====================================================================================================================
-OPNFV Installation instruction for the AArch64 Brahmaputra 3.0 release of OPNFV when using Fuel as a deployment tool
+OPNFV Installation instruction for the AArch64 Colorado 1.0 release of OPNFV when using Fuel as a deployment tool
====================================================================================================================
License
Abstract
========
-This document describes how to install the Brahmaputra 3.0 release of
+This document describes how to install the Colorado 1.0 release of
OPNFV when using Fuel as a deployment tool, with an AArch64 (only) target
node pool.
============
This document provides guidelines on how to install and
-configure the Brahmaputra 3.0 release of OPNFV when using Fuel as a
+configure the Colorado 1.0 release of OPNFV when using Fuel as a
deployment tool, with an AArch64 (only) target node pool,
including required software and hardware configurations.
freedom in how the system is set-up, including architecture, services
and features, etc., said permutations may not provide an OPNFV
compliant reference architecture. This instruction provides a
-step-by-step guide that results in an OPNFV Brahmaputra compliant
+step-by-step guide that results in an OPNFV Colorado compliant
deployment.
The audience of this document is assumed to have good knowledge in
Preface
=======
-Before starting the installation of the AArch64 Brahmaputra 3.0 release of
+Before starting the installation of the AArch64 Colorado 1.0 release of
OPNFV, using Fuel as a deployment tool, some planning must be
done.
------------------------
First of all, the Fuel deployment ISO image needs to be retrieved, the
-ArmbandFuel .iso image of the AArch64 Brahmaputra release can be found
+ArmbandFuel .iso image of the AArch64 Colorado release can be found
at *Reference: 2*
Building the ISO image
Alternatively, you may build the ArmbandFuel .iso from source by cloning the
opnfv/armband git repository. To retrieve the repository for the AArch64
-Brahmaputra 3.0 release use the following command:
+Colorado 1.0 release use the following command:
.. code-block:: bash
$ git clone https://gerrit.opnfv.org/gerrit/armband
-Check-out the Brahmaputra release tag to set the HEAD to the
-baseline required to replicate the Brahmaputra release:
+Check-out the Colorado release tag to set the HEAD to the
+baseline required to replicate the Colorado release:
.. code-block:: bash
- $ git checkout brahmaputra.3.0
+ $ git checkout colorado.1.0
Go to the armband directory and build the .iso:
=====================
The following minimum hardware requirements must be met for the
-installation of AArch64 Brahmaputra 3.0 using Fuel:
+installation of AArch64 Colorado 1.0 using Fuel:
+--------------------+------------------------------------------------------+
| **HW Aspect** | **Requirement** |
| **Disk** | Minimum 256GB 10kRPM spinning disks |
| | |
+--------------------+------------------------------------------------------+
+| **Firmware** | UEFI compatible (e.g. EDK2) with PXE support |
++--------------------+------------------------------------------------------+
| **Networks** | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE) |
| | |
| | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network |
infrastructure as well as the provider networks and the private tenant
VLANs needs to be manually configured.
-Manual configuration of the Brahmaputra hardware platform should
+Manual configuration of the Colorado hardware platform should
be carried out according to the OPNFV Pharos specification:
-<https://wiki.opnfv.org/pharos/pharos_specification>
+<https://wiki.opnfv.org/display/pharos/Pharos+Specification>
OPNFV Software installation and deployment
==========================================
Install Fuel master
-------------------
-#. Mount the Brahmaputra Fuel ISO file/media as a boot device to the jump host server.
+#. Mount the Colorado Fuel ISO file/media as a boot device to the jump host server.
#. Reboot the jump host to establish the Fuel server.
.. figure:: img/fuelmenu4.png
+#. **DO NOT CHANGE** anything in "Bootstrap Image" section (see figure below).
-#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section (see figure below), edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
-
- - Navigate to "HTTP proxy" and enter your http proxy address
+ In ArmbandFuel@OPNFV, this data is **NOT** actually used for bootstrap
+ image building. Any change here will replace the configuration from
+ the OPNFV bootstrap build scripts and will lead to a failed bootstrap
+ image build.
- - Select <Check> and press [Enter]
+ **NOTE:** Cannot be used in tandem with local repository support.
.. figure:: img/fuelmenu5.png
#. Start the installation.
- - Select Quit Setup and press Save and Quit.
+ - Press <F8> or select Quit Setup and press Save and Quit.
- Installation starts, wait until the login screen is shown.
Compute/Control/Storage blades (nested or real) with a PXE booting
scheme so that the FUEL Master can pick them up for control.
+**NOTE**: AArch64 target nodes are expected to support PXE booting an
+EFI binary, i.e. an EFI-stubbed GRUB2 bootloader.
+
+**NOTE**: UEFI (EDK2) firmware is **highly** recommended, becoming
+the **de facto** standard for ARMv8 nodes.
+
#. Enable PXE booting
- - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
+ - For every controller and compute server: enable PXE Booting as the first boot device in the UEFI (EDK2) boot order menu and hard disk as the second boot device in the same menu.
#. Reboot all the control and compute blades.
Plugin ....... was successfully installed.
- **NOTE**: AArch64 Brahmaputra 3.0 ships only with Opendaylight plugin,
+ **NOTE**: Not all plugins are ported to AArch64 Colorado 1.0
see *Reference 15*.
.. figure:: img/plugin_install.png
.. figure:: img/newenv.png
-#. Select "<Liberty on Ubuntu 14.04 (aarch64)>" and press <Next>
+#. Select "<Mitaka on Ubuntu 14.04 (aarch64)>" and press <Next>
#. Select "compute virtulization method".
- Enable and configure the plugins of your choice
- .. figure:: img/plugins.png
+ .. figure:: img/plugins_aarch64.png
Allocate nodes to environment and assign functional roles
---------------------------------------------------------
OPTIONAL - UNTESTED - Set Local Mirror Repos
---------------------------------
-**NOTE**: AArch64 Brahmaputra 3.0 does not fully support local Ubuntu mirrors,
+**NOTE**: AArch64 Colorado 1.0 does not fully support local Ubuntu mirrors,
or at least does not ship with arm64 packages in local repos by default.
In order to use local (partial) Ubuntu mirrors, one should add arm64 packages
by hand to the existing amd64 mirrors and re-generate repo metadata.
- "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
- - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
+ - "mos" URI="deb http://<ip-of-fuel-server>::8080/mitaka-8.0/ubuntu/x86_64 mos8.0 main restricted"
- - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
+ - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/mitaka-8.0/ubuntu/auxiliary auxiliary main restricted"
- Click <Save Settings> at the bottom to Save your changes
OpenStack
---------
-3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+3) `OpenStack Mitaka Release artifacts <http://www.openstack.org/software/mitaka>`_
4) `OpenStack documentation <http://docs.openstack.org>`_
----
6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
-7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/>`_
+7) `Fuel documentation overview <https://docs.mirantis.com/openstack/fuel/fuel-9.0>`_
-8) `Fuel planning guide <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/mos-planning-guide.html>`_
+8) `Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-9.0/mos-planning-guide.html>`_
-9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/quickstart-guide.html>`_
+9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-9.0/quickstart-guide.html>`_
-10) `Fuel operations guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/operations.html>`_
+10) `Fuel user guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-user-guide.html>`_
11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
Fuel in OPNFV
-------------
-13) `OPNFV Installation instruction for the AArch64 Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/brahmaputra/docs/installation-instruction.html>`_
+13) `OPNFV Installation instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/docs/installation-instruction.html>`_
-14) `OPNFV Build instruction for the AArch64 Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/brahmaputra/docs/build-instruction.html>`_
+14) `OPNFV Build instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/docs/build-instruction.html>`_
-15) `OPNFV Release Note for the AArch64 Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/brahmaputra/docs/release-notes.html>`_
+15) `OPNFV Release Note for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/docs/release-notes.html>`_