Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / net / broadcom-bcm87xx.txt

diff --git a/kernel/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt b/kernel/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
new file mode 100644 (file)
index 0000000..7c86d5e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
@@ -0,0 +1,29 @@
+The Broadcom BCM87XX devices are a family of 10G Ethernet PHYs.  They
+have these bindings in addition to the standard PHY bindings.
+
+Compatible: Should contain "broadcom,bcm8706" or "broadcom,bcm8727" and
+            "ethernet-phy-ieee802.3-c45"
+
+Optional Properties:
+
+- broadcom,c45-reg-init : one of more sets of 4 cells.  The first cell
+  is the MDIO Manageable Device (MMD) address, the second a register
+  address within the MMD, the third cell contains a mask to be ANDed
+  with the existing register value, and the fourth cell is ORed with
+  he result to yield the new register value.  If the third cell has a
+  value of zero, no read of the existing value is performed.
+
+Example:
+
+       ethernet-phy@5 {
+               reg = <5>;
+               compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45";
+               interrupt-parent = <&gpio>;
+               interrupts = <12 8>; /* Pin 12, active low */
+               /*
+                * Set PMD Digital Control Register for
+                * GPIO[1] Tx/Rx
+                * GPIO[0] R64 Sync Acquired
+                */
+               broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>;
+       };