declare -A controllers_ip_arr
declare -A admin_ip_arr
declare -A public_ip_arr
+
+vm_dir=/var/opt/opnfv
##END VARS
##FUNCTIONS
echo -e "\n -enable_virtual_dhcp : Run dhcp server instead of using static IPs. Use this with -virtual only. \n"
echo -e "\n -static_ip_range : static IP range to define when using virtual and when dhcp is not being used (default), must at least a 20 IP block. Format: '192.168.1.1,192.168.1.20' \n"
echo -e "\n -ping_site : site to use to verify IP connectivity from the VM when -virtual is used. Format: -ping_site www.blah.com \n"
+ echo -e "\n -floating_ip_count : number of IP address from the public range to be used for floating IP. Default is 20.\n"
+}
+
+##verify vm dir exists
+##params: none
+function verify_vm_dir {
+ if [ -d "$vm_dir" ]; then
+ echo -e "\n\n${red}ERROR: VM Directory: $vm_dir already exists. Environment not clean. Please use clean.sh. Exiting${reset}\n\n"
+ exit 1
+ else
+ mkdir -p $vm_dir
+ fi
+
+ chmod 700 $vm_dir
+
+ if [ ! -d $vm_dir ]; then
+ echo -e "\n\n${red}ERROR: Unable to create VM Directory: $vm_dir Exiting${reset}\n\n"
+ exit -1
+ fi
}
##find ip of interface
printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
}
+##verify subnet has at least n IPs
+##params: subnet mask, n IPs
+function verify_subnet_size {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ num_ips_required=$2
+
+ ##this function assumes you would never need more than 254
+ ##we check here to make sure
+ if [ "$num_ips_required" -ge 254 ]; then
+ echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
+ return 1
+ fi
+
+ ##we just return if 3rd octet is not 255
+ ##because we know the subnet is big enough
+ if [ "$i3" -ne 255 ]; then
+ return 0
+ elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
+ return 0
+ else
+ echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
+ return 1
+ fi
+}
+
+##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
+## Warning: This function only works for IPv4 at the moment.
+##params: ip, netmask
+function find_last_ip_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ IFS=. read -r m1 m2 m3 m4 <<< "$2"
+ IFS=. read -r s1 s2 s3 s4 <<< "$((i1 & m1)).$((i2 & m2)).$((i3 & m3)).$((i4 & m4))"
+ printf "%d.%d.%d.%d\n" "$((255 - $m1 + $s1))" "$((255 - $m2 + $s2))" "$((255 - $m3 + $s3))" "$((255 - $m4 + $s4 - 1))"
+}
+
##increments subnet by a value
##params: ip, value
##assumes low value
echo $baseaddr.$lsv
}
+##subtracts a value from an IP address
+##params: last ip, ip_count
+##assumes ip_count is less than the last octect of the address
+subtract_ip() {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ ip_count=$2
+ if [ $i4 -lt $ip_count ]; then
+ echo -e "\n\n${red}ERROR: Can't subtract $ip_count from IP address $1 Exiting${reset}\n\n"
+ exit 1
+ fi
+ printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 - $ip_count ))"
+}
+
##removes the network interface config from Vagrantfile
##params: interface
##assumes you are in the directory of Vagrantfile
ping_site=$2
shift 2
;;
+ -floating_ip_count)
+ floating_ip_count=$2
+ shift 2
+ ;;
*)
display_usage
exit 1
exit 1
fi
fi
+
+ if [ -z "$floating_ip_count" ]; then
+ floating_ip_count=20
+ fi
}
##disable selinux
##params: none
##usage: clean_tmp()
clean_tmp() {
- rm -rf /tmp/bgs_vagrant
+ rm -rf $vm_dir/foreman_vm
}
-##clone bgs vagrant version 1.0 using git
+##clone genesis and move to node vm dir
##params: none
##usage: clone_bgs
clone_bgs() {
cd /tmp/
+ rm -rf /tmp/genesis/
- ##will change this to be opnfv repo when commit is done
- if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git; then
- printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
+ ##clone artifacts and move into foreman_vm dir
+ if ! GIT_SSL_NO_VERIFY=true git clone https://gerrit.opnfv.org/gerrit/genesis.git; then
+ printf '%s\n' 'deploy.sh: Unable to clone genesis repo' >&2
exit 1
fi
+
+ mv -f /tmp/genesis/foreman/ci $vm_dir/foreman_vm
+ rm -rf /tmp/genesis/
}
##validates the network settings and update VagrantFile with network settings
##params: none
##usage: configure_network()
configure_network() {
- cd /tmp/bgs_vagrant
+ cd $vm_dir/foreman_vm
echo "${blue}Detecting network configuration...${reset}"
##detect host 1 or 3 interface configuration
public_subnet_mask=$subnet_mask
public_short_subnet_mask=$(find_short_netmask $interface)
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: $interface_ip_arr[2] ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
##set that interface to be public
sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
if_counter=1
subnet_mask=$(find_netmask $interface)
if [ "$if_counter" -eq 0 ]; then
admin_subnet_mask=$subnet_mask
+ if ! verify_subnet_size $admin_subnet_mask 5; then
+ echo "${red} Not enough IPs in admin subnet: ${interface_ip_arr[$if_counter]} ${admin_subnet_mask}. Need at least 5 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
elif [ "$if_counter" -eq 1 ]; then
private_subnet_mask=$subnet_mask
private_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $private_subnet_mask 15; then
+ echo "${red} Not enough IPs in private subnet: ${interface_ip_arr[$if_counter]} ${private_subnet_mask}. Need at least 15 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
elif [ "$if_counter" -eq 2 ]; then
public_subnet_mask=$subnet_mask
public_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: ${interface_ip_arr[$if_counter]} ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
elif [ "$if_counter" -eq 3 ]; then
storage_subnet_mask=$subnet_mask
+
+ if ! verify_subnet_size $storage_subnet_mask 10; then
+ echo "${red} Not enough IPs in storage subnet: ${interface_ip_arr[$if_counter]} ${storage_subnet_mask}. Need at least 10 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
else
echo "${red}ERROR: interface counter outside valid range of 0 to 3: $if_counter ! ${reset}"
exit 1
##replace foreman site
sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$foreman_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
##replace public vips
- ##no need to do this if virtual and no dhcp
- if [ ! -z "$enable_virtual_dhcp" ]; then
- next_public_ip=$(increment_ip $next_public_ip 10)
- else
+ ##no need to do this if no dhcp
+ if [[ -z "$enable_virtual_dhcp" && ! -z "$virtual" ]]; then
next_public_ip=$(next_usable_ip $next_public_ip)
+ else
+ next_public_ip=$(increment_ip $next_public_ip 10)
fi
public_output=$(grep -E '*public_vip' opnfv_ksgen_settings.yml)
##we have to define an allocation range of the public subnet to give
##to neutron to use as floating IPs
- ##we should control this subnet, so this range should work .150-200
- ##but generally this is a bad idea and we are assuming at least a /24 subnet here
##if static ip range, then we take the difference of the end range and current ip
## to be the allocation pool
+ ##if not static ip, we will use the last 20 IP from the subnet
+ ## note that this is not a really good idea because the subnet must be at least a /27 for this to work...
public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
if [ ! -z "$static_ip_range" ]; then
begin_octet=$(echo $next_public_ip | cut -d . -f4)
else
public_allocation_start=$(next_ip $next_public_ip)
public_allocation_end=$static_ip_range_end
- echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}"
fi
else
- public_allocation_start=$(increment_subnet $public_subnet 150)
- public_allocation_end=$(increment_subnet $public_subnet 200)
- echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}"
- echo "${blue}Foreman VM is up! ${reset}"
+ last_ip_subnet=$(find_last_ip_subnet $next_public_ip $public_subnet_mask)
+ public_allocation_start=$(subtract_ip $last_ip_subnet $floating_ip_count )
+ public_allocation_end=${last_ip_subnet}
fi
+ echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}"
sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
##stand up vagrant
if ! vagrant up; then
- printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
+ printf '%s\n' 'deploy.sh: Unable to complete Foreman VM install' >&2
exit 1
else
echo "${blue}Foreman VM is up! ${reset}"
compute_wait_completed=false
for node in ${nodes}; do
- cd /tmp
+ cd /tmp/
##remove VM nodes incase it wasn't cleaned up
- rm -rf /tmp/$node
+ rm -rf $vm_dir/$node
+ rm -rf /tmp/genesis/
- ##clone bgs vagrant
- ##will change this to be opnfv repo when commit is done
- if ! git clone https://github.com/trozet/bgs_vagrant.git $node; then
+ ##clone genesis and move into node folder
+ if ! GIT_SSL_NO_VERIFY=true git clone https://gerrit.opnfv.org/gerrit/genesis.git; then
printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
exit 1
fi
- cd $node
+ mv -f /tmp/genesis/foreman/ci $vm_dir/$node
+ rm -rf /tmp/genesis/
+
+ cd $vm_dir/$node
if [ $base_config ]; then
if ! cp -f $base_config opnfv_ksgen_settings.yml; then
echo "${blue} Waiting for puppet to complete on the nodes... ${reset}"
##check puppet is complete
##ssh into foreman server, run check to verify puppet is complete
- pushd /tmp/bgs_vagrant
+ pushd $vm_dir/foreman_vm
if ! vagrant ssh -c "/opt/khaleesi/run.sh --no-logs --use /vagrant/opnfv_ksgen_settings.yml /opt/khaleesi/playbooks/validate_opnfv-vm.yml"; then
echo "${red} Failed to validate puppet completion on nodes ${reset}"
exit 1
popd
##add routes back to nodes
for node in ${nodes}; do
- pushd /tmp/$node
+ pushd $vm_dir/$node
if ! vagrant ssh -c "route | grep default | grep $this_default_gw"; then
echo "${blue} Adding public route back to $node! ${reset}"
vagrant ssh -c "route add default gw $this_default_gw"
fi
}
+##check to make sure nodes are powered off
+##this function does nothing if virtual
+##params: none
+##usage: check_baremetal_nodes()
+check_baremetal_nodes() {
+ if [ $virtual ]; then
+ echo "${blue}Skipping Baremetal node power status check as deployment is virtual ${reset}"
+ else
+ echo "${blue}Checking Baremetal nodes power state... ${reset}"
+ if [ ! -z "$base_config" ]; then
+ # Install ipmitool
+ # Major version is pinned to force some consistency for Arno
+ if ! yum list installed | grep -i ipmitool; then
+ echo "${blue}Installing ipmitool...${reset}"
+ if ! yum -y install ipmitool-1*; then
+ echo "${red}Failed to install ipmitool!${reset}"
+ exit 1
+ fi
+ fi
+
+ ###find all the bmc IPs and number of nodes
+ node_counter=0
+ output=`grep bmc_ip $base_config | grep -Eo '[0-9]+.[0-9]+.[0-9]+.[0-9]+'`
+ for line in ${output} ; do
+ bmc_ip[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ max_nodes=$((node_counter-1))
+
+ ###find bmc_users per node
+ node_counter=0
+ output=`grep bmc_user $base_config | sed 's/\s*bmc_user:\s*//'`
+ for line in ${output} ; do
+ bmc_user[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ ###find bmc_pass per node
+ node_counter=0
+ output=`grep bmc_pass $base_config | sed 's/\s*bmc_pass:\s*//'`
+ for line in ${output} ; do
+ bmc_pass[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ for mynode in `seq 0 $max_nodes`; do
+ echo "${blue}Node: ${bmc_ip[$mynode]} ${bmc_user[$mynode]} ${bmc_pass[$mynode]} ${reset}"
+ ipmi_output=`ipmitool -I lanplus -P ${bmc_pass[$mynode]} -U ${bmc_user[$mynode]} -H ${bmc_ip[$mynode]} chassis status \
+ | grep "System Power" | cut -d ':' -f2 | tr -d [:blank:]`
+ if [ "$ipmi_output" == "on" ]; then
+ echo "${red}Error: Node is powered on: ${bmc_ip[$mynode]} ${reset}"
+ echo "${red}Please run clean.sh before running deploy! ${reset}"
+ exit 1
+ elif [ "$ipmi_output" == "off" ]; then
+ echo "${blue}Node: ${bmc_ip[$mynode]} is powered off${reset}"
+ else
+ echo "${red}Warning: Unable to detect node power state: ${bmc_ip[$mynode]} ${reset}"
+ fi
+ done
+ else
+ echo "${red}base_config was not provided for a baremetal install! Exiting${reset}"
+ exit 1
+ fi
+ fi
+}
+
##END FUNCTIONS
main() {
parse_cmdline "$@"
disable_selinux
+ check_baremetal_nodes
install_EPEL
install_vbox
install_ansible
install_vagrant
clean_tmp
+ verify_vm_dir
clone_bgs
configure_network
configure_virtual
Code Review / genesis.git / blobdiff