Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mfd / tps6507x.txt

diff --git a/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100755 (executable)
index 0000000..8fffa3c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the
+  given device need to be present. The definition for each of these nodes
+  is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
+
+  The valid regulator-compatible values are:
+  tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+  These entries are required if regulators are enabled for a device.
+  Missing of these properties can cause the regulator registration
+  fails.
+  If some of input supply is powered through battery or always-on
+  supply then also it is require to have these parameters with proper
+  node handle of always on power supply.
+  tps6507x:
+       vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+       vindcdc3-supply  : VDCDC3 input.
+       vldo1_2-supply   : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+                       0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+                       1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+  If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+       pmu: tps6507x@48 {
+               compatible = "ti,tps6507x";
+               reg = <0x48>;
+
+               vindcdc1_2-supply = <&vbat>;
+               vindcdc3-supply = <...>;
+               vinldo1_2-supply = <...>;
+
+               regulators {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       vdcdc1_reg: regulator@0 {
+                               regulator-compatible = "VDCDC1";
+                               reg = <0>;
+                               regulator-min-microvolt = <3150000>;
+                               regulator-max-microvolt = <3450000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+                       vdcdc2_reg: regulator@1 {
+                               regulator-compatible = "VDCDC2";
+                               reg = <1>;
+                               regulator-min-microvolt = <1710000>;
+                               regulator-max-microvolt = <3450000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                               defdcdc_default = <1>;
+                       };
+                       vdcdc3_reg: regulator@2 {
+                               regulator-compatible = "VDCDC3";
+                               reg = <2>;
+                               regulator-min-microvolt = <950000>
+                               regulator-max-microvolt = <1350000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                               defdcdc_default = <1>;
+                       };
+                       ldo1_reg: regulator@3 {
+                               regulator-compatible = "LDO1";
+                               reg = <3>;
+                               regulator-min-microvolt = <1710000>;
+                               regulator-max-microvolt = <1890000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+                       ldo2_reg: regulator@4 {
+                               regulator-compatible = "LDO2";
+                               reg = <4>;
+                               regulator-min-microvolt = <1140000>;
+                               regulator-max-microvolt = <1320000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+               };
+
+       };