Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mfd / twl4030-power.txt

diff --git a/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt
new file mode 100644 (file)
index 0000000..3d19963
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -0,0 +1,48 @@
+Texas Instruments TWL family (twl4030) reset and power management module
+
+The power management module inside the TWL family provides several facilities
+to control the power resources, including power scripts. For now, the
+binding only supports the complete shutdown of the system after poweroff.
+
+Required properties:
+- compatible : must be one of the following
+       "ti,twl4030-power"
+       "ti,twl4030-power-reset"
+       "ti,twl4030-power-idle"
+       "ti,twl4030-power-idle-osc-off"
+
+The use of ti,twl4030-power-reset is recommended at least on
+3530 that needs a special configuration for warm reset to work.
+
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
+When using ti,twl4030-power-idle-osc-off, the TI recommended
+configuration is used with the external oscillator being shut
+down during off-idle. Note that this does not work on all boards
+depending on how the external oscillator is wired.
+
+Optional properties:
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
+
+Example:
+&i2c1 {
+       clock-frequency = <2600000>;
+
+       twl: twl@48 {
+               reg = <0x48>;
+               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+               interrupt-parent = <&intc>;
+
+               twl_power: power {
+                       compatible = "ti,twl4030-power";
+                       ti,use_poweroff;
+               };
+       };
+};