Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / Documentation / ABI / testing / sysfs-bus-usb-devices-usbsevseg

diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/kernel/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
new file mode 100644 (file)
index 0000000..70d00df
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg
@@ -0,0 +1,43 @@
+Where:         /sys/bus/usb/.../powered
+Date:          August 2008
+Kernel Version:        2.6.26
+Contact:       Harrison Metzger <harrisonmetz@gmail.com>
+Description:   Controls whether the device's display will powered.
+               A value of 0 is off and a non-zero value is on.
+
+Where:         /sys/bus/usb/.../mode_msb
+Where:         /sys/bus/usb/.../mode_lsb
+Date:          August 2008
+Kernel Version:        2.6.26
+Contact:       Harrison Metzger <harrisonmetz@gmail.com>
+Description:   Controls the devices display mode.
+               For a 6 character display the values are
+                       MSB 0x06; LSB 0x3F, and
+               for an 8 character display the values are
+                       MSB 0x08; LSB 0xFF.
+
+Where:         /sys/bus/usb/.../textmode
+Date:          August 2008
+Kernel Version:        2.6.26
+Contact:       Harrison Metzger <harrisonmetz@gmail.com>
+Description:   Controls the way the device interprets its text buffer.
+               raw:    each character controls its segment manually
+               hex:    each character is between 0-15
+               ascii:  each character is between '0'-'9' and 'A'-'F'.
+
+Where:         /sys/bus/usb/.../text
+Date:          August 2008
+Kernel Version:        2.6.26
+Contact:       Harrison Metzger <harrisonmetz@gmail.com>
+Description:   The text (or data) for the device to display
+
+Where:         /sys/bus/usb/.../decimals
+Date:          August 2008
+Kernel Version:        2.6.26
+Contact:       Harrison Metzger <harrisonmetz@gmail.com>
+Description:   Controls the decimal places on the device.
+               To set the nth decimal place, give this field
+               the value of 10 ** n. Assume this field has
+               the value k and has 1 or more decimal places set,
+               to set the mth place (where m is not already set),
+               change this fields value to k + 10 ** m.