cluster_sync_timeout=1800
-if pcs status 2>&1 | grep -E '(cluster is not currently running)|(OFFLINE:)'; then
- echo_error "ERROR: upgrade cannot start with some cluster nodes being offline"
- exit 1
+check_cluster
+check_pcsd
+if [[ -n $(is_bootstrap_node) ]]; then
+ check_clean_cluster
fi
-
+check_python_rpm
+check_galera_root_password
+check_disk_for_mysql_dump
# We want to disable fencing during the cluster --stop as it might fence
# nodes where a service fails to stop, which could be fatal during an upgrade
STONITH_STATE=$(pcs property show stonith-enabled | grep "stonith-enabled" | awk '{ print $2 }')
pcs property set stonith-enabled=false
-# If for some reason rpm-python are missing we want to error out early enough
-if [ ! rpm -q rpm-python &> /dev/null ]; then
- echo_error "ERROR: upgrade cannot start without rpm-python installed"
- exit 1
+# Migrate to HA NG
+if [[ -n $(is_bootstrap_node) ]]; then
+ migrate_full_to_ng_ha
fi
+# After migrating the cluster to HA-NG the services not under pacemaker's control
+# are still up and running. We need to stop them explicitely otherwise during the yum
+# upgrade the rpm %post sections will try to do a systemctl try-restart <service>, which
+# is going to take a long time because rabbit is down. By having the service stopped
+# systemctl try-restart is a noop
+
+for service in $(services_to_migrate); do
+ manage_systemd_service stop "${service%%-clone}"
+ # So the reason for not reusing check_resource_systemd is that
+ # I have observed systemctl is-active returning unknown with at least
+ # one service that was stopped (See LP 1627254)
+ timeout=600
+ tstart=$(date +%s)
+ tend=$(( $tstart + $timeout ))
+ check_interval=3
+ while (( $(date +%s) < $tend )); do
+ if [[ "$(systemctl is-active ${service%%-clone})" = "active" ]]; then
+ echo "$service still active, sleeping $check_interval seconds."
+ sleep $check_interval
+ else
+ # we do not care if it is inactive, unknown or failed as long as it is
+ # not running
+ break
+ fi
+
+ done
+done
+
# In case the mysql package is updated, the database on disk must be
# upgraded as well. This typically needs to happen during major
# version upgrades (e.g. 5.5 -> 5.6, 5.5 -> 10.1...)
# on mysql package versionning, but this can be overriden manually
# to support specific upgrade scenario
-# Where to backup current database if mysql need to be upgraded
-MYSQL_BACKUP_DIR=/var/tmp/mysql_upgrade_osp
-MYSQL_TEMP_UPGRADE_BACKUP_DIR=/var/lib/mysql-temp-upgrade-backup
-# Spare disk ratio for extra safety
-MYSQL_BACKUP_SIZE_RATIO=1.2
-
-# Shall we upgrade mysql data directory during the stack upgrade?
-if [ "$mariadb_do_major_upgrade" = "auto" ]; then
- ret=$(is_mysql_upgrade_needed)
- if [ $ret = "1" ]; then
- DO_MYSQL_UPGRADE=1
- else
- DO_MYSQL_UPGRADE=0
- fi
- echo "mysql upgrade required: $DO_MYSQL_UPGRADE"
-elif [ "$mariadb_do_major_upgrade" = 0 ]; then
- DO_MYSQL_UPGRADE=0
-else
- DO_MYSQL_UPGRADE=1
-fi
-
-if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
+if [[ -n $(is_bootstrap_node) ]]; then
if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- if [ -d "$MYSQL_BACKUP_DIR" ]; then
- echo_error "Error: $MYSQL_BACKUP_DIR exists already. Likely an upgrade failed previously"
- exit 1
- fi
- mkdir "$MYSQL_BACKUP_DIR"
- if [ $? -ne 0 ]; then
- echo_error "Error: could not create temporary backup directory $MYSQL_BACKUP_DIR"
- exit 1
- fi
-
- # the /root/.my.cnf is needed because we set the mysql root
- # password from liberty onwards
- backup_flags="--defaults-extra-file=/root/.my.cnf -u root --flush-privileges --all-databases --single-transaction"
- # While not ideal, this step allows us to calculate exactly how much space the dump
- # will need. Our main goal here is avoiding any chance of corruption due to disk space
- # exhaustion
- backup_size=$(mysqldump $backup_flags 2>/dev/null | wc -c)
- database_size=$(du -cb /var/lib/mysql | tail -1 | awk '{ print $1 }')
- free_space=$(df -B1 --output=avail "$MYSQL_BACKUP_DIR" | tail -1)
-
- # we need at least space for a new mysql database + dump of the existing one,
- # times a small factor for additional safety room
- # note: bash doesn't do floating point math or floats in if statements,
- # so use python to apply the ratio and cast it back to integer
- required_space=$(python -c "from __future__ import print_function; print(\"%d\" % int((($database_size + $backup_size) * $MYSQL_BACKUP_SIZE_RATIO)))")
- if [ $required_space -ge $free_space ]; then
- echo_error "Error: not enough free space in $MYSQL_BACKUP_DIR ($required_space bytes required)"
- exit 1
- fi
-
mysqldump $backup_flags > "$MYSQL_BACKUP_DIR/openstack_database.sql"
cp -rdp /etc/my.cnf* "$MYSQL_BACKUP_DIR"
fi
- pcs resource disable httpd
- check_resource httpd stopped 1800
- pcs resource disable openstack-core
- check_resource openstack-core stopped 1800
pcs resource disable redis
check_resource redis stopped 600
- pcs resource disable mongod
- check_resource mongod stopped 600
pcs resource disable rabbitmq
check_resource rabbitmq stopped 600
- pcs resource disable memcached
- check_resource memcached stopped 600
pcs resource disable galera
check_resource galera stopped 600
+ pcs resource disable openstack-cinder-volume
+ check_resource openstack-cinder-volume stopped 600
# Disable all VIPs before stopping the cluster, so that pcs doesn't use one as a source address:
# https://bugzilla.redhat.com/show_bug.cgi?id=1330688
for vip in $(pcs resource show | grep ocf::heartbeat:IPaddr2 | grep Started | awk '{ print $1 }'); do
pcs cluster stop --all
fi
-# Swift isn't controled by pacemaker
+
+# Swift isn't controlled by pacemaker
systemctl_swift stop
tstart=$(date +%s)
wsrep_cluster_address = gcomm://localhost
EOF
-if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
- if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- # Scripts run via heat have no HOME variable set and this confuses
- # mysqladmin
- export HOME=/root
- mkdir /var/lib/mysql || /bin/true
- chown mysql:mysql /var/lib/mysql
- chmod 0755 /var/lib/mysql
- restorecon -R /var/lib/mysql/
- mysql_install_db --datadir=/var/lib/mysql --user=mysql
- chown -R mysql:mysql /var/lib/mysql/
+if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
+ # Scripts run via heat have no HOME variable set and this confuses
+ # mysqladmin
+ export HOME=/root
+
+ mkdir /var/lib/mysql || /bin/true
+ chown mysql:mysql /var/lib/mysql
+ chmod 0755 /var/lib/mysql
+ restorecon -R /var/lib/mysql/
+ mysql_install_db --datadir=/var/lib/mysql --user=mysql
+ chown -R mysql:mysql /var/lib/mysql/
+
+ if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
mysqld_safe --wsrep-new-cluster &
# We have a populated /root/.my.cnf with root/password here so
# we need to temporarily rename it because the newly created
# If we reached here without error we can safely blow away the origin
# mysql dir from every controller
+
+# TODO: What if the upgrade fails on the bootstrap node, but not on
+# this controller. Data may be lost.
if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
rm -r $MYSQL_TEMP_UPGRADE_BACKUP_DIR
fi
crudini --set /etc/swift/proxy-server.conf pipeline:main pipeline "catch_errors healthcheck cache ratelimit tempurl formpost authtoken keystone staticweb proxy-logging proxy-server"
# LP: 1615035, required only for M/N upgrade.
crudini --set /etc/nova/nova.conf DEFAULT scheduler_host_manager host_manager
+# LP: 1627450, required only for M/N upgrade
+crudini --set /etc/nova/nova.conf DEFAULT scheduler_driver filter_scheduler
+
+crudini --set /etc/sahara/sahara.conf DEFAULT plugins ambari,cdh,mapr,vanilla,spark,storm
Code Review / apex-tripleo-heat-templates.git / blobdiff