Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / regulator / 88pm800.txt

diff --git a/kernel/Documentation/devicetree/bindings/regulator/88pm800.txt b/kernel/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644 (file)
index 0000000..e8a54c2
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+  buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+  ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+       pmic: 88pm800@31 {
+               compatible = "marvell,88pm800";
+               reg = <0x31>;
+
+               regulators {
+                       buck1 {
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <3950000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+                       ldo1 {
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <15000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+...
+               };
+       };