--- /dev/null
+Note: Attributes that are shared between devices are stored in the directory
+pointed to by the symlink device/.
+Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is
+/sys/class/cxl/afu0.0s/device/irqs_max, i.e. /sys/class/cxl/afu0.0/irqs_max.
+
+
+Slave contexts (eg. /sys/class/cxl/afu0.0s):
+
+What: /sys/class/cxl/<afu>/irqs_max
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Decimal value of maximum number of interrupts that can be
+ requested by userspace. The default on probe is the maximum
+ that hardware can support (eg. 2037). Write values will limit
+ userspace applications to that many userspace interrupts. Must
+ be >= irqs_min.
+
+What: /sys/class/cxl/<afu>/irqs_min
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the minimum number of interrupts that
+ userspace must request on a CXL_START_WORK ioctl. Userspace may
+ omit the num_interrupts field in the START_WORK IOCTL to get
+ this minimum automatically.
+
+What: /sys/class/cxl/<afu>/mmio_size
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the size of the MMIO space that may be mmaped
+ by userspace.
+
+What: /sys/class/cxl/<afu>/modes_supported
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ List of the modes this AFU supports. One per line.
+ Valid entries are: "dedicated_process" and "afu_directed"
+
+What: /sys/class/cxl/<afu>/mode
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ The current mode the AFU is using. Will be one of the modes
+ given in modes_supported. Writing will change the mode
+ provided that no user contexts are attached.
+
+
+What: /sys/class/cxl/<afu>/prefault_mode
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Set the mode for prefaulting in segments into the segment table
+ when performing the START_WORK ioctl. Possible values:
+ none: No prefaulting (default)
+ work_element_descriptor: Treat the work element
+ descriptor as an effective address and
+ prefault what it points to.
+ all: all segments process calling START_WORK maps.
+
+What: /sys/class/cxl/<afu>/reset
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: write only
+ Writing 1 here will reset the AFU provided there are not
+ contexts active on the AFU.
+
+What: /sys/class/cxl/<afu>/api_version
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the current version of the kernel/user API.
+
+What: /sys/class/cxl/<afu>/api_version_compatible
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the the lowest version of the userspace API
+ this this kernel supports.
+
+
+AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
+
+An AFU may optionally export one or more PCIe like configuration records, known
+as AFU configuration records, which will show up here (if present).
+
+What: /sys/class/cxl/<afu>/cr<config num>/vendor
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the vendor ID found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/device
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the device ID found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/class
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Hexadecimal value of the class code found in this AFU
+ configuration record.
+
+What: /sys/class/cxl/<afu>/cr<config num>/config
+Date: February 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ This binary file provides raw access to the AFU configuration
+ record. The format is expected to match the either the standard
+ or extended configuration space defined by the PCIe
+ specification.
+
+
+
+Master contexts (eg. /sys/class/cxl/afu0.0m)
+
+What: /sys/class/cxl/<afu>m/mmio_size
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the size of the MMIO space that may be mmaped
+ by userspace. This includes all slave contexts space also.
+
+What: /sys/class/cxl/<afu>m/pp_mmio_len
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the Per Process MMIO space length.
+
+What: /sys/class/cxl/<afu>m/pp_mmio_off
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Decimal value of the Per Process MMIO space offset.
+
+
+Card info (eg. /sys/class/cxl/card0)
+
+What: /sys/class/cxl/<card>/caia_version
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Identifies the CAIA Version the card implements.
+
+What: /sys/class/cxl/<card>/psl_revision
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Identifies the revision level of the PSL.
+
+What: /sys/class/cxl/<card>/base_image
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Identifies the revision level of the base image for devices
+ that support loadable PSLs. For FPGAs this field identifies
+ the image contained in the on-adapter flash which is loaded
+ during the initial program load.
+
+What: /sys/class/cxl/<card>/image_loaded
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Will return "user" or "factory" depending on the image loaded
+ onto the card.
+
+What: /sys/class/cxl/<card>/load_image_on_perst
+Date: December 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Valid entries are "none", "user", and "factory".
+ "none" means PERST will not cause image to be loaded to the
+ card. A power cycle is required to load the image.
+ "none" could be useful for debugging because the trace arrays
+ are preserved.
+ "user" and "factory" means PERST will cause either the user or
+ user or factory image to be loaded.
+ Default is to reload on PERST whichever image the card has
+ loaded.
+
+What: /sys/class/cxl/<card>/reset
+Date: October 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: write only
+ Writing 1 will issue a PERST to card which may cause the card
+ to reload the FPGA depending on load_image_on_perst.
Code Review / kvmfornfv.git / blobdiff