Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / regulator / tps65090.txt
diff --git a/kernel/Documentation/devicetree/bindings/regulator/tps65090.txt b/kernel/Documentation/devicetree/bindings/regulator/tps65090.txt
new file mode 100644 (file)
index 0000000..ca69f5e
--- /dev/null
@@ -0,0 +1,126 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled and if it is from GPIO then GPIO
+  number should be provided. If it is externally controlled and no GPIO
+  entry then driver will just configure this rails as external control
+  and will not provide any enable/disable APIs.
+- ti,overcurrent-wait: This is applicable to FET registers, which have a
+  poorly defined "overcurrent wait" field.  If this property is present it
+  should be between 0 - 3.  If this property isn't present we won't touch the
+  "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+       tps65090@48 {
+               compatible = "ti,tps65090";
+               reg = <0x48>;
+               interrupts = <0 88 0x4>;
+
+               vsys1-supply = <&some_reg>;
+               vsys2-supply = <&some_reg>;
+               vsys3-supply = <&some_reg>;
+               infet1-supply = <&some_reg>;
+               infet2-supply = <&some_reg>;
+               infet3-supply = <&some_reg>;
+               infet4-supply = <&some_reg>;
+               infet5-supply = <&some_reg>;
+               infet6-supply = <&some_reg>;
+               infet7-supply = <&some_reg>;
+               vsys-l1-supply = <&some_reg>;
+               vsys-l2-supply = <&some_reg>;
+
+               regulators {
+                       dcdc1 {
+                               regulator-name = "dcdc1";
+                               regulator-boot-on;
+                               regulator-always-on;
+                               ti,enable-ext-control;
+                               dcdc-ext-control-gpios = <&gpio 10 0>;
+                       };
+
+                       dcdc2 {
+                               regulator-name = "dcdc2";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       dcdc3 {
+                               regulator-name = "dcdc3";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet1 {
+                               regulator-name = "fet1";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet2 {
+                               regulator-name = "fet2";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet3 {
+                               regulator-name = "fet3";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet4 {
+                               regulator-name = "fet4";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet5 {
+                               regulator-name = "fet5";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet6 {
+                               regulator-name = "fet6";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       fet7 {
+                               regulator-name = "fet7";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo1 {
+                               regulator-name = "ldo1";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo2 {
+                               regulator-name = "ldo2";
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+       };