R = can do read operations
+ W = can do write operations
+ U = can do unblank
+ flags E = it is enabled
+ C = it is preferred console
+ B = it is primary boot console
+ p = it is used for printk buffer
+ b = it is not a TTY but a Braille device
+ a = it is safe to use when cpu is offline
+ major:minor major and minor number of the device separated by a colon
+
+------------------------------------------------------------------------------
+Summary
+------------------------------------------------------------------------------
+The /proc file system serves information about the running system. It not only
+allows access to process data but also allows you to request the kernel status
+by reading files in the hierarchy.
+
+The directory structure of /proc reflects the types of information and makes
+it easy, if not obvious, where to look for specific data.
+------------------------------------------------------------------------------
+
+------------------------------------------------------------------------------
+CHAPTER 2: MODIFYING SYSTEM PARAMETERS
+------------------------------------------------------------------------------
+
+------------------------------------------------------------------------------
+In This Chapter
+------------------------------------------------------------------------------
+* Modifying kernel parameters by writing into files found in /proc/sys
+* Exploring the files which modify certain parameters
+* Review of the /proc/sys file tree
+------------------------------------------------------------------------------
+
+
+A very interesting part of /proc is the directory /proc/sys. This is not only
+a source of information, it also allows you to change parameters within the
+kernel. Be very careful when attempting this. You can optimize your system,
+but you can also cause it to crash. Never alter kernel parameters on a
+production system. Set up a development machine and test to make sure that
+everything works the way you want it to. You may have no alternative but to
+reboot the machine once an error has been made.
+
+To change a value, simply echo the new value into the file. An example is
+given below in the section on the file system data. You need to be root to do
+this. You can create your own boot script to perform this every time your
+system boots.
+
+The files in /proc/sys can be used to fine tune and monitor miscellaneous and
+general things in the operation of the Linux kernel. Since some of the files
+can inadvertently disrupt your system, it is advisable to read both
+documentation and source before actually making adjustments. In any case, be
+very careful when writing to any of these files. The entries in /proc may
+change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
+review the kernel documentation in the directory /usr/src/linux/Documentation.
+This chapter is heavily based on the documentation included in the pre 2.2
+kernels, and became part of it in version 2.2.1 of the Linux kernel.
+
+Please see: Documentation/sysctl/ directory for descriptions of these
+entries.
+
+------------------------------------------------------------------------------
+Summary
+------------------------------------------------------------------------------
+Certain aspects of kernel behavior can be modified at runtime, without the
+need to recompile the kernel, or even to reboot the system. The files in the
+/proc/sys tree can not only be read, but also modified. You can use the echo
+command to write value into these files, thereby changing the default settings
+of the kernel.
+------------------------------------------------------------------------------
+
+------------------------------------------------------------------------------
+CHAPTER 3: PER-PROCESS PARAMETERS
+------------------------------------------------------------------------------
+
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+--------------------------------------------------------------------------------
+
+These file can be used to adjust the badness heuristic used to select which
+process gets killed in out of memory conditions.
+
+The badness heuristic assigns a value to each candidate task ranging from 0
+(never kill) to 1000 (always kill) to determine which process is targeted. The
+units are roughly a proportion along that range of allowed memory the process
+may allocate from based on an estimation of its current memory and swap use.
+For example, if a task is using all allowed memory, its badness score will be
+1000. If it is using half of its allowed memory, its score will be 500.
+
+There is an additional factor included in the badness score: the current memory
+and swap usage is discounted by 3% for root processes.
+
+The amount of "allowed" memory depends on the context in which the oom killer
+was called. If it is due to the memory assigned to the allocating task's cpuset
+being exhausted, the allowed memory represents the set of mems assigned to that
+cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
+memory represents the set of mempolicy nodes. If it is due to a memory
+limit (or swap limit) being reached, the allowed memory is that configured
+limit. Finally, if it is due to the entire system being out of memory, the
+allowed memory represents all allocatable resources.
+
+The value of /proc/<pid>/oom_score_adj is added to the badness score before it
+is used to determine which task to kill. Acceptable values range from -1000
+(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
+polarize the preference for oom killing either by always preferring a certain
+task or completely disabling it. The lowest possible value, -1000, is
+equivalent to disabling oom killing entirely for that task since it will always
+report a badness score of 0.
+
+Consequently, it is very simple for userspace to define the amount of memory to
+consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
+example, is roughly equivalent to allowing the remainder of tasks sharing the
+same system, cpuset, mempolicy, or memory controller resources to use at least
+50% more memory. A value of -500, on the other hand, would be roughly
+equivalent to discounting 50% of the task's allowed memory from being considered
+as scoring against the task.
+
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score. Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task. Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
+The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
+value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
+requires CAP_SYS_RESOURCE.
+
+Caveat: when a parent task is selected, the oom killer will sacrifice any first
+generation children with separate address spaces instead, if possible. This
+avoids servers and important system daemons from being killed and loses the
+minimal amount of work.
+
+
+3.2 /proc/<pid>/oom_score - Display current oom-killer score
+-------------------------------------------------------------
+
+This file can be used to check the current score used by the oom-killer is for
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
+
+3.3 /proc/<pid>/io - Display the IO accounting fields
+-------------------------------------------------------
+
+This file contains IO statistics for each running process
+
+Example
+-------
+
+test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
+[1] 3828
+
+test:/tmp # cat /proc/3828/io
+rchar: 323934931
+wchar: 323929600
+syscr: 632687
+syscw: 632675
+read_bytes: 0
+write_bytes: 323932160
+cancelled_write_bytes: 0
+
+
+Description
+-----------
+
+rchar
+-----
+
+I/O counter: chars read
+The number of bytes which this task has caused to be read from storage. This
+is simply the sum of bytes which this process passed to read() and pread().
+It includes things like tty IO and it is unaffected by whether or not actual
+physical disk IO was required (the read might have been satisfied from
+pagecache)
+
+
+wchar
+-----
+
+I/O counter: chars written
+The number of bytes which this task has caused, or shall cause to be written
+to disk. Similar caveats apply here as with rchar.
+
+
+syscr
+-----
+
+I/O counter: read syscalls
+Attempt to count the number of read I/O operations, i.e. syscalls like read()
+and pread().
+
+
+syscw
+-----
+
+I/O counter: write syscalls
+Attempt to count the number of write I/O operations, i.e. syscalls like
+write() and pwrite().
+
+
+read_bytes
+----------
+
+I/O counter: bytes read
+Attempt to count the number of bytes which this process really did cause to
+be fetched from the storage layer. Done at the submit_bio() level, so it is
+accurate for block-backed filesystems. <please add status regarding NFS and
+CIFS at a later time>
+
+
+write_bytes
+-----------
+
+I/O counter: bytes written
+Attempt to count the number of bytes which this process caused to be sent to
+the storage layer. This is done at page-dirtying time.
+
+
+cancelled_write_bytes
+---------------------
+
+The big inaccuracy here is truncate. If a process writes 1MB to a file and
+then deletes the file, it will in fact perform no writeout. But it will have
+been accounted as having caused 1MB of write.
+In other words: The number of bytes which this process caused to not happen,
+by truncating pagecache. A task can cause "negative" IO too. If this task
+truncates some dirty pagecache, some IO which another task has been accounted
+for (in its write_bytes) will not be happening. We _could_ just subtract that
+from the truncating task's write_bytes, but there is information loss in doing
+that.
+
+
+Note
+----
+
+At its current implementation state, this is a bit racy on 32-bit machines: if
+process A reads process B's /proc/pid/io while process B is updating one of
+those 64-bit counters, process A could see an intermediate result.
+
+
+More information about this can be found within the taskstats documentation in
+Documentation/accounting.
+
+3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
+---------------------------------------------------------------
+When a process is dumped, all anonymous memory is written to a core file as
+long as the size of the core file isn't limited. But sometimes we don't want
+to dump some memory segments, for example, huge shared memory. Conversely,
+sometimes we want to save file-backed memory segments into a core file, not
+only the individual files.
+
+/proc/<pid>/coredump_filter allows you to customize which memory segments
+will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
+of memory types. If a bit of the bitmask is set, memory segments of the
+corresponding memory type are dumped, otherwise they are not dumped.
+
+The following 7 memory types are supported:
+ - (bit 0) anonymous private memory
+ - (bit 1) anonymous shared memory
+ - (bit 2) file-backed private memory
+ - (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
+ - (bit 5) hugetlb private memory
+ - (bit 6) hugetlb shared memory
+
+ Note that MMIO pages such as frame buffer are never dumped and vDSO pages
+ are always dumped regardless of the bitmask status.
+
+ Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only
+ effected by bit 5-6.
+
+Default value of coredump_filter is 0x23; this means all anonymous memory
+segments and hugetlb private memory are dumped.
+
+If you don't want to dump all shared memory segments attached to pid 1234,
+write 0x21 to the process's proc file.
+
+ $ echo 0x21 > /proc/1234/coredump_filter
+
+When a new process is created, the process inherits the bitmask status from its
+parent. It is useful to set up coredump_filter before the program runs.
+For example:
+
+ $ echo 0x7 > /proc/self/coredump_filter
+ $ ./some_program
+
+3.5 /proc/<pid>/mountinfo - Information about mounts
+--------------------------------------------------------
+
+This file contains lines of the form:
+
+36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
+(1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11)
+
+(1) mount ID: unique identifier of the mount (may be reused after umount)
+(2) parent ID: ID of parent (or of self for the top of the mount tree)
+(3) major:minor: value of st_dev for files on filesystem
+(4) root: root of the mount within the filesystem
+(5) mount point: mount point relative to the process's root
+(6) mount options: per mount options
+(7) optional fields: zero or more fields of the form "tag[:value]"
+(8) separator: marks the end of the optional fields
+(9) filesystem type: name of filesystem of the form "type[.subtype]"
+(10) mount source: filesystem specific information or "none"
+(11) super options: per super block options
+
+Parsers should ignore all unrecognised optional fields. Currently the
+possible optional fields are:
+
+shared:X mount is shared in peer group X
+master:X mount is slave to peer group X
+propagate_from:X mount is slave and receives propagation from peer group X (*)
+unbindable mount is unbindable
+
+(*) X is the closest dominant peer group under the process's root. If
+X is the immediate master of the mount, or if there's no dominant peer
+group under the same root, then only the "master:X" field is present
+and not the "propagate_from:X" field.
+
+For more information on mount propagation see:
+
+ Documentation/filesystems/sharedsubtree.txt
+
+
+3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
+--------------------------------------------------------
+These files provide a method to access a tasks comm value. It also allows for
+a task to set its own or one of its thread siblings comm value. The comm value
+is limited in size compared to the cmdline value, so writing anything longer
+then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
+comm value.
+
+
+3.7 /proc/<pid>/task/<tid>/children - Information about task children
+-------------------------------------------------------------------------
+This file provides a fast way to retrieve first level children pids
+of a task pointed by <pid>/<tid> pair. The format is a space separated
+stream of pids.
+
+Note the "first level" here -- if a child has own children they will
+not be listed here, one needs to read /proc/<children-pid>/task/<tid>/children
+to obtain the descendants.
+
+Since this interface is intended to be fast and cheap it doesn't
+guarantee to provide precise results and some children might be
+skipped, especially if they've exited right after we printed their
+pids, so one need to either stop or freeze processes being inspected
+if precise results are needed.
+
+
+3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
+---------------------------------------------------------------
+This file provides information associated with an opened file. The regular
+files have at least three fields -- 'pos', 'flags' and mnt_id. The 'pos'
+represents the current offset of the opened file in decimal form [see lseek(2)
+for details], 'flags' denotes the octal O_xxx mask the file has been
+created with [see open(2) for details] and 'mnt_id' represents mount ID of
+the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
+for details].
+
+A typical output is
+
+ pos: 0
+ flags: 0100002
+ mnt_id: 19
+
+All locks associated with a file descriptor are shown in its fdinfo too.
+
+lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF
+
+The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
+pair provide additional information particular to the objects they represent.
+
+ Eventfd files
+ ~~~~~~~~~~~~~
+ pos: 0
+ flags: 04002
+ mnt_id: 9
+ eventfd-count: 5a
+
+ where 'eventfd-count' is hex value of a counter.
+
+ Signalfd files
+ ~~~~~~~~~~~~~~
+ pos: 0
+ flags: 04002
+ mnt_id: 9
+ sigmask: 0000000000000200
+
+ where 'sigmask' is hex value of the signal mask associated
+ with a file.
+
+ Epoll files
+ ~~~~~~~~~~~
+ pos: 0
+ flags: 02
+ mnt_id: 9
+ tfd: 5 events: 1d data: ffffffffffffffff
+
+ where 'tfd' is a target file descriptor number in decimal form,
+ 'events' is events mask being watched and the 'data' is data
+ associated with a target [see epoll(7) for more details].
+
+ Fsnotify files
+ ~~~~~~~~~~~~~~
+ For inotify files the format is the following
+
+ pos: 0
+ flags: 02000000
+ inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
+
+ where 'wd' is a watch descriptor in decimal form, ie a target file
+ descriptor number, 'ino' and 'sdev' are inode and device where the
+ target file resides and the 'mask' is the mask of events, all in hex
+ form [see inotify(7) for more details].
+
+ If the kernel was built with exportfs support, the path to the target
+ file is encoded as a file handle. The file handle is provided by three
+ fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex
+ format.
+
+ If the kernel is built without exportfs support the file handle won't be
+ printed out.
+
+ If there is no inotify mark attached yet the 'inotify' line will be omitted.
+
+ For fanotify files the format is
+
+ pos: 0
+ flags: 02
+ mnt_id: 9
+ fanotify flags:10 event-flags:0
+ fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
+ fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
+
+ where fanotify 'flags' and 'event-flags' are values used in fanotify_init
+ call, 'mnt_id' is the mount point identifier, 'mflags' is the value of
+ flags associated with mark which are tracked separately from events
+ mask. 'ino', 'sdev' are target inode and device, 'mask' is the events
+ mask and 'ignored_mask' is the mask of events which are to be ignored.
+ All in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask'
+ does provide information about flags and mask used in fanotify_mark
+ call [see fsnotify manpage for details].
+
+ While the first three lines are mandatory and always printed, the rest is
+ optional and may be omitted if no marks created yet.
+
+ Timerfd files
+ ~~~~~~~~~~~~~
+
+ pos: 0
+ flags: 02
+ mnt_id: 9
+ clockid: 0
+ ticks: 0
+ settime flags: 01
+ it_value: (0, 49406829)
+ it_interval: (1, 0)
+
+ where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
+ that have occurred [see timerfd_create(2) for details]. 'settime flags' are
+ flags in octal form been used to setup the timer [see timerfd_settime(2) for
+ details]. 'it_value' is remaining time until the timer exiration.
+ 'it_interval' is the interval for the timer. Note the timer might be set up
+ with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
+ still exhibits timer's remaining time.
+
+3.9 /proc/<pid>/map_files - Information about memory mapped files
+---------------------------------------------------------------------
+This directory contains symbolic links which represent memory mapped files
+the process is maintaining. Example output:
+
+ | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
+ | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
+ | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
+ | ...
+ | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
+ | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
+
+The name of a link represents the virtual memory bounds of a mapping, i.e.
+vm_area_struct::vm_start-vm_area_struct::vm_end.
+
+The main purpose of the map_files is to retrieve a set of memory mapped
+files in a fast way instead of parsing /proc/<pid>/maps or
+/proc/<pid>/smaps, both of which contain many more records. At the same
+time one can open(2) mappings from the listings of two processes and
+comparing their inode numbers to figure out which anonymous memory areas
+are actually shared.
+
+------------------------------------------------------------------------------
+Configuring procfs
+------------------------------------------------------------------------------
+
+4.1 Mount options
+---------------------
+
+The following mount options are supported:
+
+ hidepid= Set /proc/<pid>/ access mode.
+ gid= Set the group authorized to learn processes information.
+
+hidepid=0 means classic mode - everybody may access all /proc/<pid>/ directories
+(default).
+
+hidepid=1 means users may not access any /proc/<pid>/ directories but their
+own. Sensitive files like cmdline, sched*, status are now protected against
+other users. This makes it impossible to learn whether any user runs
+specific program (given the program doesn't reveal itself by its behaviour).
+As an additional bonus, as /proc/<pid>/cmdline is unaccessible for other users,
+poorly written programs passing sensitive information via program arguments are
+now protected against local eavesdroppers.
+
+hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be fully invisible to other
+users. It doesn't mean that it hides a fact whether a process with a specific
+pid value exists (it can be learned by other means, e.g. by "kill -0 $PID"),
+but it hides process' uid and gid, which may be learned by stat()'ing
+/proc/<pid>/ otherwise. It greatly complicates an intruder's task of gathering
+information about running processes, whether some daemon runs with elevated
+privileges, whether other user runs some sensitive program, whether other users
+run any program at all, etc.
+
+gid= defines a group authorized to learn processes information otherwise
+prohibited by hidepid=. If you use some daemon like identd which needs to learn
+information about processes information, just add identd to this group.
Code Review / kvmfornfv.git / blobdiff