Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mfd / rn5t618.txt

diff --git a/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt b/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt
new file mode 100644 (file)
index 0000000..937785a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -0,0 +1,36 @@
+* Ricoh RN5T618 PMIC
+
+Ricoh RN5T618 is a power management IC which integrates 3 step-down
+DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
+fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
+through a I2C interface.
+
+Required properties:
+ - compatible: should be "ricoh,rn5t618"
+ - reg: the I2C slave address of the device
+
+Sub-nodes:
+ - regulators: the node is required if the regulator functionality is
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
+   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   The common bindings for each individual regulator can be found in:
+   Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+       pmic@32 {
+               compatible = "ricoh,rn5t618";
+               reg = <0x32>;
+
+               regulators {
+                       DCDC1 {
+                               regulator-min-microvolt = <1050000>;
+                               regulator-max-microvolt = <1050000>;
+                       };
+
+                       DCDC2 {
+                               regulator-min-microvolt = <1175000>;
+                               regulator-max-microvolt = <1175000>;
+                       };
+               };
+       };