Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / arm / ste-u300.txt

diff --git a/kernel/Documentation/devicetree/bindings/arm/ste-u300.txt b/kernel/Documentation/devicetree/bindings/arm/ste-u300.txt
new file mode 100644 (file)
index 0000000..d11d800
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/ste-u300.txt
@@ -0,0 +1,46 @@
+ST-Ericsson U300 Device Tree Bindings
+
+For various board the "board" node may contain specific properties
+that pertain to this particular board, such as board-specific GPIOs
+or board power regulator supplies.
+
+Required root node property:
+
+compatible="stericsson,u300";
+
+Required node: syscon
+This contains the system controller.
+- compatible: must be "stericsson,u300-syscon".
+- reg: the base address and size of the system controller.
+
+Boards with the U300 SoC include:
+
+S365 "Small Board U365":
+
+Required node: s365
+This contains the board-specific information.
+- compatible: must be "stericsson,s365".
+- vana15-supply: the regulator supplying the 1.5V to drive the
+  board.
+- syscon: a pointer to the syscon node so we can access the
+  syscon registers to set the board as self-powered.
+
+Example:
+
+/ {
+       model = "ST-Ericsson U300";
+       compatible = "stericsson,u300";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       s365 {
+               compatible = "stericsson,s365";
+               vana15-supply = <&ab3100_ldo_d_reg>;
+               syscon = <&syscon>;
+       };
+
+       syscon: syscon@c0011000 {
+               compatible = "stericsson,u300-syscon";
+               reg = <0xc0011000 0x1000>;
+       };
+};