Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / net / marvell-pxa168.txt

diff --git a/kernel/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/kernel/Documentation/devicetree/bindings/net/marvell-pxa168.txt
new file mode 100644 (file)
index 0000000..845a148
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/net/marvell-pxa168.txt
@@ -0,0 +1,36 @@
+* Marvell PXA168 Ethernet Controller
+
+Required properties:
+- compatible: should be "marvell,pxa168-eth".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- clocks: pointer to the clock for the device.
+
+Optional properties:
+- port-id: Ethernet port number. Should be '0','1' or '2'.
+- #address-cells: must be 1 when using sub-nodes.
+- #size-cells: must be 0 when using sub-nodes.
+- phy-handle: see ethernet.txt file in the same directory.
+- local-mac-address: see ethernet.txt file in the same directory.
+
+Sub-nodes:
+Each PHY can be represented as a sub-node. This is not mandatory.
+
+Sub-nodes required properties:
+- reg: the MDIO address of the PHY.
+
+Example:
+
+       eth0: ethernet@f7b90000 {
+               compatible = "marvell,pxa168-eth";
+               reg = <0xf7b90000 0x10000>;
+               clocks = <&chip CLKID_GETH0>;
+               interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               phy-handle = <&ethphy0>;
+
+               ethphy0: ethernet-phy@0 {
+                       reg = <0>;
+               };
+       };