Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / net / cavium-mix.txt

diff --git a/kernel/Documentation/devicetree/bindings/net/cavium-mix.txt b/kernel/Documentation/devicetree/bindings/net/cavium-mix.txt
new file mode 100644 (file)
index 0000000..8d7c309
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/net/cavium-mix.txt
@@ -0,0 +1,34 @@
+* MIX Ethernet controller.
+
+Properties:
+- compatible: "cavium,octeon-5750-mix"
+
+  Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX
+  devices.
+
+- reg: The base addresses of four separate register banks.  The first
+  bank contains the MIX registers.  The second bank the corresponding
+  AGL registers.  The third bank are the AGL registers shared by all
+  MIX devices present.  The fourth bank is the AGL_PRT_CTL shared by
+  all MIX devices present.
+
+- cell-index: A single cell specifying which portion of the shared
+  register banks corresponds to this MIX device.
+
+- interrupts: Two interrupt specifiers.  The first is the MIX
+  interrupt routing and the second the routing for the AGL interrupts.
+
+- phy-handle: Optional, see ethernet.txt file in the same directory.
+
+Example:
+       ethernet@1070000100800 {
+               compatible = "cavium,octeon-5750-mix";
+               reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+                     <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+                     <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
+                     <0x11800 0xE0002008 0x0 0x8>;   /* AGL_PRT_CTL */
+               cell-index = <1>;
+               interrupts = <1 18>, < 1 46>;
+               local-mac-address = [ 00 0f b7 10 63 54 ];
+               phy-handle = <&phy1>;
+       };