-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. SPDX-License-Identifier: CC-BY-4.0
Installation and configuration
the refactoring on dependency management should allow the creation of light and
fully customized docker images.
-It is still possible to use the monolithic Ubuntu image opnfv/functest especially
-for tests on Aarch64 architecture.
-Functest Dockers
-----------------
+Functest Dockers for OpenStack deployment
+-----------------------------------------
Docker images are available on the dockerhub:
* opnfv/functest-core
* opnfv/functest-healthcheck
* opnfv/functest-smoke
+ * opnfv/functest-benchmarking
* opnfv/functest-features
* opnfv/functest-components
* opnfv/functest-vnf
- * opnfv/functest-parser
- * opnfv/functest-restapi
-
-The tag "opnfv-5.0.0" is the official release image in Euphrates, but you can also pull "euphrates"
-tag as it is being maintained by Functest team and might include bugfixes.
-
-The Functest docker container environment can -in principle- be also
-used with non-OPNFV official installers (e.g. 'devstack'), with the
-**disclaimer** that support for such environments is outside of the
-scope and responsibility of the OPNFV project.
Preparing your environment
---------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^
cat env::
- INSTALLER_TYPE=XXX
- INSTALLER_IP=XXX
EXTERNAL_NETWORK=XXX
- DEPLOY_SCENARIO=XXX
+ DEPLOY_SCENARIO=XXX # if not os-nosdn-nofeature-noha scenario
+ NAMESERVER=XXX # if not 8.8.8.8
See section on environment variables for details.
-cat openstack.creds::
+cat env_file::
export OS_AUTH_URL=XXX
export OS_USER_DOMAIN_NAME=XXX
export OS_PROJECT_DOMAIN_NAME=XXX
export OS_USERNAME=XXX
- export OS_TENANT_NAME=XXX
export OS_PROJECT_NAME=XXX
export OS_PASSWORD=XXX
- export OS_VOLUME_API_VERSION=XXX
- export OS_IDENTITY_API_VERSION=XXX
- export OS_IMAGE_API_VERSION=XXX
+ export OS_IDENTITY_API_VERSION=3
See section on OpenStack credentials for details.
Create a directory for the different images (attached as a Docker volume)::
- mkdir -p images && wget -q -O- https://git.opnfv.org/functest/plain/functest/ci/download_images.sh?h=stable/euphrates | bash -s -- images && ls -1 images/*
+ mkdir -p images && wget -q -O- https://git.opnfv.org/functest/plain/functest/ci/download_images.sh?h=stable/fraser | bash -s -- images && ls -1 images/*
images/CentOS-7-aarch64-GenericCloud.qcow2
images/CentOS-7-aarch64-GenericCloud.qcow2.xz
images/CentOS-7-x86_64-GenericCloud.qcow2
- images/cirros-0.3.5-x86_64-disk.img
- images/cirros-0.3.5-x86_64-lxc.tar.gz
- images/cirros-d161201-aarch64-disk.img
- images/cirros-d161201-aarch64-initramfs
- images/cirros-d161201-aarch64-kernel
+ images/cirros-0.4.0-x86_64-disk.img
+ images/cirros-0.4.0-x86_64-lxc.tar.gz
images/cloudify-manager-premium-4.0.1.qcow2
- images/img
- images/trusty-server-cloudimg-amd64-disk1.img
+ images/shaker-image-arm64.qcow2
+ images/shaker-image.qcow
images/ubuntu-14.04-server-cloudimg-amd64-disk1.img
images/ubuntu-14.04-server-cloudimg-arm64-uefi1.img
images/ubuntu-16.04-server-cloudimg-amd64-disk1.img
images/vyos-1.1.7.img
-
Testing healthcheck suite
---------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^
Run healthcheck suite::
sudo docker run --env-file env \
- -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
- -v $(pwd)/images:/home/opnfv/functest/images \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
opnfv/functest-healthcheck
Results shall be displayed as follows::
+----------------------------+------------------+---------------------+------------------+----------------+
| TEST CASE | PROJECT | TIER | DURATION | RESULT |
+----------------------------+------------------+---------------------+------------------+----------------+
- | connection_check | functest | healthcheck | 00:02 | PASS |
- | api_check | functest | healthcheck | 04:57 | PASS |
- | snaps_health_check | functest | healthcheck | 00:51 | PASS |
+ | connection_check | functest | healthcheck | 00:09 | PASS |
+ | tenantnetwork1 | functest | healthcheck | 00:14 | PASS |
+ | tenantnetwork2 | functest | healthcheck | 00:11 | PASS |
+ | vmready1 | functest | healthcheck | 00:19 | PASS |
+ | vmready2 | functest | healthcheck | 00:16 | PASS |
+ | singlevm1 | functest | healthcheck | 00:41 | PASS |
+ | singlevm2 | functest | healthcheck | 00:36 | PASS |
+ | vping_ssh | functest | healthcheck | 00:46 | PASS |
+ | vping_userdata | functest | healthcheck | 00:41 | PASS |
+ | cinder_test | functest | healthcheck | 01:18 | PASS |
+ | api_check | functest | healthcheck | 10:33 | PASS |
+ | snaps_health_check | functest | healthcheck | 00:44 | PASS |
+ | odl | functest | healthcheck | 00:00 | SKIP |
+----------------------------+------------------+---------------------+------------------+----------------+
- NOTE: the duration is a reference and it might vary depending on your SUT.
+
+NOTE: the duration is a reference and it might vary depending on your SUT.
Testing smoke suite
--------------------
+^^^^^^^^^^^^^^^^^^^
Run smoke suite::
sudo docker run --env-file env \
- -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
- -v $(pwd)/images:/home/opnfv/functest/images \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
opnfv/functest-smoke
Results shall be displayed as follows::
- +------------------------------+------------------+---------------+------------------+----------------+
- | TEST CASE | PROJECT | TIER | DURATION | RESULT |
- +------------------------------+------------------+---------------+------------------+----------------+
- | vping_ssh | functest | smoke | 01:19 | PASS |
- | vping_userdata | functest | smoke | 01:56 | PASS |
- | tempest_smoke_serial | functest | smoke | 26:30 | PASS |
- | rally_sanity | functest | smoke | 19:42 | PASS |
- | refstack_defcore | functest | smoke | 22:00 | PASS |
- | snaps_smoke | functest | smoke | 41:14 | PASS |
- | odl | functest | smoke | 00:16 | PASS |
- | odl_netvirt | functest | smoke | 00:00 | SKIP |
- | fds | functest | smoke | 00:00 | SKIP |
- +------------------------------+------------------+---------------+------------------+----------------+
- Note: if the scenario does not support some tests, they are indicated as SKIP.
- See User guide for details.
+ +------------------------------------+------------------+---------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +------------------------------------+------------------+---------------+------------------+----------------+
+ | tempest_smoke | functest | smoke | 06:13 | PASS |
+ | neutron-tempest-plugin-api | functest | smoke | 09:32 | PASS |
+ | rally_sanity | functest | smoke | 29:34 | PASS |
+ | rally_jobs | functest | smoke | 24:02 | PASS |
+ | refstack_defcore | functest | smoke | 13:07 | PASS |
+ | patrole | functest | smoke | 05:17 | PASS |
+ | snaps_smoke | functest | smoke | 90:13 | PASS |
+ | neutron_trunk | functest | smoke | 00:00 | SKIP |
+ | networking-bgpvpn | functest | smoke | 00:00 | SKIP |
+ | networking-sfc | functest | smoke | 00:00 | SKIP |
+ | barbican | functest | smoke | 05:01 | PASS |
+ +------------------------------------+------------------+---------------+------------------+----------------+
+
+Note: if the scenario does not support some tests, they are indicated as SKIP.
+See User guide for details.
+
+Testing benchmarking suite
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Run benchmarking suite::
+
+ sudo docker run --env-file env \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
+ opnfv/functest-benchmarking
+
+Results shall be displayed as follows::
+
+ +-------------------+------------------+----------------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +-------------------+------------------+----------------------+------------------+----------------+
+ | vmtp | functest | benchmarking | 18:43 | PASS |
+ | shaker | functest | benchmarking | 29:45 | PASS |
+ +-------------------+------------------+----------------------+------------------+----------------+
+
+Note: if the scenario does not support some tests, they are indicated as SKIP.
+See User guide for details.
Testing features suite
-----------------------
+^^^^^^^^^^^^^^^^^^^^^^
Run features suite::
sudo docker run --env-file env \
- -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
- -v $(pwd)/images:/home/opnfv/functest/images \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
opnfv/functest-features
Results shall be displayed as follows::
- +---------------------------+--------------------------+------------------+------------------+----------------+
- | TEST CASE | PROJECT | TIER | DURATION | RESULT |
- +---------------------------+--------------------------+------------------+------------------+----------------+
- | promise | promise | features | 00:00 | SKIP |
- | bgpvpn | sdnvpn | features | 00:00 | SKIP |
- | security_scan | securityscanning | features | 00:00 | SKIP |
- | functest-odl-sfc | sfc | features | 00:00 | SKIP |
- | domino-multinode | domino | features | 00:00 | SKIP |
- | barometercollectd | barometer | features | 00:00 | SKIP |
- +---------------------------+--------------------------+------------------+------------------+----------------+
- Note: if the scenario does not support some tests, they are indicated as SKIP.
- See User guide for details.
+ +-----------------------------+------------------------+------------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +-----------------------------+------------------------+------------------+------------------+----------------+
+ | doctor-notification | doctor | features | 00:00 | SKIP |
+ | bgpvpn | sdnvpn | features | 00:00 | SKIP |
+ | functest-odl-sfc | sfc | features | 00:00 | SKIP |
+ | barometercollectd | barometer | features | 00:00 | SKIP |
+ | fds | fastdatastacks | features | 00:00 | SKIP |
+ | vgpu | functest | features | 00:00 | SKIP |
+ | stor4nfv_os | stor4nfv | features | 00:00 | SKIP |
+ +-----------------------------+------------------------+------------------+------------------+----------------+
+
+Note: if the scenario does not support some tests, they are indicated as SKIP.
+See User guide for details.
Testing components suite
-------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^
Run components suite::
sudo docker run --env-file env \
- -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
- -v $(pwd)/images:/home/opnfv/functest/images \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
opnfv/functest-components
Results shall be displayed as follows::
- +-------------------------------+------------------+--------------------+------------------+----------------+
- | TEST CASE | PROJECT | TIER | DURATION | RESULT |
- +-------------------------------+------------------+--------------------+------------------+----------------+
- | tempest_full_parallel | functest | components | 102:48 | PASS |
- | rally_full | functest | components | 160:58 | PASS |
- +-------------------------------+------------------+--------------------+------------------+----------------+
+ +--------------------------+------------------+--------------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +--------------------------+------------------+--------------------+------------------+----------------+
+ | tempest_full | functest | components | 49:51 | PASS |
+ | tempest_scenario | functest | components | 18:50 | PASS |
+ | rally_full | functest | components | 167:13 | PASS |
+ +--------------------------+------------------+--------------------+------------------+----------------+
Testing vnf suite
------------------
+^^^^^^^^^^^^^^^^^
Run vnf suite::
-sudo docker run --env-file env \
- -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
- -v $(pwd)/images:/home/opnfv/functest/images \
- opnfv/functest-vnf
+ sudo docker run --env-file env \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/env_file \
+ -v $(pwd)/images:/home/opnfv/functest/images \
+ opnfv/functest-vnf
Results shall be displayed as follows::
- +---------------------------------+------------------+--------------+------------------+----------------+
- | TEST CASE | PROJECT | TIER | DURATION | RESULT |
- +---------------------------------+------------------+--------------+------------------+----------------+
- | cloudify_ims | functest | vnf | 21:25 | PASS |
- | orchestra_openims | functest | vnf | 11:02 | FAIL |
- | orchestra_clearwaterims | functest | vnf | 09:13 | FAIL |
- +---------------------------------+------------------+--------------+------------------+----------------+
+ +----------------------+------------------+--------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +----------------------+------------------+--------------+------------------+----------------+
+ | cloudify | functest | vnf | 04:05 | PASS |
+ | cloudify_ims | functest | vnf | 24:07 | PASS |
+ | heat_ims | functest | vnf | 18:15 | PASS |
+ | vyos_vrouter | functest | vnf | 15:48 | PASS |
+ | juju_epc | functest | vnf | 29:38 | PASS |
+ +----------------------+------------------+--------------+------------------+----------------+
+
+Functest Dockers for Kubernetes deployment
+------------------------------------------
+Docker images are available on the dockerhub:
+
+ * opnfv/functest-kubernetes-core
+ * opnfv/functest-kubernetest-healthcheck
+ * opnfv/functest-kubernetest-smoke
+ * opnfv/functest-kubernetest-features
+
+Preparing your environment
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+cat env::
+
+ DEPLOY_SCENARIO=k8s-XXX
+Testing healthcheck suite
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Run healthcheck suite::
+
+ sudo docker run -it --env-file env \
+ -v $(pwd)/config:/root/.kube/config \
+ opnfv/functest-kubernetes-healthcheck
+
+A config file in the current dir 'config' is also required, which should be
+volume mapped to ~/.kube/config inside kubernetes container.
+
+Results shall be displayed as follows::
+
+ +-------------------+------------------+---------------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +-------------------+------------------+---------------------+------------------+----------------+
+ | k8s_smoke | functest | healthcheck | 02:27 | PASS |
+ +-------------------+------------------+---------------------+------------------+----------------+
+
+Testing smoke suite
+^^^^^^^^^^^^^^^^^^^
+
+Run smoke suite::
+
+ sudo docker run -it --env-file env \
+ -v $(pwd)/config:/root/.kube/config \
+ opnfv/functest-kubernetes-smoke
+
+Results shall be displayed as follows::
+
+ +-------------------------+------------------+---------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +-------------------------+------------------+---------------+------------------+----------------+
+ | k8s_conformance | functest | smoke | 57:14 | PASS |
+ +-------------------------+------------------+---------------+------------------+----------------+
+
+Testing features suite
+^^^^^^^^^^^^^^^^^^^^^^
+
+Run features suite::
+
+ sudo docker run -it --env-file env \
+ -v $(pwd)/config:/root/.kube/config \
+ opnfv/functest-kubernetes-features
+
+Results shall be displayed as follows::
+
+ +----------------------+------------------+------------------+------------------+----------------+
+ | TEST CASE | PROJECT | TIER | DURATION | RESULT |
+ +----------------------+------------------+------------------+------------------+----------------+
+ | stor4nfv_k8s | stor4nfv | stor4nfv | 00:00 | SKIP |
+ | clover_k8s | clover | clover | 00:00 | SKIP |
+ +----------------------+------------------+------------------+------------------+----------------+
Environment variables
=====================
Several environement variables may be specified:
- * INSTALLER_TYPE=(apex|compass|daisy|fuel|joid)
+
* INSTALLER_IP=<Specific IP Address>
* DEPLOY_SCENARIO=<vim>-<controller>-<nfv_feature>-<ha_mode>
+ * NAMESERVER=XXX # if not 8.8.8.8
+ * VOLUME_DEVICE_NAME=XXX # if not vdb
+ * EXTERNAL_NETWORK=XXX # if not first network with router:external=True
+ * NEW_USER_ROLE=XXX # if not member
-
-INSTALLER IP may be required by some test cases like SFC or Barometer in order
-to access the installer node and the deployment.
+INSTALLER_IP is required by Barometer in order to access the installer node and
+the deployment.
The format for the DEPLOY_SCENARIO env variable can be described as follows:
* vim: (os|k8s) = OpenStack or Kubernetes
**NOTE:** The scenario name is mainly used to automatically detect
if a test suite is runnable or not (e.g. it will prevent ODL test suite to be
-run on 'nosdn' scenarios). If not set, Functest will try to run the default test
-cases that might not include SDN controller or a specific feature
+run on 'nosdn' scenarios). If not set, Functest will try to run the default
+test cases that might not include SDN controller or a specific feature.
**NOTE:** An HA scenario means that 3 OpenStack controller nodes are
deployed. It does not necessarily mean that the whole system is HA. See
only relevant to Jenkins CI invoked testing and **should not be used**
when performing manual test scenarios:
- * NODE_NAME = <Test POD Name>
- * BUILD_TAG = <Jenkins Build Tag>
- * CI_DEBUG = <DebugTraceValue>
+ * INSTALLER_TYPE=(apex|compass|daisy|fuel)
+ * NODE_NAME=<Test POD Name>
+ * BUILD_TAG=<Jenkins Build Tag>
where:
which are independently pushed to the results database
from different Jenkins jobs.
DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS.
- * <DebugTraceValue> = "true" or "false"
- Default = "false", if not specified
- If "true" is specified, then additional debug trace
- text can be sent to the test results file / log files
- and also to the standard console output.
Openstack credentials
OpenStack credentials are mandatory and must be provided to Functest.
When running the command "functest env prepare", the framework will
automatically look for the Openstack credentials file
-"/home/opnfv/functest/conf/openstack.creds" and will exit with
+"/home/opnfv/functest/conf/env_file" and will exit with
error if it is not present or is empty.
There are 2 ways to provide that file:
* by using a Docker volume with -v option when creating the Docker container.
This is referred to in docker documentation as "Bind Mounting".
See the usage of this parameter in the following chapter.
- * or creating manually the file '/home/opnfv/functest/conf/openstack.creds'
+ * or creating manually the file '/home/opnfv/functest/conf/env_file'
inside the running container and pasting the credentials in it. Consult
your installer guide for further details. This is however not
instructed in this document.
export OS_INSECURE=true
-Functest docker container directory structure
-=============================================
-Inside the Functest docker container, the following directory structure
-should now be in place::
-
- `--
- |- home
- | |-- opnfv
- | | `- functest
- | | |-- conf
- | | `-- results
- | `-- repos
- | `-- vnfs
- |- src
- | |-- tempest
- | |-- vims-test
- | |-- odl_test
- | `-- fds
- `- usr
- `- lib
- `- python2.7
- `- site-packages
- `- functest
- |-- ...
-
-Underneath the '/home/opnfv/functest' directory, the Functest docker container
-includes two main directories:
-
- * The **conf** directory stores configuration files (e.g. the
- OpenStack creds are stored in path '/home/opnfv/functest/conf/openstack.creds'),
- * the **results** directory stores some temporary result log files
-
-src and repos directories are used to host third party code used for the tests.
-
-The structure of functest repo can be described as follows::
-
- |-- INFO
- |-- LICENSE
- |-- api
- | `-- apidoc
- |-- build.sh
- |-- docker
- | |-- Dockerfile
- | |-- Dockerfile.aarch64.patch
- | |-- components
- | |-- config_install_env.sh
- | |-- core
- | |-- docker_remote_api
- | |-- features
- | |-- healthcheck
- | |-- smoke
- | |-- vnf
- | |-- parser
- | |-- restapi
- | |-- thirdparty-requirements.txt
- |-- docs
- | |-- com
- | |-- images
- | |-- release
- | | `-- release-notes
- | |-- results
- | | testing
- | | |-- developer
- | | `-- user
- | | |-- configguide
- | | `-- userguide
- `-- functest
- |-- api
- | |-- base.py
- | |-- server.py
- | |-- urls.py
- | |-- common
- | | |-- api_utils.py
- | | |-- thread.py
- | `-- resources
- | `-- v1
- | |-- creds.py
- | |-- envs.py
- | |-- testcases.py
- | |-- tiers.py
- | |-- tasks.py
- | `-- database
- | |-- db.py
- | `-- v1
- | |-- handlers.py
- | |-- models.py
- | `-- swagger
- |-- ci
- │ |-- check_deployment.py
- │ |-- config_aarch64_patch.yaml
- │ |-- config_functest.yaml
- │ |-- config_patch.yaml
- │ |-- download_images.sh
- │ |-- installer_params.yaml
- │ |-- logging.ini
- │ |-- prepare_env.py
- │ |-- rally_aarch64_patch.conf
- │ |-- run_tests.py
- │ |-- testcases.yaml
- │ |-- tier_builder.py
- │ |-- tier_handler.py
- |-- cli
- │ |-- cli_base.py
- │ |-- commands
- │ │ |-- cli_env.py
- │ │ |-- cli_os.py
- │ │ |-- cli_testcase.py
- │ │ |-- cli_tier.py
- │ |-- functest-complete.sh
- |-- core
- │ |-- feature.py
- │ |-- testcase.py
- │ |-- unit.py
- │ |-- vnf.py
- |-- energy
- │ |-- energy.py
- |-- opnfv_tests
- │ `-- openstack
- │ |-- rally
- │ |-- refstack_client
- │ |-- snaps
- │ |-- tempest
- │ |-- vping
- │ `-- sdn
- │ │ `-- odl
- │ `-- vnf
- │ |-- ims
- │ `-- router
- |-- tests
- │ `-- unit
- │ |-- ci
- │ |-- cli
- │ |-- core
- │ |-- energy
- │ |-- features
- │ |-- odl
- │ |-- openstack
- │ |-- opnfv_tests
- │ |-- test_utils.py
- │ |-- utils
- │ `-- vnf
- |-- utils
- | |-- config.py
- | |-- constants.py
- | |-- decorators.py
- | |-- env.py
- | |-- functest_utils.py
- | |-- functest_vacation.py
- | |-- openstack_clean.py
- | |-- openstack_snapshot.py
- | |-- openstack_tacker.py
- | `-- openstack_utils.py
- |-- requirements.txt
- |-- setup.cfg
- |-- setup.py
- |-- test-requirements.txt
- |-- tox.ini
- |-- upper-constraints.txt
-
- (Note: All *.pyc files removed from above list for brevity...)
-
-We may distinguish several directories, the first level has 5 directories:
-
-* **api**: This directory is dedicated to the API (framework) documentations.
-* **commons**: This directory is dedicated for storage of traffic
- profile or any other test inputs that could be reused by any test
- project.
-* **docker**: This directory includes the needed files and tools to
- build the Functest Docker image.
-* **docs**: This directory includes documentation: Release Notes,
- User Guide, Configuration Guide and Developer Guide.
-* **functest**: This directory contains all the code needed to run
- functest internal cases and OPNFV onboarded feature or VNF test cases.
-
-Functest directory has 7 sub-directories, which is located under
-/usr/lib/python2.7/site-packages/functest:
- * **api**: This directory is dedicated for the internal Functest API and the
- API (framework) documentations.
- * **ci**: This directory contains test structure definition files
- (e.g <filename>.yaml) and bash shell/python scripts used to
- configure and execute Functional tests. The test execution script
- can be executed under the control of Jenkins CI jobs.
- * **cli**: This directory holds the python based Functest CLI utility
- source code, which is based on the Python 'click' framework.
- * **core**: This directory holds the python based Functest core
- source code. Three abstraction classes have been created to ease
- the integration of internal, feature or vnf cases.
- * **opnfv_tests**: This directory includes the scripts required by
- Functest internal test cases and other feature projects test cases.
- * **tests**: This directory includes the functest unit tests
- * **utils**: this directory holds Python source code for some general
- purpose helper utilities, which testers can also re-use in their
- own test code. See for an example the Openstack helper utility:
- 'openstack_utils.py'.
-
Logs
====
If you want to have more logs in console, you may edit the logging.ini file
manually.
Connect on the docker then edit the file located in
-/usr/lib/python2.7/site-packages/functest/ci/logging.ini
+/usr/lib/python2.7/site-packages/xtesting/ci/logging.ini
Change wconsole to console in the desired module to get more traces.
You may also directly modify the python code or the configuration file (e.g.
testcases.yaml used to declare test constraints) under
+/usr/lib/python2.7/site-packages/xtesting and
/usr/lib/python2.7/site-packages/functest
Once the credentials are there inside the container, they should be
sourced before running any Openstack commands::
- source /home/opnfv/functest/conf/openstack.creds
+ source /home/opnfv/functest/conf/env_file
After this, try to run any OpenStack command to see if you get any
output, for instance::
about connectivity issues, it could be due to an incorrect url given to
the OS_AUTH_URL environment variable. Check the deployment settings.
+.. _`Proxy support`:
+
Proxy support
-------------
If your Jumphost node is operating behind a http proxy, then there are
#. Initial installation of docker engine First, try following the
official Docker documentation for Proxy settings. Some issues were
experienced on CentOS 7 based Jumphost. Some tips are documented
- in section: `Docker Installation on CentOS behind http proxy`_
+ in section: :ref:`Docker Installation on CentOS behind http proxy`
below.
If that is the case, make sure the resolv.conf and the needed
'no_proxy' environment variable are set correctly::
# Make double sure that the 'no_proxy=...' line in the
- # 'openstack.creds' file is commented out first. Otherwise, the
+ # 'env_file' file is commented out first. Otherwise, the
# values set into the 'no_proxy' environment variable below will
# be ovewrwritten, each time the command
- # 'source ~/functest/conf/openstack.creds' is issued.
+ # 'source ~/functest/conf/env_file' is issued.
cd ~/functest/conf/
- sed -i 's/export no_proxy/#export no_proxy/' openstack.creds
- source ./openstack.creds
+ sed -i 's/export no_proxy/#export no_proxy/' env_file
+ source ./env_file
# Next calculate some IP addresses for which http_proxy
# usage should be excluded:
(Ignore the content. If command returns a valid HTML page, it proves
the connection.)
+.. _`Docker Installation on CentOS behind http proxy`:
+
Docker Installation on CentOS behind http proxy
-----------------------------------------------
This section is applicable for CentOS family OS on Jumphost which
.. _`[4]`: http://docs.opnfv.org/en/latest/submodules/functest/docs/testing/user/configguide/index.html
.. _`dockerdocs`: https://docs.docker.com/
-.. _`dockerhub`: https://hub.docker.com/r/opnfv/functest/
.. _`Proxy`: https://docs.docker.com/engine/admin/systemd/#http-proxy
-.. _`FunctestDockerTags`: https://hub.docker.com/r/opnfv/functest/tags/
.. _`Install Docker on CentOS`: https://docs.docker.com/engine/installation/linux/centos/
.. _`Functest User Guide`: http://docs.opnfv.org/en/stable-danube/submodules/functest/docs/testing/user/userguide/index.html
-.. _`images/CentOS-7-x86_64-GenericCloud.qcow2` http://download.cirros-cloud.net/0.3.5/cirros-0.3.5-x86_64-disk.img
-.. _`images/cirros-0.3.5-x86_64-disk.img` https://cloud-images.ubuntu.com/releases/14.04/release/ubuntu-14.04-server-cloudimg-amd64-disk1.img
-.. _`images/ubuntu-14.04-server-cloudimg-amd64-disk1.img` https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
+.. _`images/CentOS-7-x86_64-GenericCloud.qcow2`: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
+.. _`images/cirros-0.4.0-x86_64-disk.img`: http://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
+.. _`images/ubuntu-14.04-server-cloudimg-amd64-disk1.img`: https://cloud-images.ubuntu.com/releases/14.04/release/ubuntu-14.04-server-cloudimg-amd64-disk1.img