These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / arm / sp810.txt

diff --git a/kernel/Documentation/devicetree/bindings/arm/sp810.txt b/kernel/Documentation/devicetree/bindings/arm/sp810.txt
new file mode 100644 (file)
index 0000000..6808fb5
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/sp810.txt
@@ -0,0 +1,46 @@
+SP810 System Controller
+-----------------------
+
+Required properties:
+
+- compatible:  standard compatible string for a Primecell peripheral,
+               see Documentation/devicetree/bindings/arm/primecell.txt
+               for more details
+               should be: "arm,sp810", "arm,primecell"
+
+- reg:         standard registers property, physical address and size
+               of the control registers
+
+- clock-names: from the common clock bindings, for more details see
+               Documentation/devicetree/bindings/clock/clock-bindings.txt;
+               should be: "refclk", "timclk", "apb_pclk"
+
+- clocks:      from the common clock bindings, phandle and clock
+               specifier pairs for the entries of clock-names property
+
+- #clock-cells: from the common clock bindings;
+               should be: <1>
+
+- clock-output-names: from the common clock bindings;
+               should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
+
+- assigned-clocks: from the common clock binding;
+               should be: clock specifier for each output clock of this
+               provider node
+
+- assigned-clock-parents: from the common clock binding;
+               should be: phandle of input clock listed in clocks
+               property with the highest frequency
+
+Example:
+       v2m_sysctl: sysctl@020000 {
+               compatible = "arm,sp810", "arm,primecell";
+               reg = <0x020000 0x1000>;
+               clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+               clock-names = "refclk", "timclk", "apb_pclk";
+               #clock-cells = <1>;
+               clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+               assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+               assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+
+       };