Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / sound / cs4265.txt

diff --git a/kernel/Documentation/devicetree/bindings/sound/cs4265.txt b/kernel/Documentation/devicetree/bindings/sound/cs4265.txt
new file mode 100644 (file)
index 0000000..380fff8
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/sound/cs4265.txt
@@ -0,0 +1,29 @@
+CS4265 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "cirrus,cs4265"
+
+  - reg : the I2C address of the device for I2C. The I2C address depends on
+          the state of the AD0 pin.  If AD0 is high, the i2c address is 0x4f.
+          If it is low, the i2c address is 0x4e.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+                deasserted before communication to the codec starts.
+
+Examples:
+
+codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
+       compatible = "cirrus,cs4265";
+       reg = <0x4f>;
+};
+
+
+codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
+       compatible = "cirrus,cs4265";
+       reg = <0x4e>;
+};