Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / net / can / xilinx_can.txt

diff --git a/kernel/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/kernel/Documentation/devicetree/bindings/net/can/xilinx_can.txt
new file mode 100644 (file)
index 0000000..fe38847
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/net/can/xilinx_can.txt
@@ -0,0 +1,44 @@
+Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible           : Should be "xlnx,zynq-can-1.0" for Zynq CAN
+                         controllers and "xlnx,axi-can-1.00.a" for Axi CAN
+                         controllers.
+- reg                  : Physical base address and size of the Axi CAN/Zynq
+                         CANPS registers map.
+- interrupts           : Property with a value describing the interrupt
+                         number.
+- interrupt-parent     : Must be core interrupt controller
+- clock-names          : List of input clock names - "can_clk", "pclk"
+                         (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
+                         (See clock bindings for details).
+- clocks               : Clock phandles (see clock bindings for details).
+- tx-fifo-depth                : Can Tx fifo depth.
+- rx-fifo-depth                : Can Rx fifo depth.
+
+
+Example:
+
+For Zynq CANPS Dts file:
+       zynq_can_0: can@e0008000 {
+                       compatible = "xlnx,zynq-can-1.0";
+                       clocks = <&clkc 19>, <&clkc 36>;
+                       clock-names = "can_clk", "pclk";
+                       reg = <0xe0008000 0x1000>;
+                       interrupts = <0 28 4>;
+                       interrupt-parent = <&intc>;
+                       tx-fifo-depth = <0x40>;
+                       rx-fifo-depth = <0x40>;
+               };
+For Axi CAN Dts file:
+       axi_can_0: axi-can@40000000 {
+                       compatible = "xlnx,axi-can-1.00.a";
+                       clocks = <&clkc 0>, <&clkc 1>;
+                       clock-names = "can_clk","s_axi_aclk" ;
+                       reg = <0x40000000 0x10000>;
+                       interrupt-parent = <&intc>;
+                       interrupts = <0 59 1>;
+                       tx-fifo-depth = <0x40>;
+                       rx-fifo-depth = <0x40>;
+               };