+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
=========================
OPNFV FUNCTEST user guide
=========================
.. toctree::
- :numbered:
:maxdepth: 2
Introduction
============
-The goal of this documents is to describe the Functest test cases as well as
-provide a procedure about how to execute (or launch) them.
-
-A presentation has been created for the first OPNFV Summit `[4]`_.
-
-It is assumed that Functest container has been properly installed `[1]`_.
-
-.. include:: ./description.rst
-
-The different scenarios are described in the section hereafter.
-
-VIM
----
-
-vPing
-^^^^^
-
-The goal of this test can be described as follows::
-
- vPing test case
- +-------------+ +-------------+
- | | | |
- | | Boot VM1 | |
- | +------------------>| |
- | | | |
- | | Get IP VM1 | |
- | +------------------>| |
- | Tester | | System |
- | | Boot VM2 | Under |
- | +------------------>| Test |
- | | | |
- | | Create (VM2) | |
- | | floating IP | |
- | +------------------>| |
- | | | |
- | | SCP vPing script | |
- | | to VM2 | |
- | +------------------>| |
- | | | |
- | | SSH to VM2 | |
- | +------------------>| |
- | | | |
- | | Ping VM1 | |
- | | private IP | |
- | +------------------>| |
- | | | |
- | | If ping: | |
- | | exit OK | |
- | | else (timeout) | |
- | | exit KO | |
- | | | |
- +-------------+ +-------------+
-
-This example can be considered as an "Hello World" example.
-It is the first basic example, it must work on any configuration.
+The goal of this document is to describe the OPNFV Functest test cases and to
+provide a procedure to execute them. In the OPNFV Colorado system release,
+a Functest CLI utility is introduced for easier execution of test procedures.
+
+An overview presentation has been created for the first OPNFV Summit `[4]`_.
+
+This document is a continuation of the OPNFV Functest Configuration Guide `[1]`_.
+
+**IMPORTANT**: It is assumed here that the Functest Docker container is already
+properly deployed and that all instructions described in this guide are to be
+performed from *inside* the deployed Functest Docker container.
+
+.. include:: ./introduction.rst
+
+The different test cases are described in the remaining sections of this document.
+
+VIM (Virtualized Infrastructure Manager)
+----------------------------------------
+
+Healthcheck
+^^^^^^^^^^^
+In Colorado release a new Tier 'healthcheck' with one testcase 'healthcheck'
+is introduced. The healthcheck testcase verifies that some basic IP connectivity
+and essential operations of OpenStack functionality over the command line are
+working correctly.
+
+In particular, the following verifications are performed:
+
+ * DHCP agent functionality for IP address allocation
+ * Openstack Authentication management functionality via the Keystone API
+ * OpenStack Image management functionality via the Glance API
+ * OpenStack Block Storage management functionality via the Cinder API
+ * OpenStack Networking management functionality via the Neutron API
+ * Openstack Compute management functionality via the NOVA API
+
+Self-obviously, successful completion of the 'healthcheck' testcase is a
+necessary pre-requisite for the execution of all other test Tiers.
+
+
+vPing_ssh
+^^^^^^^^^
+
+Given the script **ping.sh**::
+
+ #!/bin/sh
+ while true; do
+ ping -c 1 $1 2>&1 >/dev/null
+ RES=$?
+ if [ "Z$RES" = "Z0" ] ; then
+ echo 'vPing OK'
+ break
+ else
+ echo 'vPing KO'
+ fi
+ sleep 1
+ done
+
+
+The goal of this test is to establish an SSH connection using a floating IP
+on the Public/External network and verify that 2 instances can talk over a Private
+Tenant network::
+
+ vPing_ssh test case
+ +-------------+ +-------------+
+ | | | |
+ | | Boot VM1 with IP1 | |
+ | +------------------->| |
+ | Tester | | System |
+ | | Boot VM2 | Under |
+ | +------------------->| Test |
+ | | | |
+ | | Create floating IP | |
+ | +------------------->| |
+ | | | |
+ | | Assign floating IP | |
+ | | to VM2 | |
+ | +------------------->| |
+ | | | |
+ | | Establish SSH | |
+ | | connection to VM2 | |
+ | | through floating IP| |
+ | +------------------->| |
+ | | | |
+ | | SCP ping.sh to VM2 | |
+ | +------------------->| |
+ | | | |
+ | | VM2 executes | |
+ | | ping.sh to VM1 | |
+ | +------------------->| |
+ | | | |
+ | | If ping: | |
+ | | exit OK | |
+ | | else (timeout): | |
+ | | exit Failed | |
+ | | | |
+ +-------------+ +-------------+
+
+This test can be considered as an "Hello World" example.
+It is the first basic use case which **must** work on any deployment.
vPing_userdata
^^^^^^^^^^^^^^
-The goal of this test can be described as follow::
+This test case is similar to vPing_ssh but without the use of Floating IPs
+and the Public/External network to transfer the ping script.
+Instead, it uses Nova metadata service to pass it to the instance at booting time.
+As vPing_ssh, it checks that 2 instances can talk to
+each other on a Private Tenant network::
vPing_userdata test case
- +-------------+ +-------------+
- | | | |
- | | Boot VM1 | |
- | +------------------>| |
- | | | |
- | | Get IP VM1 | |
- | +------------------>| |
- | Tester | | System |
- | | Boot VM2 | Under |
- | +------------------>| Test |
- | | VM2 pings VM1 | |
- | | (cloud-init) | |
- | | Check console log | |
- | | If ping: | |
- | | exit OK | |
- | | else (timeout) | |
- | | exit KO | |
- | | | |
- +-------------+ +-------------+
-
-This scenario is similar to the previous one but it uses cloud-init (nova
-metadata service) instead of floating IPs and SSH.
+ +-------------+ +-------------+
+ | | | |
+ | | Boot VM1 with IP1 | |
+ | +------------------->| |
+ | | | |
+ | | Boot VM2 with | |
+ | | ping.sh as userdata| |
+ | | with IP1 as $1. | |
+ | +------------------->| |
+ | Tester | | System |
+ | | VM2 exeutes ping.sh| Under |
+ | | (ping IP1) | Test |
+ | +------------------->| |
+ | | | |
+ | | Monitor nova | |
+ | | console-log VM 2 | |
+ | | If ping: | |
+ | | exit OK | |
+ | | else (timeout) | |
+ | | exit Failed | |
+ | | | |
+ +-------------+ +-------------+
+
+When the second VM boots it will execute the script passed as userdata
+automatically. The ping will be detected by periodically capturing the output
+in the console-log of the second VM.
Tempest
Tempest `[2]`_ is the reference OpenStack Integration test suite.
It is a set of integration tests to be run against a live OpenStack cluster.
-Tempest has batteries of tests for:
+Tempest has suites of tests for:
* OpenStack API validation
* Scenarios
* Other specific tests useful in validating an OpenStack deployment
-We use Rally `[3]`_ to run Tempest suite.
-Rally generates automatically tempest.conf configuration file.
-Before running actual test cases Functest creates needed resources.
-Needed parameters are updated in the configuration file.
-When the Tempest suite is run, each test duration is measured.
-The full console output is stored in the tempest.log file.
+Functest uses Rally `[3]`_ to run the Tempest suite.
+Rally generates automatically the Tempest configuration file **tempest.conf**.
+Before running the actual test cases,
+Functest creates the needed resources (user, tenant) and
+updates the appropriate parameters into the configuration file.
-As an addition of Arno, Brahmaputra runs a customized set of Tempest test cases.
-The list is specificed through *--tests-file* when running Rally.
-This option has been introduced in Rally in version 0.1.2.
+When the Tempest suite is executed, each test duration is measured and the full
+console output is stored to a *log* file for further analysis.
-The customized test list is available in the Functest repo `[4]`_.
-This list contains more than 200 Tempest test cases.
-The list can be divied into two main parts:
+The Tempest testcases are distributed accross two
+Tiers:
- 1) Set of tempest smoke test cases
- 2) Set of test cases from DefCore list `[8]`_
+ * Smoke Tier - Test Case 'tempest_smoke_serial'
+ * Openstack Tier - Test case 'tempest_full_parallel'
-The goal of Tempest test suite is to check the basic functionalities of
-different OpenStack components on an OPNFV fresh installation using
+NOTE: Test case 'tempest_smoke_serial' executes a defined set of tempest smoke
+tests with a single thread (i.e. serial mode). Test case 'tempest_full_parallel'
+executes all defined Tempest tests using several concurrent threads
+(i.e. parallel mode). The number of threads activated corresponds to the number
+of available logical CPUs.
+
+The goal of the Tempest test suite is to check the basic functionalities of the
+different OpenStack components on an OPNFV fresh installation, using the
corresponding REST API interfaces.
Rally bench test suites
^^^^^^^^^^^^^^^^^^^^^^^
-Rally `[3]`_ is a benchmarking tool that answers the question::
+Rally `[3]`_ is a benchmarking tool that answers the question:
- “How does OpenStack work at scale?”.
+*How does OpenStack work at scale?*
-The goal of this test suite is to test the different modules of OpenStack and
-get significant figures that could help us to define telco Cloud KPI.
+The goal of this test suite is to benchmark all the different OpenStack modules and
+get significant figures that could help to define Telco Cloud KPIs.
-The OPNFV scenarios are based on the collection of the existing Rally scenarios:
+The OPNFV Rally scenarios are based on the collection of the actual Rally scenarios:
* authenticate
* cinder
* quotas
* requests
-Basic SLA (stop test on errors) have been implemented.
+A basic SLA (stop test on errors) has been implemented.
+
+The Rally testcases are distributed accross two Tiers:
+
+ * Smoke Tier - Test Case 'rally_sanity'
+ * Openstack Tier - Test case 'rally_full'
+
+NOTE: Test case 'rally_sanity' executes a limited number of Rally smoke test
+cases. Test case 'rally_full' executes the full defined set of Rally tests.
SDN Controllers
---------------
-Brahmaputra introduces new SDN controllers.
-There are currently 3 possible controllers:
+There are currently 2 available controllers:
* OpenDaylight (ODL)
* ONOS
- * OpenContrail (OCL)
OpenDaylight
^^^^^^^^^^^^
The OpenDaylight (ODL) test suite consists of a set of basic tests inherited
-from ODL project.
+from the ODL project using the Robot `[11]`_ framework.
The suite verifies creation and deletion of networks, subnets and ports with
OpenDaylight and Neutron.
-The list of tests can be described as follow:
+The list of tests can be described as follows:
- * Restconf.basic: Get the controller modules via Restconf
- * Neutron.Networks
+ * Basic Restconf test cases
+ * Connect to Restconf URL
+ * Check the HTTP code status
- * Check OpenStack Networks :: Checking OpenStack Neutron for known networks
- * Check OpenDaylight Networks :: Checking OpenDaylight Neutron API
- * Create Network :: Create new network in OpenStack
- * Check Network :: Check Network created in OpenDaylight
- * Neutron.Networks :: Checking Network created in OpenStack are pushed
+ * Neutron Reachability test cases
+ * Get the complete list of neutron resources (networks, subnets, ports)
- * Neutron.Subnets
+ * Neutron Network test cases
+ * Check OpenStack networks
+ * Check OpenDaylight networks
+ * Create a new network via OpenStack and check the HTTP status code returned by Neutron
+ * Check that the network has also been successfully created in OpenDaylight
- * Check OpenStack Subnets :: Checking OpenStack Neutron for known Subnets
- * Check OpenDaylight subnets :: Checking OpenDaylight Neutron API
- * Create New subnet :: Create new subnet in OpenStack
- * Check New subnet :: Check new subnet created in OpenDaylight
- * Neutron.Subnets :: Checking Subnets created in OpenStack are pushed
+ * Neutron Subnet test cases
+ * Check OpenStack subnets
+ * Check OpenDaylight subnets
+ * Create a new subnet via OpenStack and check the HTTP status code returned by Neutron
+ * Check that the subnet has also been successfully created in OpenDaylight
- * Neutron.Ports
+ * Neutron Port test cases
+ * Check OpenStack Neutron for known ports
+ * Check OpenDaylight ports
+ * Create a new port via OpenStack and check the HTTP status code returned by Neutron
+ * Check that the new port has also been successfully created in OpenDaylight
- * Check OpenStack ports :: Checking OpenStack Neutron for known ports
- * Check OpenDaylight ports :: Checking OpenDaylight Neutron API
- * Create New Port :: Create new port in OpenStack
- * Check New Port :: Check new subnet created in OpenDaylight
- * Neutron.Ports :: Checking Port created in OpenStack are pushed
+ * Delete operations
+ * Delete the port previously created via OpenStack
+ * Check that the port has been also succesfully deleted in OpenDaylight
+ * Delete previously subnet created via OpenStack
+ * Check that the subnet has also been successfully deleted in OpenDaylight
+ * Delete the network created via OpenStack
+ * Check that the network has also been succesfully deleted in OpenDaylight
- * Delete Ports
-
- * Delete previously created subnet in OpenStack
- * Check subnet deleted in OpenDaylight
- * Check subnet deleted in OpenStack
-
- * Delete network
-
- * Delete previously created network in OpenStack
- * Check network deleted in OpenDaylight
- * Check network deleted in OpenStack
+Note: the checks in OpenDaylight are based on the returned HTTP status
+code returned by OpenDaylight.
ONOS
^^^^
-TestON Framework is used to test ONOS function.
+TestON Framework is used to test the ONOS SDN controller functions.
The test cases deal with L2 and L3 functions.
-ONOS is configured through OPNFV scenario.
The ONOS test suite can be run on any ONOS compliant scenario.
-The test cases may be described as follow:
+The test cases are described as follows:
- * onosfunctest: The mainly executable file contains the initialization of
+ * onosfunctest: The main executable file contains the initialization of
the docker environment and functions called by FUNCvirNetNB and
FUNCvirNetNBL3
* FUNCvirNetNBL3
- * Create Router: Post dataes for create Router and check it in ONOS
+ * Create Router: Post data for create Router and check it in ONOS
* Update Router: Update the Router and compare it in ONOS
- * Delete Router: Delete the Router dataes and check it in ONOS
- * Create RouterInterface: Post RouterInterface data to an exist Router
+ * Delete Router: Delete the Router data and check it in ONOS
+ * Create RouterInterface: Post Router Interface data to an existing Router
and check it in ONOS
* Delete RouterInterface: Delete the RouterInterface and check the Router
- * Create FloatingIp: Post dataes for create FloatingIp and check it in
- ONOS
+ * Create FloatingIp: Post data for create FloatingIp and check it in ONOS
* Update FloatingIp: Update the FloatingIp and compare it in ONOS
- * Delete FloatingIp: Delete the FloatingIp and check if it's NULL in
- ONOS or not
- * Create External Gateway: Post dataes for create External Gateway to an
- exit Router and check it
- * Update External Gateway: Update the External Gateway and compare it
- * Delete External Gateway: Delete the External Gateway and check if it's
- NULL in ONOS or not
-
-
-OpenContrail
-^^^^^^^^^^^^
-TODO OVNO
-
+ * Delete FloatingIp: Delete the FloatingIp and check that it is 'NULL' in
+ ONOS
+ * Create External Gateway: Post data to create an External Gateway for an
+ existing Router and check it in ONOS
+ * Update External Gateway: Update the External Gateway and compare the change
+ * Delete External Gateway: Delete the External Gateway and check that it is
+ 'NULL' in ONOS
Features
--------
-vIMS
-^^^^
-The goal of this test suite consists of:
-
- * deploying a VNF orchestrator (cloudify)
- * deploy a Clearwater vIMS (IP Multimedia Subsystem) VNF from this
- orchestrator based on a TOSCA blueprint defined in `[5]`_
- * run suite of signaling tests on top of this VNF
-
-The Clearwater architecture is described as follows:
-
-.. figure:: ../images/clearwater-architecture.png
- :align: center
- :alt: vIMS architecture
-
-Two types of information are stored in the Test Database:
-
- * the duration of each step (orchestion deployment, VNF deployment and test)
- * the test results
-
-The deployment of a complete functional VNF allows the test of most of the
-essential functions needed for a NFV system.
-
-Promise
-^^^^^^^
-
-Promise provides a basic set of test cases as part of Brahmaputra.
+Most of the features have been developped by feature projects.
+Security_scan has been initiated in Functest repository but should soon
+be declared in its own repository as well.
-The available 33 test cases can be grouped into 7 test suites:
+Please refer to the dedicated feature user guides for details:
- #. Add a new OpenStack provider into resource pool: Registers
- OpenStack into a new resource pool and adds more capacity associated
- with this pool.
+ * bgpvpn: http://artifacts.opnfv.org/sdnvpn/colorado/docs/userguide/index.html
+ * copper: http://artifacts.opnfv.org/copper/colorado/docs/userguide/index.html
+ * doctor: http://artifacts.opnfv.org/doctor/colorado/userguide/index.html
+ * domino: http://artifacts.opnfv.org/domino/docs/userguide-single/index.html
+ * moon: http://artifacts.opnfv.org/moon/docs/userguide/index.html
+ * multisites: http://artifacts.opnfv.org/multisite/docs/userguide/index.html
+ * onos-sfc: http://artifacts.opnfv.org/onosfw/colorado/userguide/index.html
+ * odl-sfc: http://artifacts.opnfv.org/sfc/colorado/userguide/index.html
+ * promise: http://artifacts.opnfv.org/promise/colorado/docs/userguide/index.html
- #. Allocation without reservation: Creates a new server in OpenStack
- and adds a new allocation record in Promise shim-layer.
+security_scan
+^^^^^^^^^^^^^
- #. Allocation using reservation for immediate use: Creates a resource
- reservation record with no start/end time and immediately creates a new
- server in OpenStack and add a new allocation record in Promise
- shim-layer.
+Security Scanning, is a project to insure security compliance and vulnerability
+checks, as part of an automated CI / CD platform delivery process.
- #. Reservation for future use: Creates a resource reservation record
- for a future start time, queries, modifies and cancels the newly created
- reservation.
+The project makes use of the existing SCAP format[6] to perform deep scanning of
+NFVi nodes, to insure they are hardened and free of known CVE reported vulnerabilities.
- #. Capacity planning: Decreases and increases the available capacity
- from a provider in the future and queries the available collections and
- utilizations.
+The SCAP content itself, is then consumed and run using an upstream opensource tool
+known as OpenSCAP[7].
- #. Reservation with conflict: Tries to create reservations for
- immediate and future use with conflict.
+The OPNFV Security Group have developed the code that will called by the OPNFV Jenkins
+build platform, to perform a complete scan. Resulting reports are then copied to the
+OPNFV functest dashboard.
- #. Cleanup test allocations: Destroys all allocations in OpenStack.
+The current work flow is as follows:
-The test results are pushed into the LF test DB:
- * Duration of the Promise test case
- * Number of tests / failures
+ * Jenkins Build Initiated
+ * security_scan.py script is called, and a config file is passed to the script as
+ an argument.
+ * The IP addresses of each NFVi node (compute / control) are gathered
+ * A scan profile is matched to the node type.
+ * The OpenSCAP application is remotely installed onto each target node gathered
+ on step 3, using upstream packaging (rpm and .deb).
+ * A scan is made against each node gathered within step 3.
+ * HTML Reports are downloaded for rendering on a dashboard.
+ * If the config file value 'clean' is set to 'True' then the application installed in
+ step 5 is removed, and all reports created at step 6 are deleted.
-The specific parameters for Promise can be found in config_functest.yaml and
-include::
+At present, only the Apex installer is supported, with support for other installers due
+within D-release.
- promise:
- general:
- tenant_name: Name of the OpenStack tenant/project (e.g. promise)
- tenant_description: Description of the OpenStack tenant (e.g. promise Functionality Testing)
- user_name: Name of the user tenant (e.g. promiser)
- user_pwd: Password of the user tenant (e.g. test)
- image_name: Name of the software image (e.g. promise-img)
- flavor_name: Name of the flavor (e.g. promise-flavor with 1 vCPU and 512 MB RAM)
- flavor_vcpus: 1
- flavor_ram: 512
- flavor_disk: 0
-.. include:: ./runfunctest.rst
-
-Test results
-============
-VIM
+VNF
---
-vPing
-^^^^^
-
-vPing results are displayed in the console::
-
- FUNCTEST.info: Running vPing test...
- 2016-01-23 03:18:20,153 - vPing- INFO - Creating neutron network vping-net...
- 2016-01-23 03:18:35,476 - vPing- INFO - Flavor found 'm1.small'
- 2016-01-23 03:18:36,350 - vPing- INFO - vPing Start Time:'2016-01-23 03:18:36'
- 2016-01-23 03:18:38,571 - vPing- INFO - Creating instance 'opnfv-vping-1' with IP 192.168.130.30...
- 2016-01-23 03:18:53,716 - vPing- INFO - Instance 'opnfv-vping-1' is ACTIVE.
- 2016-01-23 03:18:55,239 - vPing- INFO - Creating instance 'opnfv-vping-2' with IP 192.168.130.40...
- 2016-01-23 03:19:15,593 - vPing- INFO - Instance 'opnfv-vping-2' is ACTIVE.
- 2016-01-23 03:19:15,593 - vPing- INFO - Creating floating IP for the second VM...
- 2016-01-23 03:19:18,017 - vPing- INFO - Floating IP created: '10.2.65.6'
- 2016-01-23 03:19:18,017 - vPing- INFO - Associating floating ip: '10.2.65.6' to VM2
- 2016-01-23 03:19:37,839 - vPing- INFO - SCP ping script to VM2...
- 2016-01-23 03:19:37,839 - vPing- INFO - Waiting for ping...
- 2016-01-23 03:19:40,130 - vPing- INFO - vPing detected!
- 2016-01-23 03:19:40,130 - vPing- INFO - vPing duration:'63.8'
- 2016-01-23 03:19:40,130 - vPing- INFO - Cleaning up...
- 2016-01-23 03:20:06,574 - vPing- INFO - Deleting network 'vping-net'...
- 2016-01-23 03:20:13,587 - vPing- INFO - vPing OK
-
-
-
-
-vPing_userdata
-^^^^^^^^^^^^^^
-
-vPing_userdata results are displayed in the console::
-
- 2016-01-06 16:06:20,550 - vPing- INFO - Creating neutron network vping-net...
- 2016-01-06 16:06:23,867 - vPing- INFO - Flavor found 'm1.small'
- 2016-01-06 16:06:24,457 - vPing- INFO - vPing Start Time:'2016-01-06 16:06:24'
- 2016-01-06 16:06:24,626 - vPing- INFO - Creating instance 'opnfv-vping-1' with IP 192.168.130.30...
- 2016-01-06 16:06:39,351 - vPing- INFO - Instance 'opnfv-vping-1' is ACTIVE.
- 2016-01-06 16:06:39,650 - vPing- INFO - Creating instance 'opnfv-vping-2' with IP 192.168.130.40...
- 2016-01-06 16:06:53,330 - vPing- INFO - Instance 'opnfv-vping-2' is ACTIVE.
- 2016-01-06 16:06:53,330 - vPing- INFO - Waiting for ping...
- 2016-01-06 16:06:58,669 - vPing- INFO - vPing detected!
- 2016-01-06 16:06:58,669 - vPing- INFO - vPing duration:'34.2'
- 2016-01-06 16:06:58,670 - vPing- INFO - Cleaning up...
- 2016-01-06 16:07:12,661 - vPing- INFO - Deleting network 'vping-net'...
- 2016-01-06 16:07:14,748 - vPing- INFO - vPing OK
-
-A json file is produced and pushed into the test result database.
-
-
-Tempest
-^^^^^^^
-
-The Tempest results are displayed in the console::
-
- FUNCTEST.info: Running Tempest tests...
- 2016-01-28 07:56:55,380 - run_tempest - INFO - Creating tenant and user for Tempest suite
- 2016-01-28 07:56:56.127 23795 INFO rally.verification.tempest.tempest [-] Starting: Creating configuration file for Tempest.
- 2016-01-28 07:56:59.512 23795 INFO rally.verification.tempest.tempest [-] Completed: Creating configuration file for Tempest.
- 16-01-28 07:57:00,597 - run_tempest - INFO - Starting Tempest test suite: '--tests-file /home/opnfv/repos/functest/testcases/VIM/OpenStack/CI/custom_tests/test_list.txt'.
- Total results of verification:
- .
- +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+
- | UUID | Deployment UUID | Set name | Tests | Failures | Created at | Status |
- +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+
- | e0bf7770-2c0f-4c63-913c-cd51a6edd96d | 16582e1e-7b01-4d5d-9c13-a26db8567b7b | | 144 | 30 | 2016-01-28 07:57:01.044856 | finished |
- +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+
- .
- Tests:
- .
- +------------------------------------------------------------------------------------------------------------------------------------------+-----------+---------+
- | name | time | status |
- +------------------------------------------------------------------------------------------------------------------------------------------+-----------+---------+
- | tempest.api.compute.flavors.test_flavors.FlavorsV2TestJSON.test_get_flavor | 0.29804 | success |
- | tempest.api.compute.flavors.test_flavors.FlavorsV2TestJSON.test_list_flavors | 0.06289 | success |
- | tempest.api.compute.images.test_images.ImagesTestJSON.test_delete_saving_image | 9.21756 | success |
- | tempest.api.compute.images.test_images_oneserver.ImagesOneServerTestJSON.test_create_delete_image | 8.65376 | success |
- | tempest.api.compute.images.test_images_oneserver.ImagesOneServerTestJSON.test_create_image_specify_multibyte_character_image_name | 9.10993 | success |
- | tempest.api.compute.images.test_list_image_filters.ListImageFiltersTestJSON.test_list_images_filter_by_changes_since | 0.19585 | success |
- ...........................................
- 2016-01-28 08:19:32,132 - run_tempest - INFO - Results: {'timestart': '2016-01-2807:57:01.044856', 'duration': 1350, 'tests': 144, 'failures': 30}
- 2016-01-28 08:19:32,133 - run_tempest - INFO - Pushing results to DB: 'http://testresults.opnfv.org/testapi/results'.
- 2016-01-28 08:19:32,278 - run_tempest - INFO - Deleting tenant and user for Tempest suite)
-
-In order to check all the available test cases related debug information, please
-inspect tempest.log file stored into related Rally deployment folder.
-The Tempest log is also automatically pushed to OPNFV artifact server in
-Continuous Integration.
-The Tempest results are also pushed to the Test Database from Continuous
-Integration.
-
-
-Rally
-^^^^^
-
-The Rally results are displayed in the console, each module is run one after the
-other. Tables are displayed::
-
- +-------------------------------------------------------------------------------------------+
- | Response Times (sec) |
- +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- | action | min | median | 90%ile | 95%ile | max | avg | success | count |
- +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- | keystone.create_role | 0.358 | 0.572 | 0.772 | 0.811 | 1.106 | 0.603 | 100.0% | 20 |
- | keystone.add_role | 0.32 | 0.436 | 0.846 | 0.903 | 1.018 | 0.51 | 100.0% | 20 |
- | keystone.list_roles | 0.102 | 0.185 | 0.253 | 0.275 | 0.347 | 0.188 | 100.0% | 20 |
- | total | 0.845 | 1.223 | 1.821 | 1.822 | 1.823 | 1.302 | 100.0% | 20 |
- +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- Load duration: 7.13633608818
- Full duration: 36.7863121033
- ..............
- +------------------------------------------------------------------------------------------+
- | Response Times (sec) |
- +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- | action | min | median | 90%ile | 95%ile | max | avg | success | count |
- +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- | nova.create_keypair | 1.005 | 1.784 | 3.025 | 3.636 | 4.373 | 2.004 | 100.0% | 20 |
- | nova.delete_keypair | 0.199 | 0.699 | 1.007 | 1.244 | 3.014 | 0.79 | 100.0% | 20 |
- | total | 1.249 | 2.625 | 4.259 | 4.845 | 5.131 | 2.794 | 100.0% | 20 |
- +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+
- Load duration: 14.9231169224
- Full duration: 71.4614388943
-
-
-At the end of the module test, a message is displayed to provide a global
-summary::
-
- 2016-02-04 12:50:18,382 - run_rally - INFO - Test scenario: "requests" OK.
-
-The raw results are pushed into the Test Database from Continuous Integration.
-
-
-Controllers
------------
-
-OpenDaylight
-^^^^^^^^^^^^
-
-The results of ODL tests can be seen in the console::
-
- ==============================================================================
- Basic
- ==============================================================================
- Basic.010 Restconf OK :: Test suite to verify Restconf is OK
- ==============================================================================
- Get Controller Modules :: Get the controller modules via Restconf | PASS |
- ------------------------------------------------------------------------------
- Basic.010 Restconf OK :: Test suite to verify Restconf is OK | PASS |
- 1 critical test, 1 passed, 0 failed
- 1 test total, 1 passed, 0 failed
- ==============================================================================
- Basic | PASS |
- 1 critical test, 1 passed, 0 failed
- 1 test total, 1 passed, 0 failed
- ==============================================================================
- Output: /home/jenkins-ci/workspace/functest-opnfv-jump-2/output.xml
- Log: /home/jenkins-ci/workspace/functest-opnfv-jump-2/log.html
- Report: /home/jenkins-ci/workspace/functest-opnfv-jump-2/report.html
-
- ..............................................................................
-
- Neutron.Delete Networks :: Checking Network deleted in OpenStack a... | PASS |
- 2 critical tests, 2 passed, 0 failed
- 2 tests total, 2 passed, 0 failed
- ==============================================================================
- Neutron :: Test suite for Neutron Plugin | PASS |
- 18 critical tests, 18 passed, 0 failed
- 18 tests total, 18 passed, 0 failed
- ==============================================================================
- Output: /home/jenkins-ci/workspace/functest-opnfv-jump-2/output.xml
- Log: /home/jenkins-ci/workspace/functest-opnfv-jump-2/log.html
- Report: /home/jenkins-ci/workspace/functest-opnfv-jump-2/report.html
-
-3 result files are generated:
- * output.xml
- * log.html
- * report.html
-
-**ODL result page**
-
-.. figure:: ../images/functestODL.png
- :width: 170mm
- :align: center
- :alt: ODL suite result page
-
-
-ONOS
-^^^^
-
-The ONOS test logs can be found in OnosSystemTest/, and TestON/, and logs/
-(ONOSCI_PATH to be added), and can also be seen in the console::
-
- ******************************
- Result summary for Testcase4
- ******************************
-
- 2016-01-14 05:25:40,529 - FUNCvirNetNBL3 - INFO - ONOS Router Delete test Start
-
- [2016-01-14 05:25:40.529644] [FUNCvirNetNBL3] [CASE] Virtual Network NBI Test - Router
- 2016-01-14 05:25:40,530 - FUNCvirNetNBL3 - INFO - Generate Post Data
-
- [2016-01-14 05:25:40.530825] [FUNCvirNetNBL3] [STEP] 4.1: Post Network Data via HTTP(Post Router need post network)
- 2016-01-14 05:25:40,531 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/networks/ using POST method.
- 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal
- 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Post Network Success
- 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Assertion Passed
-
- [2016-01-14 05:25:40.539687] [FUNCvirNetNBL3] [STEP] 4.2: Post Router Data via HTTP
- 2016-01-14 05:25:40,540 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/ using POST method.
- 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal
- 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Post Router Success
- 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Assertion Passed
-
- [2016-01-14 05:25:40.543489] [FUNCvirNetNBL3] [STEP] 4.3: Delete Router Data via HTTP
- 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/e44bd655-e22c-4aeb-b1e9-ea1606875178 using DELETE method.
- 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal
- 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Delete Router Success
- 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Assertion Passed
-
- [2016-01-14 05:25:40.546774] [FUNCvirNetNBL3] [STEP] 4.4: Get Router Data is NULL
- 2016-01-14 05:25:40,547 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/e44bd655-e22c-4aeb-b1e9-ea1606875178 using GET method.
- 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal
- 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Get Router Success
- 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Assertion Passed
-
-
- *****************************
- Result: Pass
- *****************************
-
- .......................................................................................
-
- ******************************
- Result summary for Testcase9
- ******************************
- .......................................................................................
-
-
- [2016-01-14 05:26:42.543489] [FUNCvirNetNBL3] [STEP] 9.6: FloatingIp Clean Data via HTTP
- 2016-01-14 05:26:42,543 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/floatingips/e44bd655-e22c-4aeb-b1e9-ea1606875178 using DELETE method.
- 2016-01-14 05:26:42,546 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal
- 2016-01-14 05:26:42,546 - FUNCvirNetNBL3 - ERROR - Delete Floatingip failed
-
- .......................................................................................
-
- *****************************
- Result: Failed
- *****************************
-
-There is a result summary for each testcase, and a global summary for the whole test.
-If any problem occurs during the test, a ERROR message will be provided in the test and the the global summary::
-
- *************************************
- Test Execution Summary
- *************************************
-
- Test Start : 14 Jan 2016 05:25:37
- Test End : 14 Jan 2016 05:25:41
- Execution Time : 0:00:03.349087
- Total tests planned : 11
- Total tests RUN : 11
- Total Pass : 8
- Total Fail : 3
- Total No Result : 0
- Success Percentage : 72%
- Execution Result : 100%
-
-
-OpenContrail
-^^^^^^^^^^^^
-
-TODO OVNO
-
-
-Feature
--------
vIMS
^^^^
+The IP Multimedia Subsystem or IP Multimedia Core Network Subsystem (IMS) is an
+architectural framework for delivering IP multimedia services.
-The results in the console can be described as follows::
-
- FUNCTEST.info: Running vIMS test...
- 2016-02-04 13:46:25,025 - vIMS - INFO - Prepare OpenStack plateform (create tenant and user)
- 2016-02-04 13:46:25,312 - vIMS - INFO - Update OpenStack creds informations
- 2016-02-04 13:46:25,312 - vIMS - INFO - Upload some OS images if it doesn't exist
- 2016-02-04 13:46:25,566 - vIMS - INFO - centos_7 image doesn't exist on glance repository.
- Try downloading this image and upload on glance !
- 2016-02-04 13:47:06,167 - vIMS - INFO - ubuntu_14.04 image doesn't exist on glance repository.
- Try downloading this image and upload on glance !
- 2016-02-04 13:47:26,987 - vIMS - INFO - Update security group quota for this tenant
- 2016-02-04 13:47:27,193 - vIMS - INFO - Update cinder quota for this tenant
- 2016-02-04 13:47:27,746 - vIMS - INFO - Collect flavor id for cloudify manager server
- 2016-02-04 13:47:28,326 - vIMS - INFO - Prepare virtualenv for cloudify-cli
- 2016-02-04 13:48:00,657 - vIMS - INFO - Downloading the cloudify manager server blueprint
- 2016-02-04 13:48:03,391 - vIMS - INFO - Cloudify deployment Start Time:'2016-02-04 13:48:03'
- 2016-02-04 13:48:03,391 - vIMS - INFO - Writing the inputs file
- 2016-02-04 13:48:03,395 - vIMS - INFO - Launching the cloudify-manager deployment
- 2016-02-04 13:56:03,501 - vIMS - INFO - Cloudify-manager server is UP !
- 2016-02-04 13:56:03,502 - vIMS - INFO - Cloudify deployment duration:'480.1'
- 2016-02-04 13:56:03,502 - vIMS - INFO - Collect flavor id for all clearwater vm
- 2016-02-04 13:56:04,093 - vIMS - INFO - vIMS VNF deployment Start Time:'2016-02-04 13:56:04'
- 2016-02-04 13:56:04,093 - vIMS - INFO - Downloading the openstack-blueprint.yaml blueprint
- 2016-02-04 13:56:06,265 - vIMS - INFO - Writing the inputs file
- 2016-02-04 13:56:06,268 - vIMS - INFO - Launching the clearwater deployment
- 2016-02-04 14:11:27,101 - vIMS - INFO - The deployment of clearwater-opnfv is ended
- 2016-02-04 14:11:27,103 - vIMS - INFO - vIMS VNF deployment duration:'923.0'
- 2016-02-04 14:14:31,976 - vIMS - INFO - vIMS functional test Start Time:'2016-02-04 14:14:31'
- 2016-02-04 14:15:45,880 - vIMS - INFO - vIMS functional test duration:'73.9'
- 2016-02-04 14:15:46,113 - vIMS - INFO - Launching the clearwater-opnfv undeployment
- 2016-02-04 14:18:12,604 - vIMS - INFO - Launching the cloudify-manager undeployment
- 2016-02-04 14:18:51,808 - vIMS - INFO - Cloudify-manager server has been successfully removed!
- 2016-02-04 14:18:51,870 - vIMS - INFO - Removing vIMS tenant ..
- 2016-02-04 14:18:52,131 - vIMS - INFO - Removing vIMS user ..
-
-Please note that vIMS traces can bee summarized in several steps:
-
- * INFO: environment prepared successfully => environment OK
- * INFO - Cloudify-manager server is UP ! => orchestrator deployed
- * INFO - The deployment of clearwater-opnfv is ended => VNF deployed
- * Multiple Identities (UDP) - (6505550771, 6505550675) Passed => tests run
- * DEBUG - Pushing results to DB.... => tests saved
-
-
-Promise
-^^^^^^^
-
-The results can be observed in the console::
-
- Running test case: promise
- ----------------------------------------------
- FUNCTEST.info: Running PROMISE test case...
- 2016-02-04 07:10:37,735 - Promise- INFO - Creating tenant 'promise'...
- 2016-02-04 07:10:37,893 - Promise- INFO - Adding role '59828986a9a94dfaa852548599fde628' to tenant 'promise'...
- 2016-02-04 07:10:38,005 - Promise- INFO - Creating user 'promiser'...
- 2016-02-04 07:10:38,128 - Promise- INFO - Updating OpenStack credentials...
- 2016-02-04 07:10:38,157 - Promise- INFO - Creating image 'promise-img' from '/home/opnfv/functest/data/cirros-0.3.4-x86_64-disk.img'...
- 2016-02-04 07:10:42,016 - Promise- INFO - Creating flavor 'promise-flavor'...
- 2016-02-04 07:10:42,836 - Promise- INFO - Exporting environment variables...
- 2016-02-04 07:10:42,836 - Promise- INFO - Running command: DEBUG=1 npm run -s test -- --reporter json
- 2016-02-04 07:10:51,505 - Promise- INFO - The test succeeded.
- ....
- **********************************
- Promise test summary
- **********************************
- Test start: Thu Feb 04 07:10:42 UTC 2016
- Test end: Thu Feb 04 07:10:51 UTC 2016
- Execution time: 8.7
- Total tests executed: 33
- Total tests failed: 0
- **********************************
-
-
-
-Functest in test Dashboard
-==========================
-
-The OPNFV testing group created a test collection database to collect the test
-results from CI.
-Any test project running on any lab integrated in CI can push the results to
-this database.
-This database can be used afterwards to see the evolution of the tests and
-compare the results versus the installers, the scenario or the labs.
-
-You can find more information about the dashboard from Testing Dashboard wiki
-page `[6]`_.
-
-
-Overall Architecture
---------------------
-
-The Test result management in Brahmaputra can be summarized as follows::
-
- +-------------+ +-------------+ +-------------+
- | | | | | |
- | Test | | Test | | Test |
- | Project #1 | | Project #2 | | Project #N |
- | | | | | |
- +-------------+ +-------------+ +-------------+
- | | |
- V V V
- +-----------------------------------------+
- | |
- | Test Rest API front end |
- | http://testresults.opnfv.org/testapi |
- | |
- +-----------------------------------------+
- A |
- | V
- | +-------------------------+
- | | |
- | | Test Results DB |
- | | Mongo DB |
- | | |
- | +-------------------------+
- |
- |
- +----------------------+
- | |
- | test Dashboard |
- | |
- +----------------------+
-
-The Test dashboard URL is: TODO LF
-A proto Test dashboard has been realized: http://testresults.opnfv.org/proto/
-
-Test API description
---------------------
-
-The Test API is used to declare pods, projects, test cases and test results. An
-additional method dashboard has been added to post-process the raw results. The
-data model is very basic, 4 objects are created:
-
- * Pods
- * Test projects
- * Test cases
- * Test results
-
-Pods::
-
- {
- "id": <ID>,
- "details": <URL description of the POD>,
- "creation_date": YYYY-MM-DD HH:MM:SS ,
- "name": <The POD Name>,
- "mode": <metal or virtual>
- },
-
-Test project::
-
- {
- "id": <ID>,
- "name": <Name of the Project>,
- "creation_date": "YYYY-MM-DD HH:MM:SS",
- "description": <Short description>
- },
-
-Test case::
-
- {
- "id": <ID>,
- "name":<Name of the test case>,
- "creation_date": "YYYY-MM-DD HH:MM:SS",
- "description": <short description>,
- "url":<URL for longer description>
- },
-
-Test results::
-
- {
- "_id": <ID,
- "project_name": <Reference to project>,
- "pod_name": <Reference to POD where the test was executed>,
- "version": <Scenario on which the test was executed>,
- "installer": <Installer Apex or Compass or Fuel or Joid>,
- "description": <Short description>,
- "creation_date": "YYYY-MM-DD HH:MM:SS",
- "case_name": <Reference to the test case>
- "details":{
- <- the results to be put here ->
- }
-
-
-For Brahmaputra, we got:
-
- * 16 pods
- * 18 projects
- * 101 test cases
-
-The projects and the test cases have been frozen in December.
-But all were not ready for Brahmaputra.
-
-
-
-The API can described as follows:
-
-Version:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /version | Get API version |
- +--------+--------------------------+-----------------------------------------+
-
-
-Pods:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /pods | Get the list of declared Labs (PODs) |
- +--------+--------------------------+-----------------------------------------+
- | POST | /pods | Declare a new POD |
- | | | Content-Type: application/json |
- | | | { |
- | | | "name": "pod_foo", |
- | | | "creation_date": "YYYY-MM-DD HH:MM:SS"|
- | | | } |
- +--------+--------------------------+-----------------------------------------+
-
-Projects:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /test_projects | Get the list of test projects |
- +--------+--------------------------+-----------------------------------------+
- | GET |/test_projects/{project} | Get details on {project} |
- | | | |
- +--------+--------------------------+-----------------------------------------+
- | POST | /test_projects | Add a new test project |
- | | | Content-Type: application/json |
- | | | { |
- | | | "name": "project_foo", |
- | | | "description": "whatever you want" |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | PUT | /test_projects/{project} | Update a test project |
- | | | |
- | | | Content-Type: application/json |
- | | | { |
- | | | <the field(s) you want to modify> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | DELETE | /test_projects/{project} | Delete a test project |
- +--------+--------------------------+-----------------------------------------+
-
-
-Test cases:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /test_projects/{project}/| Get the list of test cases of {project} |
- | | cases | |
- +--------+--------------------------+-----------------------------------------+
- | POST | /test_projects/{project}/| Add a new test case to {project} |
- | | cases | Content-Type: application/json |
- | | | { |
- | | | "name": "case_foo", |
- | | | "description": "whatever you want" |
- | | | "creation_date": "YYYY-MM-DD HH:MM:SS"|
- | | | "url": "whatever you want" |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | PUT | /test_projects/{project}?| Modify a test case of {project} |
- | | case_name={case} | |
- | | | Content-Type: application/json |
- | | | { |
- | | | <the field(s) you want to modify> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | DELETE | /test_projects/{project}/| Delete a test case |
- | | case_name={case} | |
- +--------+--------------------------+-----------------------------------------+
-
-Test Results:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET |/results/project={project}| Get the test results of {project} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results/case={case} | Get the test results of {case} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?pod={pod} | get the results on pod {pod} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?installer={inst} | Get the test results of installer {inst}|
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?version={version}| Get the test results of scenario |
- | | | {version}. Initially the version param |
- | | | was reflecting git version, in Functest |
- | | | it was decided to move to scenario |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?project={project}| Get all the results of the test case |
- | |&case={case} | {case} of the project {project} with |
- | |&version={scenario} | version {scenario} installed by |
- | |&installer={installer} | {installer} on POD {pod} stored since |
- | |&pod={pod} | {days} days |
- | | | {project_name} and {case_name} are |
- | |&period={days} | mandatory, the other parameters are |
- | | | optional. |
- +--------+--------------------------+-----------------------------------------+
- | POST | /results | Add a new test results |
- | | | Content-Type: application/json |
- | | | { |
- | | | "project_name": "project_foo", |
- | | | "case_name": "case_foo", |
- | | | "pod_name": "pod_foo", |
- | | | "installer": "installer_foo", |
- | | | "version": "scenario_foo", |
- | | | "details": <your results> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
-
-
-Dashboard:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET |/dashboard? | Get all the dashboard ready results of |
- | |&project={project} | {case} of the project {project} |
- | |&case={case} | version {scenario} installed by |
- | |&version={scenario} | {installer} on POD {pod} stored since |
- | |&installer={installer} | {days} days |
- | |&pod={pod} | |
- | |&period={days} | {project_name} and {case_name} are |
- | | | mandatory, the other parameters are |
- | | | optional. |
- +--------+--------------------------+-----------------------------------------+
-
-
-The results with dashboard method are post-processed from raw results.
-Please note that dashboard results are not stored. Only raw results are stored.
+vIMS has been integrated in Functest to demonstrate the capability to deploy a
+relatively complex NFV scenario on the OPNFV platform. The deployment of a complete
+functional VNF allows the test of most of the
+essential functions needed for a NFV platform.
+The goal of this test suite consists of:
+ * deploy a VNF orchestrator (Cloudify)
+ * deploy a Clearwater vIMS (IP Multimedia Subsystem) VNF from this
+ orchestrator based on a TOSCA blueprint defined in `[5]`_
+ * run suite of signaling tests on top of this VNF
-Test Dashboard
---------------
-
-Based on dashboard post-porcessed results, a Test dashboard is automatically
-generated.
-
-TODO LF
-or http://testresults.opnfv.org/proto/
-
-
-Troubleshooting
-===============
+The Clearwater architecture is described as follows:
-VIM
----
+.. figure:: ../images/clearwater-architecture.png
+ :align: center
+ :alt: vIMS architecture
-vPing
-^^^^^
-vPing should work on all the scenarios. In case of timeout, check your network
-connectivity. The test case creates its own security group to allow SSH access,
-check your network settings and your security rules.
+parser
+^^^^^^
+See parser user guide for details: `[12]`_
-vPing_userdata
-^^^^^^^^^^^^^^
-Cloud-init in not supported on scenario dealing with ONOS.
+.. include:: ./runfunctest.rst
-Tempest
-^^^^^^^
-In the upstream OpenStack CI all the Tempest test cases are supposed to pass.
-If some test cases fail in an OPNFV deployment, the reason is very probably one
-of the following::
-
- +-----------------------------+------------------------------------------------+
- | Error | Details |
- +=============================+================================================+
- | Resources required for test | Such resources could be e.g. an external |
- | case execution are missing | network and access to the management subnet |
- | | (adminURL) from the Functest docker container. |
- +-----------------------------+------------------------------------------------+
- | OpenStack components or | Check running services in the controller and |
- | services are missing or not | compute nodes (e.g. with "systemctl" or |
- | configured properly | "service" commands). Configuration parameters |
- | | can be verified from related .conf files |
- | | located under /etc/<component> directories. |
- +-----------------------------+------------------------------------------------+
- | Some resources required for | The tempest.conf file, automatically generated |
- | execution test cases are | by Rally in Functest, does not contain all the |
- | missing | needed parameters or some parameters are not |
- | | set properly. |
- | | The tempest.conf file is located in /home/opnfv|
- | | /.rally/tempest/for-deployment-<UUID> in |
- | | Functest container |
- | | Use "rally deployment list" command in order to|
- | | check UUID of current deployment. |
- +-----------------------------+------------------------------------------------+
-
-
-When some Tempest test case fails, captured traceback and possibly also related
-REST API requests/responses are output to the console.
-More detailed debug information can be found from tempest.log file stored into
-related Rally deployment folder.
-
-
-Rally
-^^^^^
-
-Same error causes than for Tempest mentioned above may lead to error in Rally.
-
-Controllers
------------
-
-ODL
-^^^
-2 versions are supported in Brahmaputra depending on the scenario:
- * Lithium
- * Berylium
-
-The upstream test suites have not been adapted, so you may get 18 or 15 tests
-passed on 18 depending on your configuration. The 3 testcases are partly failed
-due to wrong return code.
+Test results
+============
-ONOS
-^^^^
+Manual testing
+--------------
-TODO
+In manual mode test results are displayed in the console and result files
+are put in /home/opnfv/functest/results.
-OpenContrail
-^^^^^^^^^^^^
+Automated testing
+--------------
+In automated mode, test results are displayed in jenkins logs, a summary is provided
+at the end of the job and can be described as follow::
+
+ +==================================================================================================================================================+
+ | FUNCTEST REPORT |
+ +==================================================================================================================================================+
+ | |
+ | Deployment description: |
+ | INSTALLER: fuel |
+ | SCENARIO: os-odl_l2-nofeature-ha |
+ | BUILD TAG: jenkins-functest-fuel-baremetal-daily-master-324 |
+ | CI LOOP: daily |
+ | |
+ +=========================+===============+============+===============+===========================================================================+
+ | TEST CASE | TIER | DURATION | RESULT | URL |
+ +=========================+===============+============+===============+===========================================================================+
+ | healthcheck | healthcheck | 03:07 | PASS | |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | vping_ssh | smoke | 00:56 | PASS | http://testresults.opnfv.org/test/api/v1/results/57ac13d79377c54b278bd4c1 |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | vping_userdata | smoke | 00:41 | PASS | http://testresults.opnfv.org/test/api/v1/results/57ac14019377c54b278bd4c2 |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | tempest_smoke_serial | smoke | 16:05 | FAIL | http://testresults.opnfv.org/test/api/v1/results/57ac17ca9377c54b278bd4c3 |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | rally_sanity | smoke | 12:19 | PASS | http://testresults.opnfv.org/test/api/v1/results/57ac1aad9377c54b278bd4cd |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | odl | sdn_suites | 00:24 | PASS | http://testresults.opnfv.org/test/api/v1/results/57ac1ad09377c54b278bd4ce |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+ | promise | features | 00:41 | PASS | http://testresults.opnfv.org/test/api/v1/results/57ac1ae59377c54b278bd4cf |
+ +-------------------------+---------------+------------+---------------+---------------------------------------------------------------------------+
+
+Results are automatically pushed to the test results database, some additional
+result files are pushed to OPNFV artifact web sites.
+
+Based on the results stored in the result database, a `Functest reporting`_
+portal is also automatically updated. This portal provides information on:
+
+ * The overall status per scenario and per installer
+ * Tempest: Tempest test case including reported errors per scenario and installer
+ * vIMS: vIMS details per scenario and installer
+
+.. figure:: ../images/functest-reporting-status.png
+ :align: center
+ :alt: Functest reporting portal Fuel status page
-Feature
--------
-vIMS
-^^^^
+Test Dashboard
+==============
-TODO
+Based on results collected in CI, a test dashboard is dynamically generated.
-Promise
-^^^^^^^
+.. include:: ./troubleshooting.rst
-TODO
References
==========
-.. _`[1]`: Functest configuration guide URL
+.. _`[1]`: http://artifacts.opnfv.org/functest/colorado/docs/configguide/#
.. _`[2]`: http://docs.openstack.org/developer/tempest/overview.html
.. _`[3]`: https://rally.readthedocs.org/en/latest/index.html
.. _`[4]`: http://events.linuxfoundation.org/sites/events/files/slides/Functest%20in%20Depth_0.pdf
.. _`[5]`: https://github.com/Orange-OpenSource/opnfv-cloudify-clearwater/blob/master/openstack-blueprint.yaml
-.. _`[6]`: https://wiki.opnfv.org/opnfv_test_dashboard
-.. _`[7]`: http://testresults.opnfv.org/testapi/test_projects/functest/cases
-.. _`[8]`: https://wiki.openstack.org/wiki/Governance/DefCoreCommittee
+.. _`[6]`: https://scap.nist.gov/
+.. _`[7]`: https://github.com/OpenSCAP/openscap
.. _`[9]`: https://git.opnfv.org/cgit/functest/tree/testcases/VIM/OpenStack/CI/libraries/os_defaults.yaml
-.. _`[10]`: https://git.opnfv.org/cgit/functest/tree/testcases/VIM/OpenStack/CI/rally_cert/task.yaml
+.. _`[11]`: http://robotframework.org/
+.. _`[12]`: http://artifacts.opnfv.org/parser/colorado/docs/userguide/index.html
OPNFV main site: opnfvmain_.
.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html
.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py
.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml
+.. _`Functest reporting`: http://testresults.opnfv.org/reporting/functest/release/colorado/index-status-fuel.html
Code Review / functest.git / blobdiff