Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / leds / pca963x.txt

diff --git a/kernel/Documentation/devicetree/bindings/leds/pca963x.txt b/kernel/Documentation/devicetree/bindings/leds/pca963x.txt
new file mode 100644 (file)
index 0000000..dafbe99
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -0,0 +1,48 @@
+LEDs connected to pca9632, pca9633 or pca9634
+
+Required properties:
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
+
+Optional properties:
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+  to open-drain, newer chips to totem pole)
+- nxp,hw-blink : use hardware blinking instead of software blinking
+
+Each led is represented as a sub-node of the nxp,pca963x device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+               0 to 7 in pca9634, or 0 to 15 in pca9635)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9632: pca9632 {
+       compatible = "nxp,pca9632";
+       #address-cells = <1>;
+       #size-cells = <0>;
+       reg = <0x62>;
+
+       red@0 {
+               label = "red";
+               reg = <0>;
+               linux,default-trigger = "none";
+       };
+       green@1 {
+               label = "green";
+               reg = <1>;
+               linux,default-trigger = "none";
+       };
+       blue@2 {
+               label = "blue";
+               reg = <2>;
+               linux,default-trigger = "none";
+       };
+       unused@3 {
+               label = "unused";
+               reg = <3>;
+               linux,default-trigger = "none";
+       };
+};