$ sudo apt-get install python
$ sudo apt-get install python-pip
- $ sudo pip install 'ansible==2.6.3'
+ $ sudo -H pip install 'ansible==2.6.3'
The following steps have been verified with Ansible 2.6.3 on Centos 7.5.
To install Ansible 2.6.3 on Centos:
$ sudo yum install python
$ sudo yum install epel-release
$ sudo yum install python-pip
- $ sudo pip install 'ansible==2.6.3'
+ $ sudo -H pip install 'ansible==2.6.3'
Clone barometer repo
^^^^^^^^^^^^^^^^^^^^
.. code:: bash
- $ sudo ssh-copy-id root@localhost
+ $ sudo -i
+ $ ssh-copy-id root@localhost
Verify that key is added and password is not required to connect.
.. code:: bash
- $ sudo ansible-playbook -i default.inv collectd_service.yml
+ $ sudo -H ansible-playbook -i default.inv collectd_service.yml
Check the three containers are running, the output of docker ps should be similar to:
$ git clone https://gerrit.opnfv.org/gerrit/barometer
$ cd barometer/docker/barometer-collectd
$ sudo docker build -t opnfv/barometer-collectd --build-arg http_proxy=`echo $http_proxy` \
- --build-arg https_proxy=`echo $https_proxy` -f Dockerfile .
+ --build-arg https_proxy=`echo $https_proxy` --network=host -f Dockerfile .
.. note::
Main directory of barometer source code (directory that contains 'docker',
plugins. In the command above we are overriding
/opt/collectd/etc/collectd.conf.d by mounting a host directory
src/collectd/collectd_sample_configs that contains only the sample
- configurations we are interested in running. *It's important to do
- this if you don't have DPDK, or RDT installed on the host*.
+ configurations we are interested in running.
+
+ *If some dependencies for plugins listed in configuration directory
+ aren't met, then collectd startup may fail(collectd tries to
+ initialize plugins configurations for all given config files that can
+ be found in shared configs directory and may fail if some dependency
+ is missing).*
+
+ If `DPDK` or `RDT` can't be installed on host, then corresponding config
+ files should be removed from shared configuration directory
+ (`<BAROMETER_REPO_DIR>/src/collectd/collectd_sample_configs/`) prior
+ to starting barometer-collectd container. By example: in case of missing
+ `DPDK` functionality on the host, `dpdkstat.conf` and `dpdkevents.conf`
+ should be removed.
+
Sample configurations can be found at:
https://github.com/opnfv/barometer/tree/master/src/collectd/collectd_sample_configs
+ List of barometer-collectd dependencies on host for various plugins
+ can be found at:
+ https://wiki.opnfv.org/display/fastpath/Barometer-collectd+host+dependencies
+
Check your docker image is running
.. code:: bash
$ cd barometer/docker/barometer-influxdb
$ sudo docker build -t opnfv/barometer-influxdb --build-arg http_proxy=`echo $http_proxy` \
- --build-arg https_proxy=`echo $https_proxy` -f Dockerfile .
+ --build-arg https_proxy=`echo $https_proxy` --network=host -f Dockerfile .
.. note::
In the above mentioned ``docker build`` command, http_proxy & https_proxy arguments needs to
sudo docker exec -ti <CONTAINER ID> /bin/bash
+When both collectd and InfluxDB containers are located
+on the same host, then no additional configuration have to be added and you
+can proceed directly to `Run the Grafana docker image`_ section.
+
+Modify collectd to support InfluxDB on another host
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+If InfluxDB and collectd containers are located on separate hosts, then
+additional configuration have to be done in ``collectd`` container - it
+normally sends data using network plugin to 'localhost/127.0.0.1' therefore
+changing output location is required:
+
+1. Stop and remove running bar-collectd container (if it is running)
+
+ .. code:: bash
+
+ $ sudo docker ps #to get collectd container name
+ $ sudo docker rm -f <COLLECTD_CONTAINER_NAME>
+
+2. Go to location where shared collectd config files are stored
+
+ .. code:: bash
+
+ $ cd <BAROMETER_REPO_DIR>
+ $ cd src/collectd/collectd_sample_configs
+
+3. Edit content of ``network.conf`` file.
+ By default this file looks like that:
+
+ .. code::
+
+ LoadPlugin network
+ <Plugin network>
+ Server "127.0.0.1" "25826"
+ </Plugin>
+
+ ``127.0.0.1`` string has to be replaced with the IP address of host where
+ InfluxDB container is running (e.g. ``192.168.121.111``). Edit this using your
+ favorite text editor.
+
+4. Start again collectd container like it is described in
+ `Run the collectd docker image`_ chapter
+
+ .. code:: bash
+
+ $ cd <BAROMETER_REPO_DIR>
+ $ sudo docker run -ti --name bar-collectd --net=host -v \
+ `pwd`/src/collectd/collectd_sample_configs:/opt/collectd/etc/collectd.conf.d \
+ -v /var/run:/var/run -v /tmp:/tmp --privileged opnfv/barometer-collectd
+
+Now collectd container will be sending data to InfluxDB container located on
+remote Host pointed by IP configured in step 3.
+
Run the Grafana docker image
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Connect to <host_ip>:3000 with a browser and log into grafana: admin/admin
+Cleanup of influxdb/grafana configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When user wants to remove current grafana and influxdb configuration,
+folowing actions have to be performed
+
+1. Stop and remove running influxdb and grafana containers
+
+.. code:: bash
+
+ sudo docker rm -f bar-grafana bar-influxdb
+
+2. Remove shared influxdb and grafana folders from the Host
+
+.. code:: bash
+
+ sudo rm -rf /var/lib/grafana
+ sudo rm -rf /var/lib/influxdb
+
+.. note::
+ Shared folders are storing configuration of grafana and influxdb
+ containers. In case of changing influxdb or grafana configuration
+ (e.g. moving influxdb to another host) it is good to perform cleanup
+ on shared folders to not affect new setup with an old configuration.
Build and Run VES and Kafka Docker Images
------------------------------------------
wide metrics that are collected by barometer-ves container.
Setup instructions are located in: :ref:`Setup VES Test Collector`
-Build and Run LocalAgent and Redis Docker Images
+Build and Run DMA and Redis Docker Images
-----------------------------------------------------
-Download LocalAgent docker images
+Download DMA docker images
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-If you wish to use pre-built barometer project's LocalAgent images, you can pull the
-images from https://hub.docker.com/r/opnfv/barometer-localagent/
+If you wish to use pre-built barometer project's DMA images, you can pull the
+images from https://hub.docker.com/r/opnfv/barometer-dma/
.. note::
- If your preference is to build images locally please see sections `Build LocalAgent Docker Image`_
+ If your preference is to build images locally please see sections `Build DMA Docker Image`_
.. code:: bash
- $ docker pull opnfv/barometer-localagent
+ $ docker pull opnfv/barometer-dma
.. note::
If you have pulled the pre-built images there is no requirement to complete steps outlined
- in sections `Build LocalAgent Docker Image`_ and you can proceed directly to section
- `Run LocalAgent Docker Image`_
+ in sections `Build DMA Docker Image`_ and you can proceed directly to section
+ `Run DMA Docker Image`_
-Build LocalAgent docker image
+Build DMA docker image
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Build LocalAgent docker image:
+Build DMA docker image:
.. code:: bash
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note::
- Before running LocalAgent, Redis must be running.
+ Before running DMA, Redis must be running.
Run Redis docker image:
sudo docker ps
-Run LocalAgent docker image
+Run DMA docker image
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note::
-Run LocalAgent docker image with default configuration
+Run DMA docker image with default configuration
.. code:: bash