Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / arm / Samsung-S3C24XX / EB2410ITX.txt

diff --git a/kernel/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/kernel/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
new file mode 100644 (file)
index 0000000..b87292e
--- /dev/null
+++ b/kernel/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -0,0 +1,58 @@
+               Simtec Electronics EB2410ITX (BAST)
+               ===================================
+
+       http://www.simtec.co.uk/products/EB2410ITX/
+
+Introduction
+------------
+
+  The EB2410ITX is a S3C2410 based development board with a variety of
+  peripherals and expansion connectors. This board is also known by
+  the shortened name of Bast.
+
+
+Configuration
+-------------
+
+  To set the default configuration, use `make bast_defconfig` which
+  supports the commonly used features of this board.
+
+
+Support
+-------
+
+  Official support information can be found on the Simtec Electronics
+  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
+
+  Useful links:
+
+    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
+
+    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
+
+    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
+      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
+
+
+MTD
+---
+
+  The NAND and NOR support has been merged from the linux-mtd project.
+  Any problems, see http://www.linux-mtd.infradead.org/ for more
+  information or up-to-date versions of linux-mtd.
+
+
+IDE
+---
+
+  Both onboard IDE ports are supported, however there is no support for
+  changing speed of devices, PIO Mode 4 capable drives should be used.
+
+
+Maintainers
+-----------
+
+  This board is maintained by Simtec Electronics.
+
+
+Copyright 2004 Ben Dooks, Simtec Electronics