Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / phy / phy-mvebu.txt

diff --git a/kernel/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/kernel/Documentation/devicetree/bindings/phy/phy-mvebu.txt
new file mode 100644 (file)
index 0000000..f95b626
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/phy/phy-mvebu.txt
@@ -0,0 +1,43 @@
+* Marvell MVEBU SATA PHY
+
+Power control for the SATA phy found on Marvell MVEBU SoCs.
+
+This document extends the binding described in phy-bindings.txt
+
+Required properties :
+
+ - reg            : Offset and length of the register set for the SATA device
+ - compatible     : Should be "marvell,mvebu-sata-phy"
+ - clocks         : phandle of clock and specifier that supplies the device
+ - clock-names    : Should be "sata"
+
+Example:
+               sata-phy@84000 {
+                       compatible = "marvell,mvebu-sata-phy";
+                       reg = <0x84000 0x0334>;
+                       clocks = <&gate_clk 15>;
+                       clock-names = "sata";
+                       #phy-cells = <0>;
+                       status = "ok";
+               };
+
+Armada 375 USB cluster
+----------------------
+
+Armada 375 comes with an USB2 host and device controller and an USB3
+controller. The USB cluster control register allows to manage common
+features of both USB controllers.
+
+Required properties:
+
+- compatible: "marvell,armada-375-usb-cluster"
+- reg: Should contain usb cluster register location and length.
+- #phy-cells : from the generic phy bindings, must be 1. Possible
+values are 1 (USB2), 2 (USB3).
+
+Example:
+               usbcluster: usb-cluster@18400 {
+                       compatible = "marvell,armada-375-usb-cluster";
+                       reg = <0x18400 0x4>;
+                       #phy-cells = <1>
+               };