#!/bin/bash
# SPDX-license-identifier: Apache-2.0
##############################################################################
-# Copyright (c)
+# Copyright (c) Ericsson AB and others
# All rights reserved. This program and the accompanying materials
# are made available under the terms of the Apache License, Version 2.0
# which accompanies this distribution, and is available at
# http://www.apache.org/licenses/LICENSE-2.0
##############################################################################
-# Clean up
-clean_up() {
- if sudo virsh list --all | grep "${VM_NAME}.*running" ; then
- sudo virsh destroy "$VM_NAME"
+check_prerequisites() {
+ echo "Info : Check prerequisites"
+
+ #-------------------------------------------------------------------------------
+ # We shouldn't be running as root
+ #-------------------------------------------------------------------------------
+ if [[ "$(whoami)" == "root" ]]; then
+ echo "ERROR : This script must not be run as root!"
+ echo " Please switch to a regular user before running the script."
+ exit 1
fi
- if sudo virsh list --all | grep "${VM_NAME}" ; then
- sudo virsh undefine "$VM_NAME"
+
+ #-------------------------------------------------------------------------------
+ # Check for passwordless sudo
+ #-------------------------------------------------------------------------------
+ if ! sudo -n "true"; then
+ echo "ERROR : passwordless sudo is needed for '$(id -nu)' user."
+ exit 1
fi
- sudo rm -rf "/var/lib/libvirt/images/$VM_NAME"
- sleep 5
-}
-# Create jumphost VM
-create_jump() {
- ./create_vm.sh "$VM_NAME"
- jumpbox_ip=$(get_vm_ip)
- i=0
- while [ -z $jumpbox_ip ]; do
- sleep $((++i))
- jumpbox_ip=$(get_vm_ip)
- done
- i=0
- until nc -w5 -z $jumpbox_ip 22; do
- sleep $((++i))
- done
+ #-------------------------------------------------------------------------------
+ # Check if SSH key exists
+ #-------------------------------------------------------------------------------
+ if [[ ! -f "$HOME/.ssh/id_rsa" ]]; then
+ echo "ERROR : You must have SSH keypair in order to run this script!"
+ exit 1
+ fi
+
+ #-------------------------------------------------------------------------------
+ # We are using sudo so we need to make sure that env_reset is not present
+ #-------------------------------------------------------------------------------
+ sudo sed -i "s/^Defaults.*env_reset/#&/" /etc/sudoers
+
+ #-------------------------------------------------------------------------------
+ # Check if Ansible is installed
+ #-------------------------------------------------------------------------------
+ if ! command -v ansible &> /dev/null; then
+ echo "ERROR : Ansible not found. Please install."
+ exit 1
+ fi
+
+ #-------------------------------------------------------------------------------
+ # Check is yq is installed
+ #-------------------------------------------------------------------------------
+ if ! command -v yq &> /dev/null; then
+ echo "ERROR : yq not found. Please install."
+ exit 1
+ fi
+
+ #-------------------------------------------------------------------------------
+ # Check is libvirt is installed
+ #-------------------------------------------------------------------------------
+ if ! command -v virsh &> /dev/null; then
+ echo "ERROR : Libvirt not found. Please install."
+ exit 1
+ fi
+
+ #-------------------------------------------------------------------------------
+ # Check if user belongs to libvirt's group
+ #-------------------------------------------------------------------------------
+ libvirt_group="libvirt"
+ # shellcheck disable=SC1091
+ source /etc/os-release || source /usr/lib/os-release
+ if [ "${ID,,}" == "ubuntu" ] && [ "$VERSION_ID" == "16.04" ]; then
+ libvirt_group+="d"
+ fi
+ if ! groups | grep "$libvirt_group"; then
+ echo "ERROR : $(id -nu) user doesn't belong to $libvirt_group group."
+ exit 1
+ fi
}
# Get jumphost VM IP
-get_vm_ip() {
- sudo virsh domifaddr "$VM_NAME" | awk 'FNR == 3 {gsub(/\/.*/, ""); print $4}'
+get_host_pxe_ip() {
+ local PXE_NETWORK
+ local PXE_IF_INDEX
+ local PXE_IF_IP
+
+ host=$1
+ if [[ "$host" == "" ]]; then
+ echo "ERROR : get_ip - host parameter not provided"
+ exit 1
+ fi
+
+ PXE_NETWORK=$(yq r "$CURRENTPATH"/hw_config/"$VENDOR"/idf.yaml engine.pxe_network)
+ if [[ "$PXE_NETWORK" == "" ]]; then
+ echo "ERROR : PXE network for jump VM not defined in IDF."
+ exit 1
+ fi
+
+ PXE_IF_INDEX=$(yq r "$CURRENTPATH"/hw_config/"${VENDOR}"/idf.yaml idf.net_config."$PXE_NETWORK".interface)
+ if [[ "$PXE_IF_INDEX" == "" ]]; then
+ echo "ERROR : Index of PXE interface not found in IDF."
+ exit 1
+ fi
+
+ PXE_IF_IP=$(yq r "$CURRENTPATH"/hw_config/"${VENDOR}"/pdf.yaml "$host".interfaces["$PXE_IF_INDEX"].address)
+ if [[ "$PXE_IF_IP" == "" ]]; then
+ echo "ERROR : IP of PXE interface not found in PDF."
+ exit 1
+ fi
+ echo "$PXE_IF_IP"
}
-# Setup PXE network
-setup_PXE_network() {
- # shellcheck disable=SC2087
- ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
-sudo ifconfig $PXE_IF up
-sudo ifconfig $PXE_IF $PXE_IF_IP netmask $NETMASK
-sudo ifconfig $PXE_IF hw ether $PXE_IF_MAC
-EOF
+get_vm_ip() {
+ ip=$(get_host_pxe_ip "jumphost")
+ echo "$ip"
}
+
# Copy files needed by Infra engine & BMRA in the jumphost VM
copy_files_jump() {
scp -r -o StrictHostKeyChecking=no \
# Host Provisioning
provision_hosts() {
# shellcheck disable=SC2087
- ssh -tT "$USERNAME"@"$(get_vm_ip)" << EOF
+ ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
# Install and run cloud-infra
if [ ! -d "${PROJECT_ROOT}/engine" ]; then
ssh-keygen -t rsa -N "" -f ${PROJECT_ROOT}/.ssh/id_rsa
# Setup networking on provisioned hosts (Adapt setup_network.sh according to your network setup)
setup_network() {
+# Set Upper limit of number nodes in RI2 cluster (starting from 0)
+NODE_MAX_ID=$(($(yq r "$CURRENTPATH"/hw_config/"$VENDOR"/idf.yaml --length idf.kubespray.hostnames)-1))
+
+for idx in $(seq 0 "$NODE_MAX_ID")
+do
+ NODE_IP=$(get_host_pxe_ip "nodes[${idx}]")
+# SSH to jumphost
# shellcheck disable=SC2087
- ssh -tT "$USERNAME"@"$(get_vm_ip)" << EOF
-ssh -o StrictHostKeyChecking=no root@$MASTER_IP \
- 'bash -s' < ${PROJECT_ROOT}/${VENDOR}/setup_network.sh
-ssh -o StrictHostKeyChecking=no root@$WORKER_IP \
+ ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
+ssh -o StrictHostKeyChecking=no root@${NODE_IP} \
'bash -s' < ${PROJECT_ROOT}/${VENDOR}/setup_network.sh
EOF
+done
}
# k8s Provisioning (currently BMRA)
provision_k8s() {
# shellcheck disable=SC2087
- ssh -tT "$USERNAME"@"$(get_vm_ip)" << EOF
+ ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
# Install BMRA
-if [ ! -d "${PROJECT_ROOT}/container-experience-kits" ]; then
+if ! command -v docker; then
curl -fsSL https://get.docker.com/ | sh
printf "Waiting for docker service..."
until sudo docker info; do
printf "."
sleep 2
done
- git clone https://github.com/intel/container-experience-kits.git
- cd ${PROJECT_ROOT}/container-experience-kits
- git checkout v1.4.1
- git submodule update --init
- cp -r examples/group_vars examples/host_vars .
- cp ${PROJECT_ROOT}/${INSTALLER}/inventory.ini \
+fi
+if [ ! -d "${PROJECT_ROOT}/container-experience-kits" ]; then
+ git clone --recurse-submodules --depth 1 https://github.com/intel/container-experience-kits.git -b v1.4.1 ${PROJECT_ROOT}/container-experience-kits/
+ cp -r ${PROJECT_ROOT}/container-experience-kits/examples/group_vars ${PROJECT_ROOT}/container-experience-kits/
+#TODO Remove this once the reported issue is fixed in the next BMRA Release
+ sed -i '/\openshift/a \ extra_args: --ignore-installed PyYAML' \
+ ${PROJECT_ROOT}/container-experience-kits/roles/net-attach-defs-create/tasks/main.yml
+fi
+cp ${PROJECT_ROOT}/${INSTALLER}/inventory.ini \
${PROJECT_ROOT}/container-experience-kits/
- cp ${PROJECT_ROOT}/${INSTALLER}/all.yml \
+cp ${PROJECT_ROOT}/${INSTALLER}/{all.yml,kube-node.yml} \
${PROJECT_ROOT}/container-experience-kits/group_vars/
- cp ${PROJECT_ROOT}/${INSTALLER}/node1.yml \
- ${PROJECT_ROOT}/container-experience-kits/host_vars/
-fi
-sudo service docker start
sudo docker run --rm \
+-e ANSIBLE_CONFIG=/bmra/ansible.cfg \
-v ${PROJECT_ROOT}/container-experience-kits:/bmra \
-v ~/.ssh/:/root/.ssh/ rihabbanday/bmra-install:centos \
ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/cluster.yml