printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
}
+##verify subnet has at least n IPs
+##params: subnet mask, n IPs
+function verify_subnet_size {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ num_ips_required=$2
+
+ ##this function assumes you would never need more than 254
+ ##we check here to make sure
+ if [ "$num_ips_required" -ge 254 ]; then
+ echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
+ return 1
+ fi
+
+ ##we just return if 3rd octet is not 255
+ ##because we know the subnet is big enough
+ if [ "$i3" -ne 255 ]; then
+ return 0
+ elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
+ return 0
+ else
+ echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
+ return 1
+ fi
+}
+
##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
## Warning: This function only works for IPv4 at the moment.
##params: ip, netmask
fi
##add centos 7 box to vagrant
- if ! vagrant box list | grep chef/centos-7.0; then
- if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
+ if ! vagrant box list | grep opnfv/centos-7.0; then
+ if ! vagrant box add opnfv/centos-7.0 --provider virtualbox; then
printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
exit 1
fi
public_subnet_mask=$subnet_mask
public_short_subnet_mask=$(find_short_netmask $interface)
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: $interface_ip_arr[2] ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
##set that interface to be public
sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
if_counter=1
subnet_mask=$(find_netmask $interface)
if [ "$if_counter" -eq 0 ]; then
admin_subnet_mask=$subnet_mask
+ if ! verify_subnet_size $admin_subnet_mask 5; then
+ echo "${red} Not enough IPs in admin subnet: ${interface_ip_arr[$if_counter]} ${admin_subnet_mask}. Need at least 5 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
elif [ "$if_counter" -eq 1 ]; then
private_subnet_mask=$subnet_mask
private_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $private_subnet_mask 15; then
+ echo "${red} Not enough IPs in private subnet: ${interface_ip_arr[$if_counter]} ${private_subnet_mask}. Need at least 15 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
elif [ "$if_counter" -eq 2 ]; then
public_subnet_mask=$subnet_mask
public_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: ${interface_ip_arr[$if_counter]} ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
elif [ "$if_counter" -eq 3 ]; then
storage_subnet_mask=$subnet_mask
+
+ if ! verify_subnet_size $storage_subnet_mask 10; then
+ echo "${red} Not enough IPs in storage subnet: ${interface_ip_arr[$if_counter]} ${storage_subnet_mask}. Need at least 10 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
else
echo "${red}ERROR: interface counter outside valid range of 0 to 3: $if_counter ! ${reset}"
exit 1
fi
fi
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ echo "${blue}Controller nodes found in settings: ${controller_nodes}${reset}"
+ my_controller_array=( $controller_nodes )
+ num_control_nodes=${#my_controller_array[@]}
+ if [ "$num_control_nodes" -ne 3 ]; then
+ if cat opnfv_ksgen_settings.yml | grep ha_flag | grep true; then
+ echo "${red}Error: You must define exactly 3 control nodes when HA flag is true!${reset}"
+ exit 1
+ fi
+ else
+ echo "${blue}Number of Controller nodes detected: ${num_control_nodes}${reset}"
+ fi
+
if [ $no_parse ]; then
echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
fi
}
+##check to make sure nodes are powered off
+##this function does nothing if virtual
+##params: none
+##usage: check_baremetal_nodes()
+check_baremetal_nodes() {
+ if [ $virtual ]; then
+ echo "${blue}Skipping Baremetal node power status check as deployment is virtual ${reset}"
+ else
+ echo "${blue}Checking Baremetal nodes power state... ${reset}"
+ if [ ! -z "$base_config" ]; then
+ # Install ipmitool
+ # Major version is pinned to force some consistency for Arno
+ if ! yum list installed | grep -i ipmitool; then
+ echo "${blue}Installing ipmitool...${reset}"
+ if ! yum -y install ipmitool-1*; then
+ echo "${red}Failed to install ipmitool!${reset}"
+ exit 1
+ fi
+ fi
+
+ ###find all the bmc IPs and number of nodes
+ node_counter=0
+ output=`grep bmc_ip $base_config | grep -Eo '[0-9]+.[0-9]+.[0-9]+.[0-9]+'`
+ for line in ${output} ; do
+ bmc_ip[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ max_nodes=$((node_counter-1))
+
+ ###find bmc_users per node
+ node_counter=0
+ output=`grep bmc_user $base_config | sed 's/\s*bmc_user:\s*//'`
+ for line in ${output} ; do
+ bmc_user[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ ###find bmc_pass per node
+ node_counter=0
+ output=`grep bmc_pass $base_config | sed 's/\s*bmc_pass:\s*//'`
+ for line in ${output} ; do
+ bmc_pass[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ for mynode in `seq 0 $max_nodes`; do
+ echo "${blue}Node: ${bmc_ip[$mynode]} ${bmc_user[$mynode]} ${bmc_pass[$mynode]} ${reset}"
+ ipmi_output=`ipmitool -I lanplus -P ${bmc_pass[$mynode]} -U ${bmc_user[$mynode]} -H ${bmc_ip[$mynode]} chassis status \
+ | grep "System Power" | cut -d ':' -f2 | tr -d [:blank:]`
+ if [ "$ipmi_output" == "on" ]; then
+ echo "${red}Error: Node is powered on: ${bmc_ip[$mynode]} ${reset}"
+ echo "${red}Please run clean.sh before running deploy! ${reset}"
+ exit 1
+ elif [ "$ipmi_output" == "off" ]; then
+ echo "${blue}Node: ${bmc_ip[$mynode]} is powered off${reset}"
+ else
+ echo "${red}Warning: Unable to detect node power state: ${bmc_ip[$mynode]} ${reset}"
+ fi
+ done
+ else
+ echo "${red}base_config was not provided for a baremetal install! Exiting${reset}"
+ exit 1
+ fi
+ fi
+}
+
##END FUNCTIONS
main() {
parse_cmdline "$@"
disable_selinux
+ check_baremetal_nodes
install_EPEL
install_vbox
install_ansible
Code Review / genesis.git / blobdiff