These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / sound / st,sti-asoc-card.txt
diff --git a/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
new file mode 100644 (file)
index 0000000..028fa1c
--- /dev/null
@@ -0,0 +1,155 @@
+STMicroelectronics sti ASoC cards
+
+The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
+codec or external codecs.
+
+sti sound drivers allows to expose sti SoC audio interface through the
+generic ASoC simple card. For details about sound card declaration please refer to
+Documentation/devicetree/bindings/sound/simple-card.txt.
+
+1) sti-uniperiph-dai: audio dai device.
+---------------------------------------
+
+Required properties:
+  - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
+
+  - st,syscfg: phandle to boot-device system configuration registers
+
+  - clock-names: name of the clocks listed in clocks property in the same order
+
+  - reg: CPU DAI IP Base address and size entries, listed  in same
+        order than the CPU_DAI properties.
+
+  - reg-names: names of the mapped memory regions listed in regs property in
+              the same order.
+
+  - interrupts: CPU_DAI interrupt line, listed in the same order than the
+               CPU_DAI properties.
+
+  - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
+        order than the CPU_DAI properties.
+
+  - dma-names: identifier string for each DMA request line in the dmas property.
+       "tx" for "st,sti-uni-player" compatibility
+       "rx" for "st,sti-uni-reader" compatibility
+
+  - version: IP version integrated in SOC.
+
+  - dai-name: DAI name that describes the IP.
+
+Required properties ("st,sti-uni-player" compatibility only):
+  - clocks: CPU_DAI IP clock source, listed in the same order than the
+           CPU_DAI properties.
+
+  - uniperiph-id: internal SOC IP instance ID.
+
+  - IP mode: IP working mode depending on associated codec.
+       "HDMI" connected to HDMI codec IP and IEC HDMI formats.
+       "SPDIF"connected to SPDIF codec and support SPDIF formats.
+       "PCM"  PCM standard mode for I2S or TDM bus.
+
+Optional properties:
+  - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
+              external codecs connection.
+
+  - pinctrl-names: should contain only one value - "default".
+
+Example:
+
+       sti_uni_player2: sti-uni-player@2 {
+               compatible = "st,sti-uni-player";
+               status = "okay";
+               #sound-dai-cells = <0>;
+               st,syscfg = <&syscfg_core>;
+               clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+               reg = <0x8D82000 0x158>;
+               interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+               dmas = <&fdma0 4 0 1>;
+               dai-name = "Uni Player #1 (DAC)";
+               dma-names = "tx";
+               uniperiph-id = <2>;
+               version = <5>;
+               mode = "PCM";
+       };
+
+       sti_uni_player3: sti-uni-player@3 {
+               compatible = "st,sti-uni-player";
+               status = "okay";
+               #sound-dai-cells = <0>;
+               st,syscfg = <&syscfg_core>;
+               clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+               reg = <0x8D85000 0x158>;
+               interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+               dmas = <&fdma0 7 0 1>;
+               dma-names = "tx";
+               dai-name = "Uni Player #1 (PIO)";
+               uniperiph-id = <3>;
+               version = <5>;
+               mode = "SPDIF";
+       };
+
+       sti_uni_reader1: sti-uni-reader@1 {
+               compatible = "st,sti-uni-reader";
+               status = "disabled";
+               #sound-dai-cells = <0>;
+               st,syscfg = <&syscfg_core>;
+               reg = <0x8D84000 0x158>;
+               interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+               dmas = <&fdma0 6 0 1>;
+               dma-names = "rx";
+               dai-name = "Uni Reader #1 (HDMI RX)";
+               version = <3>;
+       };
+
+2) sti-sas-codec: internal audio codec IPs driver
+-------------------------------------------------
+
+Required properties:
+  - compatible: "st,sti<chip>-sas-codec" .
+       Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec"
+
+  - st,syscfg: phandle to boot-device system configuration registers.
+
+  - pinctrl-0: SPDIF PIO description.
+
+  - pinctrl-names: should contain only one value - "default".
+
+Example:
+       sti_sas_codec: sti-sas-codec {
+               compatible = "st,stih407-sas-codec";
+               #sound-dai-cells = <1>;
+               st,reg_audio = <&syscfg_core>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_spdif_out >;
+       };
+
+Example of audio card declaration:
+       sound {
+               compatible = "simple-audio-card";
+               simple-audio-card,name = "sti audio card";
+               status = "okay";
+
+               simple-audio-card,dai-link@0 {
+                       /* DAC */
+                       format = "i2s";
+                       dai-tdm-slot-width = <32>;
+                       cpu {
+                               sound-dai = <&sti_uni_player2>;
+                       };
+
+                       codec {
+                               sound-dai = <&sti_sasg_codec 1>;
+                       };
+               };
+               simple-audio-card,dai-link@1 {
+                       /* SPDIF */
+                       format = "left_j";
+                       cpu {
+                               sound-dai = <&sti_uni_player3>;
+                       };
+
+                       codec {
+                               sound-dai = <&sti_sasg_codec 0>;
+                       };
+               };
+       };