These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / leds / leds-netxbig.txt

diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644 (file)
index 0000000..5ef92a2
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+  Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+  A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- max-brightness: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+       compatible = "lacie,netxbig-leds";
+
+       gpio-ext = &gpio_ext;
+
+       timers = <NETXBIG_LED_TIMER1 500 500
+                 NETXBIG_LED_TIMER2 500 1000>;
+
+       blue-power {
+               label = "netxbig:blue:power";
+               mode-addr = <0>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 1
+                           NETXBIG_LED_TIMER1 3
+                           NETXBIG_LED_TIMER2 7>;
+               bright-addr = <1>;
+               max-brightness = <7>;
+       };
+       red-power {
+               label = "netxbig:red:power";
+               mode-addr = <0>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 2
+                           NETXBIG_LED_TIMER1 4>;
+               bright-addr = <1>;
+               max-brightness = <7>;
+       };
+       blue-sata0 {
+               label = "netxbig:blue:sata0";
+               mode-addr = <3>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 7
+                           NETXBIG_LED_SATA 1
+                           NETXBIG_LED_TIMER1 3>;
+               bright-addr = <2>;
+               max-brightness = <7>;
+       };
+       red-sata0 {
+               label = "netxbig:red:sata0";
+               mode-addr = <3>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 2
+                           NETXBIG_LED_TIMER1 4>;
+               bright-addr = <2>;
+               max-brightness = <7>;
+       };
+       blue-sata1 {
+               label = "netxbig:blue:sata1";
+               mode-addr = <4>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 7
+                           NETXBIG_LED_SATA 1
+                           NETXBIG_LED_TIMER1 3>;
+               bright-addr = <2>;
+               max-brightness = <7>;
+       };
+       red-sata1 {
+               label = "netxbig:red:sata1";
+               mode-addr = <4>;
+               mode-val = <NETXBIG_LED_OFF 0
+                           NETXBIG_LED_ON 2
+                           NETXBIG_LED_TIMER1 4>;
+               bright-addr = <2>;
+               max-brightness = <7>;
+       };
+};