--- /dev/null
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+ vaux2, vaux33, vmmc, vbb
+ tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+ ldo6, ldo7, ldo8
+
+- xxx-supply: Input voltage supply regulator.
+ These entries are require if regulators are enabled for a device. Missing of these
+ properties can cause the regulator registration fails.
+ If some of input supply is powered through battery or always-on supply then
+ also it is require to have these parameters with proper node handle of always
+ on power supply.
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC and VBB input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+ in TPS6591X datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+ There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+ control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps65910@d2 {
+ compatible = "ti,tps65910";
+ reg = <0xd2>;
+ interrupt-parent = <&intc>;
+ interrupts = < 0 118 0x04 >;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ ti,vmbch-threshold = 0;
+ ti,vmbch2-threshold = 0;
+ ti,en-ck32k-xtal;
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+ vcc1-supply = <®_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <...>;
+ vcc4-supply = <...>;
+ vcc5-supply = <...>;
+ vcc6-supply = <...>;
+ vcc7-supply = <...>;
+ vccio-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ regulator-compatible = "vdd1";
+ reg = <0>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vdd2_reg: regulator@1 {
+ regulator-compatible = "vdd2";
+ reg = <1>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <4>;
+ };
+ vddctrl_reg: regulator@2 {
+ regulator-compatible = "vddctrl";
+ reg = <2>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vio_reg: regulator@3 {
+ regulator-compatible = "vio";
+ reg = <3>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo1_reg: regulator@4 {
+ regulator-compatible = "ldo1";
+ reg = <4>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo2_reg: regulator@5 {
+ regulator-compatible = "ldo2";
+ reg = <5>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo3_reg: regulator@6 {
+ regulator-compatible = "ldo3";
+ reg = <6>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo4_reg: regulator@7 {
+ regulator-compatible = "ldo4";
+ reg = <7>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo5_reg: regulator@8 {
+ regulator-compatible = "ldo5";
+ reg = <8>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo6_reg: regulator@9 {
+ regulator-compatible = "ldo6";
+ reg = <9>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo7_reg: regulator@10 {
+ regulator-compatible = "ldo7";
+ reg = <10>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo8_reg: regulator@11 {
+ regulator-compatible = "ldo8";
+ reg = <11>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ };
+ };
Code Review / kvmfornfv.git / blobdiff