Use launcher.py to deploy and clean up example environments. These examples are described in YAML files.
-#. Add your OpenStack connection information to the deploy-complex-network.yaml.
+#. Add your OpenStack connection information.
- Edit <path to repo>/examples/complex-network/deploy-complex-network.yaml
+ Edit <path to repo>/examples/inst-w-volume/deploy-env.yaml with your OpenStack
+ credentials and authorization URL
- openstack: the top level tag that denotes configuration for the OpenStack components
- auth\_url: - the URL to the OpenStack APIs (required)
- project\_name: - the name of the OpenStack project for the user
(required)
- - http\_proxy: - the {{ host }}:{{ port }} of the proxy server the
- HTTPPhotoman01(optional)
+ - http\_proxy: - the {{ host }}:{{ port }} of the proxy server (optional)
#. Go to the examples directory.
::
- cd <snaps repo>/examples/
+ cd <snaps repo>/examples/
#. Deploy the launcher.
::
- $ python launcher.py -e ./complex-network/deploy-complex-network.yaml -d
+ python launch.py -t ./inst-w-volume/deploy-vm-with-volume.yaml -e ./inst-w-volume/deploy-env.yaml -d
#. Clean the deployment.
::
- $ python launcher.py -e ./complex-network/deploy-complex-network.yaml -c
+ python launch.py -t ./complex-network/deploy-complex-network.yaml -e ./inst-w-volume/deploy-env.yaml -c
#. Customize the deployment by changing the yaml file.
- openstack: the top level tag that denotes configuration for the
OpenStack components
- - connection: - contains the credentials and endpoints required to
- connect with OpenStack
- - username: - the project's user (required)
- - password: - the tentant's user password (required)
- - auth\_url: - the URL to the OpenStack APIs (required)
- - project\_name: - the name of the OpenStack project for the user
- (required)
- - http\_proxy: - the {{ host }}:{{ port }} of the proxy server the
- HTTPPhotoman01(optional)
- - images: - describes each image
- - image:
-
- - name: The unique image name. If the name already exists for
- your project, a new one will not be created (required)
- - format: The format type of the image i.e. qcow2 (required)
- - download\_url: The HTTP download location of the image file
- (required)
- - nic\_config\_pb\_loc: The file location relative to the CWD
- (python directory) to the Ansible Playbook used to configure
- VMs with more than one port. VMs get their first NIC configured
- for free while subsequent ones are not. This value/script will
- only be leveraged when necessary. Centos has been supported
- with
- "provisioning/ansible/centos-network-setup/configure\_host.yml".
+ - connections: the different connections/credentials to be used by the
+ launcher application
+
+ - connection: the credentials and endpoints required to connect to an
+ OpenStack project/tenant
+
+ - name: the name of the credentials for use when creating objects (required)
+ - username: the project's user (required)
+ - password: the tentant's user password (required)
+ - auth\_url: the URL to the OpenStack APIs (required)
+ - project\_name: the name of the OpenStack project for the user
+ (required)
+ - identity\_api\_version: the Keystone client version to use (default = 2)
+ - image\_api\_version: the Glance client version to use (default = 2)
+ - network\_api\_version: the Neutron client version to use (default = 2)
+ - compute\_api\_version: the Nova client version to use (default = 2)
+ - heat\_api\_version: the Heat client version to use (default = 1)
+ - volume\_api\_version: the Cinder client version to use (default = 2)
+ - user\_domain\_id: the user domain ID to use (default = 'default')
+ - user\_domain\_name: the user domain name to use (default = 'Default')
+ - project\_domain\_id: the project domain ID to use (default = 'default')
+ - project\_domain\_name: the project domain name to use (default = 'Default')
+ - interface: Used to specify the endpoint type for keystone (default = 'public')
+ - cacert: True for https or the certification file location (default = False)
+ - region\_name: the region (default = None)
+ - proxy\_settings: for accessing APIs hidden behind an HTTP proxy
+
+ - host: hostname or IP of HTTP proxy host (required)
+ - port: port number of the HTTP proxy server (required)
+ - http\_host: hostname or IP of HTTPS proxy host (default = host)
+ - port: port number of the HTTPS proxy server (default = port)
+ - ssh\_proxy\_cmd: the OpenSSH command used to access the SSH port
+ of a VM (optional)
+
+ - projects: the projects/tenants to create
+
+ - project: a project/tenant to create (admin user credentials required)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - name: the project's name (required)
+ - domain or domain_name: the project's domain name (default = 'Default')
+ - description: the description (optional)
+ - users: a list of users to associate to the project (optional)
+ - enabled: when True the project will be enabled on creation (default = True)
+
+ - users: the users to create
+
+ - user: a user to create (admin user credentials required)
+
+ - os\_creds\_name: the connection name (required)
+ - name: the username (required)
+ - password: the user's password (required)
+ - project\_name: the user's primary project name (optional)
+ - domain\_name: the user's domain name (default = 'Default')
+ - email: the user's email address (optional)
+ - roles: dict where key is the role's name and value is the name
+ of the project to associate with the role (optional)
+
+ - flavors: the flavors to create
+
+ - flavor: a flavor to create (admin user credentials required)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - name: the name (required)
+ - flavor\_id: the string ID (default 'auto')
+ - ram: the required RAM in MB (required)
+ - disk: the size of the root disk in GB (required)
+ - vcpus: the number of virtual CPUs (required)
+ - ephemeral: the size of the ephemeral disk in GB (default 0)
+ - swap: the size of the dedicated swap disk in GB (default 0)
+ - rxtx\_factor: the receive/transmit factor to be set on ports if
+ backend supports QoS extension (default 1.0)
+ - is\_public: denotes whether or not the flavor is public (default = True)
+ - metadata: freeform dict() for special metadata (optional)
+
+ - qos_specs: the QoS Specs to create
+
+ - qos_spec: a QoS Spec to create (admin user credentials required)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - name: the name (required)
+ - consumer: enumerations: 'front-end', 'back-end', 'both' (required)
+ - specs: dict of custom values (optional)
+
+ - volume_types: the Volume Type to create
+
+ - volume_type: a Volume Type to create (admin user credentials required)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - name: the name (required)
+ - description: the description (optional)
+ - qos_spec_name: the name of the associate QoS Spec (optional)
+ - public: visibility (default - False)
+ - encryption: the encryption settings (optional)
+
+ - name: the name (required)
+ - provider_class: the provider class (required i.e. LuksEncryptor)
+ - control_location: enumerations: 'front-end', 'back-end' (required)
+ - cipher: the encryption algorithm/mode to use (optional)
+ - key_size: the size of the encryption key, in bits (optional)
+
+ - volumes: the Volume to create
+
+ - volume: a Volume to create
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: the name (required)
+ - description: the description (optional)
+ - size: the volume size in GB (default = 1)
+ - image_name: the image name to leverage (optional)
+ - type_name: the volume type name to associate (optional)
+ - availability_zone: the zone name on which to deploy (optional)
+ - multi_attach: when true, volume can be attached to more than one VM
+ (default = False)
+
+ - images: describes each image to create
+
+ - image:
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The unique image name. If the name already exists for
+ your project, a new one will not be created (required)
+ - image\_user: the image's default sudo user (required)
+ - format or img\_format: the image format type (required i.e. qcow2)
+ - url or download\_url: The HTTP download location of the image file
+ (required when "image_file" below has not been configured)
+ - image\_file: the image file location (required when "url" has not
+ been configured)
+ - kernel\_image\_settings: the settings for a kernel image (optional)
+ - ramdisk\_image\_settings: the settings for a kernel image (optional)
+ - public: publically visibile when True (default = True)
- networks:
- - network:
-
- - name: The name of the network to be created. If one already
- exists, a new one will not be created (required)
- - admin\_state\_up: T\|F (default True)
- - shared: (optional)
- - project\_name: Name of the project who owns the network. Note:
- only administrative users can specify projects other than their
- own (optional)
- - external: T\|F whether or not network is external (default
- False)
- - network\_type: The type of network to create. (optional)
- - subnets:
- - subnet:
-
- - name: The name of the network to be created. If one already
- exists, a new one will not be created. Note: although
- OpenStack allows for multiple subnets to be applied to any
- given network, we have not included support as our current
- use cases does not utilize this functionality (required)
- - cidr: The subnet mask value (required)
- - dns\_nameservers: A list of IP values used for DNS
- resolution (default: 8.8.8.8)
- - ip\_version: 4\|6 (default: 4)
- - project\_name: Name of the project who owns the network.
- Note: only administrative users can specify projects other
- than their own (optional)
- - start: The start address for allocation\_pools (optional)
- - end: The ending address for allocation\_pools (optional)
- - gateway\_ip: The IP address to the gateway (optional)
- - enable\_dhcp: T\|F (optional)
- - dns\_nameservers: List of DNS server IPs
- - host\_routes: A list of host route dictionaries (optional)
- i.e.:
- ``yaml "host_routes":[ { "destination":"0.0.0.0/0", "nexthop":"123.456.78.9" }, { "destination":"192.168.0.0/24", "nexthop":"192.168.0.1" } ]``
- - destination: The destination for a static route (optional)
- - nexthop: The next hop for the destination (optional)
- - ipv6\_ra\_mode: Valid values: "dhcpv6-stateful",
- "dhcpv6-stateless", and "slaac" (optional)
- - ipv6\_address\_mode: Valid values: "dhcpv6-stateful",
- "dhcpv6-stateless", and "slaac" (optional)
+ - network:
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The name of the network to be created. If one already
+ exists, a new one will not be created (required)
+ - admin\_state\_up: T\|F (default True)
+ - shared: (optional)
+ - project\_name: Name of the project who owns the network. Note:
+ only administrative users can specify projects other than their
+ own (optional)
+ - external: T\|F whether or not network is external (default False)
+ - network\_type: The type of network to create (optional)
+ - physical\_network: the name of the physical network
+ (required when network_type is 'flat')
+ - segmentation\_id: the id of the segmentation
+ (required when network_type is 'vlan')
+ - subnets:
+ - subnet:
+
+ - name: The name of the network to be created. If one already
+ exists, a new one will not be created. Note: although
+ OpenStack allows for multiple subnets to be applied to any
+ given network, we have not included support as our current
+ use cases does not utilize this functionality (required)
+ - cidr: The subnet mask value (required)
+ - dns\_nameservers: A list of IP values used for DNS
+ resolution (default: 8.8.8.8)
+ - ip\_version: 4\|6 (default: 4)
+ - project\_name: Name of the project who owns the network.
+ Note: only administrative users can specify projects other
+ than their own (optional)
+ - start: The start address for allocation\_pools (optional)
+ - end: The ending address for allocation\_pools (optional)
+ - gateway\_ip: The IP address to the gateway (optional)
+ - enable\_dhcp: T\|F (optional)
+ - dns\_nameservers: List of DNS server IPs (default = ['8.8.8.8']
+ - host\_routes: A list of host route dictionaries (optional)
+ i.e.:
+ ``yaml "host_routes":[ { "destination":"0.0.0.0/0", "nexthop":"123.456.78.9" }, { "destination":"192.168.0.0/24", "nexthop":"192.168.0.1" } ]``
+ - destination: The destination for a static route (optional)
+ - nexthop: The next hop for the destination (optional)
+ - ipv6\_ra\_mode: Valid values: "dhcpv6-stateful",
+ "dhcpv6-stateless", and "slaac" (optional)
+ - ipv6\_address\_mode: Valid values: "dhcpv6-stateful",
+ "dhcpv6-stateless", and "slaac" (optional)
+
+ - security_groups:
+
+ - security_group:
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The name of the security group to be created (required)
+ - description: The security group's description (optional)
+ - project\_name: Name of the project who owns the security group (optional)
+ - rule\_settings: List of rules to place onto security group (optional)
+
+ - description: the rule's description (optional)
+ - protocol: rule's protcol ('icmp' or 'tcp' or 'udp' or 'null')
+ - ethertype: rule's ethertype ('4' or '6')
+ - port\_range\_min: The minimum port number in the range that is
+ matched by the security group rule. When the protocol is 'tcp'
+ or 'udp', this value must be <= 'port_range_max' (optional)
+ - port\_range\_max: The maximum port number in the range that is
+ matched by the security group rule. When the protocol is 'tcp'
+ or 'udp', this value must be <= 'port_range_max' (optional)
+ - remote\_ip\_prefix: The remote IP prefix to associate with this
+ metering rule packet (optional)
- routers:
- router:
- - name: The name of the router to be created. If one already
- exists, a new one will not be created (required)
- - project\_name: Name of the project who owns the network. Note:
- only administrative users can specify projects other than their
- own (optional)
- - internal\_subnets: A list of subnet names on which the router
- will be placed (optional)
- - external\_gateway: A dictionary containing the external gateway
- parameters: "network\_id", "enable\_snat",
- "external\_fixed\_ips" (optional)
- - interfaces: A list of port interfaces to create to other
- subnets (optional)
-
- - port (Leverages the same class/structure as port objects on
- VM instances. See port definition below for a
- full accounting of the port attributes. The ones listed
- below are generally used for routers)
-
- - name: The name given to the new port (must be unique for
- project) (required)
- - network\_name: The name of the new port's network
- (required)
- - ip\_addrs: A list of k/v pairs (optional)
- - subnet\_name: the name of a subnet that is on the port's
- network
- - ip: An IP address of the associated subnet to assign to
- the new port (optional but generally required for router
- interfaces)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The name of the router to be created (required)
+ - project\_name: Name of the project who owns the network (optional)
+ - external\_gateway: Name of the external network to which to route
+ (optional)
+ - admin\_state\_up: T\|F (default True)
+ - external\_fixed\_ids: Dictionary containing the IP address
+ parameters (optional)
+ - internal\_subnets: List of subnet names to which to connect this
+ router (optional)
+
+ - port_settings (Leverages the same class/structure as port objects on
+ VM instances. See port definition below for a
+ full accounting of the port attributes. The ones listed
+ below are generally used for routers)
+
+ - name: The name given to the new port (required and must be
+ unique for project)
+ - network\_name: The name of the network on which to create
+ the port (optional)
+ - admin\_state\_up: T\|F (default True)
+ - project\_name: Name of the project who owns the network (optional)
+ - mac\_address: The port's MAC address (optional)
+ - ip\_addrs: A list of k/v pairs (optional)
+ - security\_groups: a list of names of the the security groups
+ to apply to the port
+ - opt\_value: The extra DHCP option value (optional)
+ - opt\_name: The extra DHCP option name (optional)
- keypairs:
- keypair:
- - name: The name of the keypair to be created. If one already
- exists, a new one will not be created but simply loaded from
- its configured file location (required)
- - public\_filepath: The path to where the generated public key
- will be stored if it does not exist (optional but really
- required for provisioning purposes)
- - private\_filepath: The path to where the generated private key
- will be stored if it does not exist (optional but really
- required for provisioning purposes)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The name of the keypair to be created. If one already
+ exists, a new one will not be created but simply loaded from
+ its configured file location (required)
+ - public\_filepath: The path to where the generated public key
+ will be stored if it does not exist (optional but really
+ required for provisioning purposes)
+ - private\_filepath: The path to where the generated private key
+ will be stored if it does not exist (optional but really
+ required for provisioning purposes)
- instances:
- instance:
- - name: The unique instance name for project. (required)
- - flavor: Must be one of the preconfigured flavors (required)
- - imageName: The name of the image to be used for deployment
- (required)
- - keypair\_name: The name of the keypair to attach to instance
- (optional but required for NIC configuration and Ansible
- provisioning)
- - sudo\_user: The name of a sudo\_user that is attached to the
- keypair (optional but required for NIC configuration and
- Ansible provisioning)
- - vm\_boot\_timeout: The number of seconds to block waiting for
- an instance to deploy and boot (default 900)
- - vm\_delete\_timeout: The number of seconds to block waiting for
- an instance to be deleted (default 300)
- - ssh\_connect\_timeout: The number of seconds to block waiting
- for an instance to achieve an SSH connection (default 120)
- - ports: A list of port configurations (should contain at least
- one)
- - port: Denotes the configuration of a NIC
-
- - name: The unique port name for project (required)
- - network\_name: The name of the network to which the port is
- attached (required)
- - ip\_addrs: Static IP addresses to be added to the port by
- subnet (optional)
- - subnet\_name: The name of the subnet
- - ip: The assigned IP address (when null, OpenStack will
- assign an IP to the port)
- - admin\_state\_up: T\|F (default True)
- - project\_name: The name of the project who owns the network.
- Only administrative users can specify a the project ID other
- than their own (optional)
- - mac\_address: The desired MAC for the port (optional)
- - fixed\_ips: A dictionary that allows one to specify only a
- subnet ID, OpenStack Networking allocates an available IP
- from that subnet to the port. If you specify both a subnet
- ID and an IP address, OpenStack Networking tries to allocate
- the specified address to the port. (optional)
- - seurity\_groups: A list of security group IDs (optional)
- - allowed\_address\_pairs: A dictionary containing a set of
- zero or more allowed address pairs. An address pair contains
- an IP address and MAC address. (optional)
- - opt\_value: The extra DHCP option value (optional)
- - opt\_name: The extra DHCP option name (optional)
- - device\_owner: The ID of the entity that uses this port. For
- example, a DHCP agent (optional)
- - device\_id: The ID of the device that uses this port. For
- example, a virtual server (optional)
-
- - floating\_ips: list of floating\_ip configurations (optional)
-
- - floating\_ip:
- - name: Must be unique for VM instance (required)
- - port\_name: The name of the port requiring access to the
- external network (required)
- - subnet\_name: The name of the subnet contains the IP address on
- the port on which to create the floating IP (optional)
- - router\_name: The name of the router connected to an external
- network used to attach the floating IP (required)
- - provisioning: (True\|False) Denotes whether or not this IP can
- be used for Ansible provisioning (default True)
+
+ - os\_creds\_name: the connection name (default = 'default'
+ required or use "os\_user" below instead)
+ - os\_user: the connection from a new user defined in template
+ (required or use "os\_creds\_name" above
+
+ - name: the user's name (required)
+ - project\_name: the project name to use
+
+ - name: The unique instance name for project. (required)
+ - flavor: Must be one of the preconfigured flavors (required)
+ - imageName: The name of the image to be used for deployment
+ (required)
+ - keypair\_name: The name of the keypair to attach to instance
+ (optional but required for NIC configuration and Ansible
+ provisioning)
+ - sudo\_user: The name of a sudo\_user that is attached to the
+ keypair (optional but required for NIC configuration and
+ Ansible provisioning)
+ - vm\_boot\_timeout: The number of seconds to block waiting for
+ an instance to deploy and boot (default 900)
+ - vm\_delete\_timeout: The number of seconds to block waiting for
+ an instance to be deleted (default 300)
+ - ssh\_connect\_timeout: The number of seconds to block waiting
+ for an instance to achieve an SSH connection (default 120)
+ - ports: A list of port configurations (should contain at least
+ one)
+ - port: Denotes the configuration of a NIC
+
+ - name: The unique port name for project (required)
+ - network\_name: The name of the network to which the port is
+ attached (required)
+ - ip\_addrs: Static IP addresses to be added to the port by
+ subnet (optional)
+ - subnet\_name: The name of the subnet
+ - ip: The assigned IP address (when null, OpenStack will
+ assign an IP to the port)
+ - admin\_state\_up: T\|F (default True)
+ - project\_name: The name of the project who owns the network.
+ Only administrative users can specify a the project ID other
+ than their own (optional)
+ - mac\_address: The desired MAC for the port (optional)
+ - fixed\_ips: A dictionary that allows one to specify only a
+ subnet ID, OpenStack Networking allocates an available IP
+ from that subnet to the port. If you specify both a subnet
+ ID and an IP address, OpenStack Networking tries to allocate
+ the specified address to the port. (optional)
+ - seurity\_groups: A list of security group IDs (optional)
+ - allowed\_address\_pairs: A dictionary containing a set of
+ zero or more allowed address pairs. An address pair contains
+ an IP address and MAC address. (optional)
+ - opt\_value: The extra DHCP option value (optional)
+ - opt\_name: The extra DHCP option name (optional)
+ - device\_owner: The ID of the entity that uses this port. For
+ example, a DHCP agent (optional)
+ - device\_id: The ID of the device that uses this port. For
+ example, a virtual server (optional)
+
+ - floating\_ips: list of floating\_ip configurations (optional)
+
+ - floating\_ip:
+ - name: Must be unique for VM instance (required)
+ - port\_name: The name of the port requiring access to the
+ external network (required)
+ - subnet\_name: The name of the subnet contains the IP address on
+ the port on which to create the floating IP (optional)
+ - router\_name: The name of the router connected to an external
+ network used to attach the floating IP (required)
+ - provisioning: (True\|False) Denotes whether or not this IP can
+ be used for Ansible provisioning (default True)
- ansible: Each set of attributes below are contained in a list
Code Review / snaps.git / blobdiff