+#!/usr/bin/env bash
+
+#Deploy script to install provisioning server for Foreman/QuickStack
+#author: Tim Rozet (trozet@redhat.com)
+#
+#Uses Vagrant and VirtualBox
+#VagrantFile uses bootsrap.sh which Installs Khaleesi
+#Khaleesi will install and configure Foreman/QuickStack
+#
+#Pre-requisties:
+#Supports 3 or 4 network interface configuration
+#Target system must be RPM based
+#Ensure the host's kernel is up to date (yum update)
+#Provisioned nodes expected to have following order of network connections (note: not all have to exist, but order is maintained):
+#eth0- admin network
+#eth1- private network (+storage network in 3 NIC config)
+#eth2- public network
+#eth3- storage network
+#script assumes /24 subnet mask
+
+##VARS
+reset=`tput sgr0`
+blue=`tput setaf 4`
+red=`tput setaf 1`
+green=`tput setaf 2`
+
+declare -A interface_arr
+##END VARS
+
+##FUNCTIONS
+display_usage() {
+ echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
+ echo -e "\n${green}Make sure you have the latest kernel installed before running this script! (yum update kernel +reboot)${reset}\n"
+ echo -e "\nUsage:\n$0 [arguments] \n"
+ echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
+ echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n"
+ echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n"
+}
+
+##find ip of interface
+##params: interface name
+function find_ip {
+ ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
+}
+
+##finds subnet of ip and netmask
+##params: ip, netmask
+function find_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ IFS=. read -r m1 m2 m3 m4 <<< "$2"
+ printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
+}
+
+##increments subnet by a value
+##params: ip, value
+##assumes low value
+function increment_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
+}
+
+
+##finds netmask of interface
+##params: interface
+##returns long format 255.255.x.x
+function find_netmask {
+ ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
+}
+
+##finds short netmask of interface
+##params: interface
+##returns short format, ex: /21
+function find_short_netmask {
+ echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
+}
+
+##increments next IP
+##params: ip
+##assumes a /24 subnet
+function next_ip {
+ baseaddr="$(echo $1 | cut -d. -f1-3)"
+ lsv="$(echo $1 | cut -d. -f4)"
+ if [ "$lsv" -ge 254 ]; then
+ return 1
+ fi
+ ((lsv++))
+ echo $baseaddr.$lsv
+}
+
+##removes the network interface config from Vagrantfile
+##params: interface
+##assumes you are in the directory of Vagrantfile
+function remove_vagrant_network {
+ sed -i 's/^.*'"$1"'.*$//' Vagrantfile
+}
+
+##check if IP is in use
+##params: ip
+##ping ip to get arp entry, then check arp
+function is_ip_used {
+ ping -c 5 $1 > /dev/null 2>&1
+ arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
+}
+
+##find next usable IP
+##params: ip
+function next_usable_ip {
+ new_ip=$(next_ip $1)
+ while [ "$new_ip" ]; do
+ if ! is_ip_used $new_ip; then
+ echo $new_ip
+ return 0
+ fi
+ new_ip=$(next_ip $new_ip)
+ done
+ return 1
+}
+
+##increment ip by value
+##params: ip, amount to increment by
+##increment_ip $next_private_ip 10
+function increment_ip {
+ baseaddr="$(echo $1 | cut -d. -f1-3)"
+ lsv="$(echo $1 | cut -d. -f4)"
+ incrval=$2
+ lsv=$((lsv+incrval))
+ if [ "$lsv" -ge 254 ]; then
+ return 1
+ fi
+ echo $baseaddr.$lsv
+}
+
+##translates yaml into variables
+##params: filename, prefix (ex. "config_")
+##usage: parse_yaml opnfv_ksgen_settings.yml "config_"
+parse_yaml() {
+ local prefix=$2
+ local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
+ sed -ne "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
+ -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" $1 |
+ awk -F$fs '{
+ indent = length($1)/2;
+ vname[indent] = $2;
+ for (i in vname) {if (i > indent) {delete vname[i]}}
+ if (length($3) > 0) {
+ vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
+ printf("%s%s%s=\"%s\"\n", "'$prefix'",vn, $2, $3);
+ }
+ }'
+}
+
+##END FUNCTIONS
+
+if [[ ( $1 == "--help") || $1 == "-h" ]]; then
+ display_usage
+ exit 0
+fi
+
+echo -e "\n\n${blue}This script is used to deploy Foreman/QuickStack Installer and Provision OPNFV Target System${reset}\n\n"
+echo "Use -h to display help"
+sleep 2
+
+while [ "`echo $1 | cut -c1`" = "-" ]
+do
+ echo $1
+ case "$1" in
+ -base_config)
+ base_config=$2
+ shift 2
+ ;;
+ -no_parse)
+ no_parse="TRUE"
+ shift 1
+ ;;
+ -virtual)
+ virtual="TRUE"
+ shift 1
+ ;;
+ *)
+ display_usage
+ exit 1
+ ;;
+esac
+done
+
+##disable selinux
+/sbin/setenforce 0
+
+# Install EPEL repo for access to many other yum repos
+# Major version is pinned to force some consistency for Arno
+yum install -y epel-release-7*
+
+# Install other required packages
+# Major versions are pinned to force some consistency for Arno
+if ! yum install -y binutils-2* gcc-4* make-3* patch-2* libgomp-4* glibc-headers-2* glibc-devel-2* kernel-headers-3* kernel-devel-3* dkms-2* psmisc-22*; then
+ printf '%s\n' 'deploy.sh: Unable to install depdency packages' >&2
+ exit 1
+fi
+
+##install VirtualBox repo
+if cat /etc/*release | grep -i "Fedora release"; then
+ vboxurl=http://download.virtualbox.org/virtualbox/rpm/fedora/\$releasever/\$basearch
+else
+ vboxurl=http://download.virtualbox.org/virtualbox/rpm/el/\$releasever/\$basearch
+fi
+
+cat > /etc/yum.repos.d/virtualbox.repo << EOM
+[virtualbox]
+name=Oracle Linux / RHEL / CentOS-\$releasever / \$basearch - VirtualBox
+baseurl=$vboxurl
+enabled=1
+gpgcheck=1
+gpgkey=https://www.virtualbox.org/download/oracle_vbox.asc
+skip_if_unavailable = 1
+keepcache = 0
+EOM
+
+##install VirtualBox
+if ! yum list installed | grep -i virtualbox; then
+ if ! yum -y install VirtualBox-4.3; then
+ printf '%s\n' 'deploy.sh: Unable to install virtualbox package' >&2
+ exit 1
+ fi
+fi
+
+##install kmod-VirtualBox
+if ! lsmod | grep vboxdrv; then
+ sudo /etc/init.d/vboxdrv setup
+ if ! lsmod | grep vboxdrv; then
+ printf '%s\n' 'deploy.sh: Unable to install kernel module for virtualbox' >&2
+ exit 1
+ fi
+else
+ printf '%s\n' 'deploy.sh: Skipping kernel module for virtualbox. Already Installed'
+fi
+
+##install Ansible
+if ! yum list installed | grep -i ansible; then
+ if ! yum -y install ansible-1*; then
+ printf '%s\n' 'deploy.sh: Unable to install Ansible package' >&2
+ exit 1
+ fi
+fi
+
+##install Vagrant
+if ! rpm -qa | grep vagrant; then
+ if ! rpm -Uvh https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.2_x86_64.rpm; then
+ printf '%s\n' 'deploy.sh: Unable to install vagrant package' >&2
+ exit 1
+ fi
+else
+ printf '%s\n' 'deploy.sh: Skipping Vagrant install as it is already installed.'
+fi
+
+##add centos 7 box to vagrant
+if ! vagrant box list | grep chef/centos-7.0; then
+ if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
+ printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
+ exit 1
+ fi
+else
+ printf '%s\n' 'deploy.sh: Skipping Vagrant box add as centos-7.0 is already installed.'
+fi
+
+##install workaround for centos7
+if ! vagrant plugin list | grep vagrant-centos7_fix; then
+ if ! vagrant plugin install vagrant-centos7_fix; then
+ printf '%s\n' 'deploy.sh: Warning: unable to install vagrant centos7 workaround' >&2
+ fi
+else
+ printf '%s\n' 'deploy.sh: Skipping Vagrant plugin as centos7 workaround is already installed.'
+fi
+
+cd /tmp/
+
+##remove bgs vagrant incase it wasn't cleaned up
+rm -rf /tmp/bgs_vagrant
+
+##clone bgs vagrant
+##will change this to be opnfv repo when commit is done
+if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git; then
+ printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
+ exit 1
+fi
+
+cd bgs_vagrant
+
+echo "${blue}Detecting network configuration...${reset}"
+##detect host 1 or 3 interface configuration
+#output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
+output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
+
+if [ ! "$output" ]; then
+ printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
+ exit 1
+fi
+
+##find number of interfaces with ip and substitute in VagrantFile
+if_counter=0
+for interface in ${output}; do
+
+ if [ "$if_counter" -ge 4 ]; then
+ break
+ fi
+ interface_ip=$(find_ip $interface)
+ if [ ! "$interface_ip" ]; then
+ continue
+ fi
+ new_ip=$(next_usable_ip $interface_ip)
+ if [ ! "$new_ip" ]; then
+ continue
+ fi
+ interface_arr[$interface]=$if_counter
+ interface_ip_arr[$if_counter]=$new_ip
+ subnet_mask=$(find_netmask $interface)
+ if [ "$if_counter" -eq 1 ]; then
+ private_subnet_mask=$subnet_mask
+ private_short_subnet_mask=$(find_short_netmask $interface)
+ fi
+ if [ "$if_counter" -eq 2 ]; then
+ public_subnet_mask=$subnet_mask
+ public_short_subnet_mask=$(find_short_netmask $interface)
+ fi
+ if [ "$if_counter" -eq 3 ]; then
+ storage_subnet_mask=$subnet_mask
+ fi
+ sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
+ ((if_counter++))
+done
+
+##now remove interface config in Vagrantfile for 1 node
+##if 1, 3, or 4 interfaces set deployment type
+##if 2 interfaces remove 2nd interface and set deployment type
+if [ "$if_counter" == 1 ]; then
+ deployment_type="single_network"
+ remove_vagrant_network eth_replace1
+ remove_vagrant_network eth_replace2
+ remove_vagrant_network eth_replace3
+elif [ "$if_counter" == 2 ]; then
+ deployment_type="single_network"
+ second_interface=`echo $output | awk '{print $2}'`
+ remove_vagrant_network $second_interface
+ remove_vagrant_network eth_replace2
+elif [ "$if_counter" == 3 ]; then
+ deployment_type="three_network"
+ remove_vagrant_network eth_replace3
+else
+ deployment_type="multi_network"
+fi
+
+echo "${blue}Network detected: ${deployment_type}! ${reset}"
+
+if route | grep default; then
+ echo "${blue}Default Gateway Detected ${reset}"
+ host_default_gw=$(ip route | grep default | awk '{print $3}')
+ echo "${blue}Default Gateway: $host_default_gw ${reset}"
+ default_gw_interface=$(ip route get $host_default_gw | awk '{print $3}')
+ case "${interface_arr[$default_gw_interface]}" in
+ 0)
+ echo "${blue}Default Gateway Detected on Admin Interface!${reset}"
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
+ node_default_gw=$host_default_gw
+ ;;
+ 1)
+ echo "${red}Default Gateway Detected on Private Interface!${reset}"
+ echo "${red}Private subnet should be private and not have Internet access!${reset}"
+ exit 1
+ ;;
+ 2)
+ echo "${blue}Default Gateway Detected on Public Interface!${reset}"
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
+ echo "${blue}Will setup NAT from Admin -> Public Network on VM!${reset}"
+ sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
+ echo "${blue}Setting node gateway to be VM Admin IP${reset}"
+ node_default_gw=${interface_ip_arr[0]}
+ public_gateway=$default_gw
+ ;;
+ 3)
+ echo "${red}Default Gateway Detected on Storage Interface!${reset}"
+ echo "${red}Storage subnet should be private and not have Internet access!${reset}"
+ exit 1
+ ;;
+ *)
+ echo "${red}Unable to determine which interface default gateway is on..Exiting!${reset}"
+ exit 1
+ ;;
+ esac
+else
+ #assumes 24 bit mask
+ defaultgw=`echo ${interface_ip_arr[0]} | cut -d. -f1-3`
+ firstip=.1
+ defaultgw=$defaultgw$firstip
+ echo "${blue}Unable to find default gateway. Assuming it is $defaultgw ${reset}"
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
+ node_default_gw=$defaultgw
+fi
+
+if [ $base_config ]; then
+ if ! cp -f $base_config opnfv_ksgen_settings.yml; then
+ echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
+ exit 1
+ fi
+fi
+
+if [ $no_parse ]; then
+echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
+
+else
+
+echo "${blue}Gathering network parameters for Target System...this may take a few minutes${reset}"
+##Edit the ksgen settings appropriately
+##ksgen settings will be stored in /vagrant on the vagrant machine
+##if single node deployment all the variables will have the same ip
+##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
+
+sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
+
+##replace private interface parameter
+##private interface will be of hosts, so we need to know the provisioned host interface name
+##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
+##replace IP for parameters with next IP that will be given to controller
+if [ "$deployment_type" == "single_network" ]; then
+ ##we also need to assign IP addresses to nodes
+ ##for single node, foreman is managing the single network, so we can't reserve them
+ ##not supporting single network anymore for now
+ echo "{blue}Single Network type is unsupported right now. Please check your interface configuration. Exiting. ${reset}"
+ exit 0
+
+elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
+
+ if [ "$deployment_type" == "three_network" ]; then
+ sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
+ fi
+
+ sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
+
+ ##get ip addresses for private network on controllers to make dhcp entries
+ ##required for controllers_ip_array global param
+ next_private_ip=${interface_ip_arr[1]}
+ type=_private
+ for node in controller1 controller2 controller3; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
+ exit 1
+ fi
+ sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ controller_ip_array=$controller_ip_array$next_private_ip,
+ done
+
+ ##replace global param for contollers_ip_array
+ controller_ip_array=${controller_ip_array%?}
+ sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
+
+ ##now replace all the VIP variables. admin//private can be the same IP
+ ##we have to use IP's here that won't be allocated to hosts at provisioning time
+ ##therefore we increment the ip by 10 to make sure we have a safe buffer
+ next_private_ip=$(increment_ip $next_private_ip 10)
+
+ grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
+ exit 1
+ fi
+ done
+
+ ##replace foreman site
+ next_public_ip=${interface_ip_arr[2]}
+ sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
+ ##replace public vips
+ next_public_ip=$(increment_ip $next_public_ip 10)
+ grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ if [ ! "$next_public_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
+ exit 1
+ fi
+ done
+
+ ##replace public_network param
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ ##replace private_network param
+ private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
+ sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ ##replace storage_network
+ if [ "$deployment_type" == "three_network" ]; then
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ next_storage_ip=${interface_ip_arr[3]}
+ storage_subnet=$(find_subnet $next_storage_ip $storage_subnet_mask)
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $storage_subnet"'/' opnfv_ksgen_settings.yml
+ fi
+
+ ##replace public_subnet param
+ public_subnet=$public_subnet'\'$public_short_subnet_mask
+ sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ ##replace private_subnet param
+ private_subnet=$private_subnet'\'$private_short_subnet_mask
+ sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+
+ ##replace public_dns param to be foreman server
+ sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
+
+ ##replace public_gateway
+ if [ -z "$public_gateway" ]; then
+ ##if unset then we assume its the first IP in the public subnet
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ public_gateway=$(increment_subnet $public_subnet 1)
+ fi
+ sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
+
+ ##we have to define an allocation range of the public subnet to give
+ ##to neutron to use as floating IPs
+ ##we should control this subnet, so this range should work .150-200
+ ##but generally this is a bad idea and we are assuming at least a /24 subnet here
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ public_allocation_start=$(increment_subnet $public_subnet 150)
+ public_allocation_end=$(increment_subnet $public_subnet 200)
+
+ sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
+ sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
+
+else
+ printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
+ exit 1
+fi
+
+echo "${blue}Parameters Complete. Settings have been set for Foreman. ${reset}"
+
+fi
+
+if [ $virtual ]; then
+ echo "${blue} Virtual flag detected, setting Khaleesi playbook to be opnfv-vm.yml ${reset}"
+ sed -i 's/opnfv.yml/opnfv-vm.yml/' bootstrap.sh
+fi
+
+echo "${blue}Starting Vagrant! ${reset}"
+
+##stand up vagrant
+if ! vagrant up; then
+ printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
+ exit 1
+else
+ echo "${blue}Foreman VM is up! ${reset}"
+fi
+
+if [ $virtual ]; then
+
+##Bring up VM nodes
+echo "${blue}Setting VMs up... ${reset}"
+nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+##due to ODL Helium bug of OVS connecting to ODL too early, we need controllers to install first
+##this is fix kind of assumes more than I would like to, but for now it should be OK as we always have
+##3 static controllers
+compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
+controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+nodes=${controller_nodes}${compute_nodes}
+
+for node in ${nodes}; do
+ cd /tmp
+
+ ##remove VM nodes incase it wasn't cleaned up
+ rm -rf /tmp/$node
+
+ ##clone bgs vagrant
+ ##will change this to be opnfv repo when commit is done
+ if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git $node; then
+ printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
+ exit 1
+ fi
+
+ cd $node
+
+ if [ $base_config ]; then
+ if ! cp -f $base_config opnfv_ksgen_settings.yml; then
+ echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
+ exit 1
+ fi
+ fi
+
+ ##parse yaml into variables
+ eval $(parse_yaml opnfv_ksgen_settings.yml "config_")
+ ##find node type
+ node_type=config_nodes_${node}_type
+ node_type=$(eval echo \$$node_type)
+
+ ##find number of interfaces with ip and substitute in VagrantFile
+ output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
+
+ if [ ! "$output" ]; then
+ printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
+ exit 1
+ fi
+
+
+ if_counter=0
+ for interface in ${output}; do
+
+ if [ "$if_counter" -ge 4 ]; then
+ break
+ fi
+ interface_ip=$(find_ip $interface)
+ if [ ! "$interface_ip" ]; then
+ continue
+ fi
+ case "${if_counter}" in
+ 0)
+ mac_string=config_nodes_${node}_mac_address
+ mac_addr=$(eval echo \$$mac_string)
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find mac_address for $node! ${reset}"
+ exit 1
+ fi
+ ;;
+ 1)
+ if [ "$node_type" == "controller" ]; then
+ mac_string=config_nodes_${node}_private_mac
+ mac_addr=$(eval echo \$$mac_string)
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find private_mac for $node! ${reset}"
+ exit 1
+ fi
+ else
+ ##generate random mac
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ fi
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ ;;
+ *)
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ ;;
+ esac
+ sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
+ ((if_counter++))
+ done
+
+ ##now remove interface config in Vagrantfile for 1 node
+ ##if 1, 3, or 4 interfaces set deployment type
+ ##if 2 interfaces remove 2nd interface and set deployment type
+ if [ "$if_counter" == 1 ]; then
+ deployment_type="single_network"
+ remove_vagrant_network eth_replace1
+ remove_vagrant_network eth_replace2
+ remove_vagrant_network eth_replace3
+ elif [ "$if_counter" == 2 ]; then
+ deployment_type="single_network"
+ second_interface=`echo $output | awk '{print $2}'`
+ remove_vagrant_network $second_interface
+ remove_vagrant_network eth_replace2
+ elif [ "$if_counter" == 3 ]; then
+ deployment_type="three_network"
+ remove_vagrant_network eth_replace3
+ else
+ deployment_type="multi_network"
+ fi
+
+ ##modify provisioning to do puppet install, config, and foreman check-in
+ ##substitute host_name and dns_server in the provisioning script
+ host_string=config_nodes_${node}_hostname
+ host_name=$(eval echo \$$host_string)
+ sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh
+ ##dns server should be the foreman server
+ sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh
+
+ ## remove bootstrap and NAT provisioning
+ sed -i '/nat_setup.sh/d' Vagrantfile
+ sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile
+
+ ## modify default_gw to be node_default_gw
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile
+
+ ## modify VM memory to be 4gig
+ sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile
+
+ echo "${blue}Starting Vagrant Node $node! ${reset}"
+
+ ##stand up vagrant
+ if ! vagrant up; then
+ echo "${red} Unable to start $node ${reset}"
+ exit 1
+ else
+ echo "${blue} $node VM is up! ${reset}"
+ fi
+
+done
+
+ echo "${blue} All VMs are UP! ${reset}"
+
+fi
Code Review / genesis.git / blobdiff