Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / usb / ci-hdrc-imx.txt

diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
new file mode 100644 (file)
index 0000000..38a5480
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -0,0 +1,35 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+- fsl,usbphy: phandle of usb phy that connects to the port
+
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Optional properties:
+- fsl,usbmisc: phandler of non-core register device, with one argument
+  that indicate usb controller index
+- vbus-supply: regulator for vbus
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+- maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
+
+Examples:
+usb@02184000 { /* USB OTG */
+       compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+       reg = <0x02184000 0x200>;
+       interrupts = <0 43 0x04>;
+       fsl,usbphy = <&usbphy1>;
+       fsl,usbmisc = <&usbmisc 0>;
+       disable-over-current;
+       external-vbus-divider;
+       maximum-speed = "full-speed";
+       tpl-support;
+};