Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / arm / omap / omap.txt

diff --git a/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt b/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644 (file)
index 0000000..4f6a82c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,154 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+address range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+SoC Type (optional):
+
+- General Purpose devices
+  compatible = "ti,gp"
+- High Security devices
+  compatible = "ti,hs"
+
+SoC Families:
+
+- OMAP2 generic - defaults to OMAP2420
+  compatible = "ti,omap2"
+- OMAP3 generic - defaults to OMAP3430
+  compatible = "ti,omap3"
+- OMAP4 generic - defaults to OMAP4430
+  compatible = "ti,omap4"
+- OMAP5 generic - defaults to OMAP5430
+  compatible = "ti,omap5"
+- DRA7 generic - defaults to DRA742
+  compatible = "ti,dra7"
+- AM43x generic - defaults to AM4372
+  compatible = "ti,am43"
+
+SoCs:
+
+- OMAP2420
+  compatible = "ti,omap2420", "ti,omap2"
+- OMAP2430
+  compatible = "ti,omap2430", "ti,omap2"
+
+- OMAP3430
+  compatible = "ti,omap3430", "ti,omap3"
+- AM3517
+  compatible = "ti,am3517", "ti,omap3"
+- OMAP3630
+  compatible = "ti,omap36xx", "ti,omap3"
+- AM33xx
+  compatible = "ti,am33xx", "ti,omap3"
+
+- OMAP4430
+  compatible = "ti,omap4430", "ti,omap4"
+- OMAP4460
+  compatible = "ti,omap4460", "ti,omap4"
+
+- OMAP5430
+  compatible = "ti,omap5430", "ti,omap5"
+- OMAP5432
+  compatible = "ti,omap5432", "ti,omap5"
+
+- DRA742
+  compatible = "ti,dra742", "ti,dra74", "ti,dra7"
+
+- DRA722
+  compatible = "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5728
+  compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5726
+  compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5718
+  compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5716
+  compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM4372
+  compatible = "ti,am4372", "ti,am43"
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+  compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
+
+- OMAP4 SDP : Software Development Board
+  compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+  compatible = "ti,omap4-panda", "ti,omap4430"
+
+- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
+  compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+- OMAP4 VAR-STK-OM44 : Commercial dev kit with VAR-OM44CustomBoard and VAR-SOM-OM44 w/WLAN
+  compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+- OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD touchscreen
+  compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
+  compatible = "ti,omap3-evm", "ti,omap3"
+
+- AM335X EVM : Software Development Board for AM335x
+  compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- AM335X Bone : Low cost community board
+  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+
+- AM335X OrionLXm : Substation Automation Platform
+  compatible = "novatech,am335x-lxm", "ti,am33xx"
+
+- OMAP5 EVM : Evaluation Module
+  compatible = "ti,omap5-evm", "ti,omap5"
+
+- AM43x EPOS EVM
+  compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+
+- AM437x GP EVM
+  compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
+- DRA742 EVM:  Software Development Board for DRA742
+  compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- DRA722 EVM: Software Development Board for DRA722
+  compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"