Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / sound / imx-audio-wm8962.txt

diff --git a/kernel/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt b/kernel/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt
new file mode 100644 (file)
index 0000000..acea71b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt
@@ -0,0 +1,53 @@
+Freescale i.MX audio complex with WM8962 codec
+
+Required properties:
+
+  - compatible         : "fsl,imx-audio-wm8962"
+
+  - model              : The user-visible name of this sound complex
+
+  - ssi-controller     : The phandle of the i.MX SSI controller
+
+  - audio-codec                : The phandle of the WM8962 audio codec
+
+  - audio-routing      : A list of the connections between audio components.
+                         Each entry is a pair of strings, the first being the
+                         connection's sink, the second being the connection's
+                         source. Valid names could be power supplies, WM8962
+                         pins, and the jacks on the board:
+
+                         Power supplies:
+                          * Mic Bias
+
+                         Board connectors:
+                          * Mic Jack
+                          * Headphone Jack
+                          * Ext Spk
+
+  - mux-int-port       : The internal port of the i.MX audio muxer (AUDMUX)
+
+  - mux-ext-port       : The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+       compatible = "fsl,imx6q-sabresd-wm8962",
+                    "fsl,imx-audio-wm8962";
+       model = "wm8962-audio";
+       ssi-controller = <&ssi2>;
+       audio-codec = <&codec>;
+               audio-routing =
+               "Headphone Jack", "HPOUTL",
+               "Headphone Jack", "HPOUTR",
+               "Ext Spk", "SPKOUTL",
+               "Ext Spk", "SPKOUTR",
+               "MICBIAS", "AMIC",
+               "IN3R", "MICBIAS",
+               "DMIC", "MICBIAS",
+               "DMICDAT", "DMIC";
+       mux-int-port = <2>;
+       mux-ext-port = <3>;
+};