Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / serial / maxim,max310x.txt

diff --git a/kernel/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/kernel/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644 (file)
index 0000000..83a919c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,36 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+       max14830: max14830@0 {
+               compatible = "maxim,max14830";
+               reg = <0>;
+               clocks = <&clk20m>;
+               clock-names = "osc";
+               interrupt-parent = <&gpio3>;
+               interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };