Introduction
============
-This document describes how feature projects aiming to run functional tests can
-be integrated into FuncTest framework.
+Functest is a project dealing with functional testing.
+Functest produces its own internal test cases but can also be considered
+as a framework to support feature project testing suite integration.
+Functest developed a test API and defined a Test collection framework
+that can be used by any OPNFV project.
+
+Therefore there are many ways to contribute to Functest. You can:
+
+ * develop new internal test cases
+ * integrate the tests from your feature project
+ * develop the framework to ease the integration of external test cases
+ * develop the API / Test collection framework
+ * develop dashboards or automatic reporting portals
+
+This document describes how, as a developer, you may interact with the
+Functest project. The first section details the main working areas of
+the project. The Second part is a list of "How to" to help you to join
+the Functest family whatever your field of interest is.
+
+
+========================
+Functest developer areas
+========================
-================================
Functest High level architecture
================================
| |
+----------------------+
-Functest deals with internal and external test cases.
-The Internal test cases in Brahmaputra are:
-
- * vPing_SSH
- * vPing_userdata
- * ODL
- * Tempest
- * vIMS
- * Rally
-
+Functest internal test cases
+============================
+The internal test cases in Colorado are:
+
+ * vping_ssh
+ * vping_userdata
+ * odl
+ * tempest_smoke_serial
+ * rally_sanity
+ * tempest_full_parallel
+ * rally_full
+ * vims
+
+By internal, we mean that this particular test cases have been
+developped by functest contributors and the associated code is hosted in
+the Functest repository.
+The structure of this repository is detailed in `[1]`_.
+The main internal test cases are int the testcases subfolder of the
+repository, the internal test cases are:
+
+ * Controllers: odl, onos
+ * OpenStack: vping_ssh, vping_userdata, tempest_*, rally_*
+ * vIMS: vims
+
+If you want to create a new test cases you will have to create a new
+folder under the testcases directory
+
+Functest external test cases
+============================
The external tescases are:
- * Promise
- * Doctor
- * Onos
- * BGPVPN
-
-see `[2]`_ for details.
-
-Functest can also be considered as a framework that may include external OPNFV
-projects.
-This framework will ease the integration of the feature test suite to the CI.
-
-==================
-How Functest works
-==================
-
-The installation and the launch of the Functest docker image is described in
-`[1]`_.
-
-The Functest docker directories are::
-
- home
- |
- `-- opnfv
- |-- functest
- | |-- conf
- | |-- data
- | `-- results
- `-- repos
- |-- bgpvpn
- |-- doctor
- |-- functest
- |-- odl_integration
- |-- onos
- |-- ovno
- |-- promise
- |-- rally
- |-- releng
- `-- vims-test
-
-::
-
- +-----------+-------------------+---------------------------------------------+
- | Directory | Subdirectory | Comments |
- +-----------+-------------------+---------------------------------------------+
- | | <project>/conf | All the useful configuration file(s) for |
- | | | <project> the openstack creds are put there |
- | | | for CI |
- | | | It is recommended to push it there when |
- | | | passing the credentials to container through|
- | | | the -v option |
- | +-------------------+---------------------------------------------+
- | opnfv | <project>/data | Usefull data, images for <projects> |
- | | | By default we put a cirros image: |
- | | | cirros-0.3.4-x86_64-disk.img |
- | | | This image can be used by any projects |
- | +-------------------+---------------------------------------------+
- | | <project>/results | Local result directory of project <project> |
- +-----------+-------------------+---------------------------------------------+
- | | bgpvpn | |
- | +-------------------+ +
- | repos | doctor | |
- | +-------------------+ +
- | | functest | |
- | +-------------------+ +
- | | odl_integration | |
- | +-------------------+ Clone of the useful repositories +
- | | onos | These repositories may include: |
- | +-------------------+ - tooling +
- | | promise | - scenario |
- | +-------------------+ - scripts +
- | | rally | |
- | +-------------------+ +
- | | releng | |
- | +-------------------+ +
- | | vims-test | |
- | +-------------------+ +
- | | <your project> | |
- +-----------+-------------------+---------------------------------------------+
-
-Before running the test suite, you must prepare the environement by running::
-
- $ /home/opnfv/repos/functest/docker/prepare_env.sh
-
-By running prepare_env.sh, you build the test environement required by the tests
-including the retrieval and sourcing of OpenStack credentials.
-This is an example of the env variables we have in the docker container:
-
- * HOSTNAME=373f77816eb0
- * INSTALLER_TYPE=fuel
- * repos_dir=/home/opnfv/repos
- * INSTALLER_IP=10.20.0.2
- * PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
- * PWD=/home/opnfv
- * SHLVL=1
- * HOME=/home/opnfv
- * NODE_NAME=opnfv-jump-2
- * creds=/home/opnfv/functest/conf/openstack.creds
- * _=/usr/bin/env
-
-The prepare_env.sh will source the credentials, so once run you should have
-access to the following env variables::
-
- root@373f77816eb0:~# env|grep OS_
- OS_REGION_NAME=RegionOne
- OS_PROJECT_NAME=admin
- OS_PASSWORD=admin
- OS_AUTH_STRATEGY=keystone
- OS_AUTH_URL=http://172.30.10.70:5000/v2.0
- OS_USERNAME=admin
- OS_TENANT_NAME=admin
- OS_ENDPOINT_TYPE=internalURL
- OS_NO_CACHE=true
-
-
-Then you may run the test suite by running::
-
- $ /home/opnfv/repos/functest/docker/run_tests.sh -t <your project>
-
-see `[2]`_ for details.
-
-
-
-=========================
-How to integrate Functest
-=========================
-
-The files of the Functest repository you must modify to integrate Functest are:
-
- * functest/docker/Dockerfile
- * functest/docker/common.sh
- * functest/docker/requirements.pip
- * functest/docker/run_tests.sh
- * functest/docker/prepare_env.sh
- * functest/config_funtest.yaml
-
-
-Dockerfile
-==========
-
-This file lists the repositories to be cloned in the Functest container.
-The repositories can be internal or external::
-
- RUN git clone https://gerrit.opnfv.org/gerrit/<your porject> ${repos_dir}/<your project>
-
-
-Common.sh
-==========
-
-This file can be used to declare the branch and commit variables of your
-projects::
-
- <YOUR_PROJECT>_BRANCH=$(cat $config_file | grep -w <your project>_branch | awk 'END {print $NF}')
- <YOUR_PROJECT>_COMMIT=$(cat $config_file | grep -w <your project>_commit | awk 'END {print $NF}')
-
- echo "<YOUR_PROJECT>_BRANCH=${<YOUR_PROJECT>_BRANCH}"
- echo "<YOUR_PROJECT>_COMMIT=${<YOUR_PROJECT>_COMMIT}"
-
-
-requirements.pip
-================
-
-This file can be used to preloaded all the needed Python libraries (and avoid
-that each project does it)
-The current libraries used in Functest container are::
-
- # cat requirements.pip
- pyyaml==3.10
- gitpython==1.0.1
- python-neutronclient==2.6.0
- python-novaclient==2.28.1
- python-glanceclient==1.1.0
- python-cinderclient==1.4.0
- python-ceilometerclient==1.5.1
- python-keystoneclient==1.6.0
- virtualenv==1.11.4
- pexpect==4.0
- requests==2.8.0
- robotframework==2.9.1
- robotframework-requests==0.3.8
- robotframework-sshlibrary==2.1.1
- configObj==5.0.6
- Flask==0.10.1
- xmltodict==0.9.2
- scp==0.10.2
- paramiko==1.16.0
-
-
-prepare_env.sh
-==============
+ * promise
+ * doctor
+ * onos
+ * bgpvpn
+ * copper
+ * moon
+ * security_scan
+ * sfc-odl
+ * sfc-onos
-This script can be adapted if you need to set up a specific environment before
-running the tests.
-run_tests.sh
-============
-
-This script is used to run the tests. You must thus complete the cases with your
-own project::
-
- ;;
- "promise")
- info "Running PROMISE test case..."
- # TODO
- ;;
- "doctor")
- info "Running Doctor test..."
- python ${FUNCTEST_REPO_DIR}/testcases/features/doctor.py
- ;;
- "<your project>")
- info "Running <your project> test..."
- # your script that launchs your tests...
- ;;
+Note that security_scan has been bootstraped in Functest but will be
+considered as an external test cases as soon as it will get its own
+repository.
-And do not forget to update also the help line::
+The code to run these test cases may be directly in the repository of
+the project. We have also a features sub directory under testcases
+directory that may be used (it can be usefull if you want to reuse
+Functest library).
- -t|--test run specific set of tests
- <test_name> one or more of the following separated by comma:
- vping_ssh,vping_userdata,odl,rally,tempest,vims,onos,promise,ovno
+Functest framework
+==================
-config_funtest.yaml
-===================
+Functest can be considered as a framework.
+Functest is release a a docker file, including tools, scripts and a CLI
+to prepare the environement and run tests.
+It simplifies the integration of external test suite in CI pipeline
+and provide commodity tools to collect and display results.
-This file is the main configuration file of Functest. You must add the
-references to your project::
+Since Colorado, test categories also known as tiers have been created to
+group similar tests, provide consistant sub-lists and at the end optimize
+test duration for CI (see How To section).
- general:
- directories:
- dir_repo_<your project>: /home/opnfv/repos/<your project>
- repositories:
- # branch and commit ID to which the repos will be reset (HEAD)
- <your project>_branch: master
- <your project>_commit: latest
+see `[2]`_ for details.
+Test API
+========
-====================
-Test Dashboard & API
-====================
+The OPNFV testing group created a test collection database to collect
+the test results from CI.
+Any test project running on any lab integrated in CI can push the
+results to this database.
+This database can be used afterwards to see the evolution of the tests
+and compare the results versus the installers, the scenario or the labs.
-The OPNFV testing group created a test collection database to collect the test
-results from CI.
-Any test project running on any lab integrated in CI can push the results to
-this database.
-This database can be used afterwards to see the evolution of the tests and
-compare the results versus the installers, the scenario or the labs.
-
-You can find more information about the dashboard from Testing Dashboard wiki
-page `[3]`_.
+You can find more information about the dashboard from Testing Dashboard
+wiki page `[3]`_.
Overall Architecture
====================
Test API description
====================
-The Test API is used to declare pods, projects, test cases and test results. An
-additional method dashboard has been added to post-process the raw results in release Brahmaputra.
+The Test API is used to declare pods, projects, test cases and test
+results. An additional method dashboard has been added to post-process
+the raw results in release Brahmaputra.
+
The data model is very basic, 4 objects are created:
* Pods
{
"id": <ID>,
"details": <URL description of the POD>,
- "creation_date": YYYY-MM-DD HH:MM:SS ,
+ "creation_date": "YYYY-MM-DD HH:MM:SS",
"name": <The POD Name>,
"mode": <metal or virtual>,
"role": <ci-pod or community-pod or single-node>
Results::
{
- "_id": <ID,
- "case_name": <Reference to the test case>
+ "_id": <ID>,
+ "case_name": <Reference to the test case>,
"project_name": <Reference to project>,
"pod_name": <Reference to POD where the test was executed>,
"installer": <Installer Apex or Compass or Fuel or Joid>,
"build_tag": <such as "jenkins-functest-fuel-baremetal-daily-master-108">,
"scenario": <Scenario on which the test was executed>,
"criteria": <PASS or FAILED>,
- "trust_indicator": <0 ~ 1>
+ "trust_indicator": <0~1>
+ }
The API can described as follows. For detailed information, please go to
http://testresults.opnfv.org/test/swagger/spec.html
Authentication: opnfv/api@opnfv
-Please notes that POST/DELETE/PUT operations for test or study purpose via
+Please notes that POST/DELETE/PUT operations for test or study purpose via
swagger website is not allowed, because it will change the real data in
the database.
| GET |/dashboard/v1/projects? | Get all the dashboard ready projects |
+--------+----------------------------+-----------------------------------------+
-Dashboard description
-=====================
+The code of the API is hosted in the releng repository `[6]`_.
+Dashboard
+=========
+
+Dashboard is used to provide a consistant view of the results collected
+in CI.
The results with dashboard method are post-processed from raw results.
-Please note that dashboard results are not stored. Only raw results are stored.
+Please note that dashboard results are not stored. Only raw results are
+stored.
Release Brahmaputra
-------------------
Release Colorado
----------------
+Since Colorado, it was decided to adopt ELK framework. Mongo DB results
+are extracted to feed Elasticsearch database (`[7]`_).
Dashboard url: http://testresults.opnfv.org/kibana_dashboards/
Credentials for a guest account: opnfvuser/kibana
-===============================================
+
+Automatic reporting
+===================
+
+OPNFV release is scenario centric. An automatic reporting page has been
+created in order to provide a consistant view of the scenarios.
+In this page each scenario is evaluated according to test criteria.
+The code for the automatic reporting is available at `[8]`_.
+
+Every day, we collect the results from the centralized database and, per
+scenario we calculate a score. This score is the addition of individual
+tests considered on the last 10 runs according to a defined criteria.
+
+If we consider for instance a scenario os-odl_l2-nofeature-ha, we will
+consider for the scoring all the runnable tests from the first test
+categories (tiers healthcheck, smoke, controller and feature)
+corresponding to this scenario.
+
+
+ +---------------------+---------+---------+---------+---------+
+ | Test | Apex | Compass | Fuel | Joid |
+ +=====================+=========+=========+=========+=========+
+ | vPing_ssh | X | X | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | vPing_userdata | X | X | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | tempest_smoke_serial| X | X | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | rally_sanity | X | X | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | odl | X | X | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | promise | | | X | X |
+ +---------------------+---------+---------+---------+---------+
+ | security_scan | X | | | |
+ +---------------------+---------+---------+---------+---------+
+ | copper | X | | | X |
+ +---------------------+---------+---------+---------+---------+
+
+All the testcases listed in the table are runnable on
+os-odl_l2-nofeature scenarios.
+If no results are available or if all the results are failed, the test
+case get 0 point.
+If it was succesfull at least once but no anymore during the 4 runs,
+the case get 1 point (it worked once).
+If at least 3 of the last 4 runs were successful, the case get 2 points.
+If the last 4 runs of the test are successful, the test get 3 points.
+
+In the example above, the target score for fuel/os-odl_l2-nofeature-ha
+is 3x6 = 18 points.
+
+The scenario is validated per installer when we got 3 points for all
+individual test cases (e.g 18/18).
+Please note that complex or long duration tests are not considered for
+the scoring. Such cases will be also get points, but these points will
+be indicative and not used for the scenario validation.
+
+A web page is automatically generated every day to display the status.
+This page can be found at `[9]`_. For the status, click on Status menu,
+you may also get feedback for vims and tempest_smoke_serial test cases.
+
+Any validated scenario is stored in a local file on the web server. In
+fact as we are using a sliding windows to get results, it may happen
+that a successfull scenarios is not more run (because considered as
+stable)and then the number of iterations (need 4) would not be
+sufficient to get the green status.
+
+Please note that other test cases e.g. sfc_odl, bgpvpn, moon) need also
+ODL configuration addons and as a consequence specific scenario.
+There are not considered as runnable on the generic odl_l2 scenario.
+
+=======
+How TOs
+=======
+
+How Functest works?
+===================
+
+The installation and configuration of the Functest docker image is
+described in `[1]`_.
+
+The procedure to start tests is described in `[2]`_
+
+
+How can I contribute to Functest?
+=================================
+
+If you are already a contributor of any OPNFV project, you can
+contribute to functest. If you are totally new to OPNFV, you must first
+create your Linux Foundation account, then contact us in order to
+declare you in the repository database.
+
+We distinguish 2 levels of contributors: the standard contributor can
+push patch and vote +1/0/-1 on any Functest patch. The commitor can vote
+-2/-1/0/+1/+2 and merge.
+Functest commitors are promoted by the Functest contributors.
+
+
+Where can I find some help to start?
+====================================
+
+This guide is made for you. You can also have a look at the project wiki
+page `[10]`_.
+There are references on documentation, video tutorials, tips...
+
+You can also directly contact us by mail with [Functest] prefix at
+opnfv-tech-discuss@lists.opnfv.org or on the IRC chan #opnfv-functest.
+
+
+What kind of testing do you do in Functest?
+===========================================
+
+Functest is focusing on Functional testing. The results must be PASS or
+FAILED. We do not deal with performance and/or qualification tests.
+We consider OPNFV as a black box and execute our tests from the jumphost
+according to Pharos reference technical architecture.
+
+Upstream test suites are integrated (Rally/Tempest/ODL/ONOS,...).
+If needed Functest may bootstrap temporarily testing activities if they
+are identified but not covered yet by an existing testing project (e.g
+security_scan before the creation of the security reporistory)
+
+
+How test constraints are defined?
+=================================
+
+Test constraints are defined according to 2 paramaters:
+
+ * the scenario (DEPLOY_SCENARIO env variable)
+ * the installer (INSTALLER_TYPE env variable)
+
+A scenario is a formal description of the system under test.
+The rules to define a scenario are described in `[4]`_
+
+These 2 constraints are considered to determinate if the test is runnable
+or not (e.g. no need to run onos suite on odl scenario).
+
+In the test declaration for CI, the test owner shall indicate these 2
+constraints. The file testcases.yaml `[5]`_ must be patched in git to
+include new test cases. A more elaborated system based on template is
+planned for next releases
+
+For each dependency, it is possible to define a regex::
+
+ name: promise
+ criteria: 'success_rate == 100%'
+ description: >-
+ Test suite from Promise project.
+ dependencies:
+ installer: '(fuel)|(joid)'
+ scenario: ''
+
+In the example above, it means that promise test will be runnable only
+with joid or fuel installers on any scenario.
+
+The vims criteria means any installer and exclude onos and odl with
+bgpvpn scenarios::
+
+ name: vims
+ criteria: 'status == "PASS"'
+ description: >-
+ This test case deploys an OpenSource vIMS solution from Clearwater
+ using the Cloudify orchestrator. It also runs some signaling traffic.
+ dependencies:
+ installer: ''
+ scenario: '(ocl)|(nosdn)|^(os-odl)((?!bgpvpn).)*$'
+
+
+
+
+How to write and check constaint regex?
+=======================================
+
+Regex are standard regex. You can have a look at `[11]`_
+
+You caa also easily test your regex via an online regex checker such as
+ `[12]`_.
+Put your scenario in the TEST STRING window (e.g. os-odl_l3-ovs-ha), put
+your regex in the REGULAR EXPRESSION window, then you can test your rule
+.
+
+
+How to know which test I can run?
+=================================
+
+You can use the API `[13]`_. The static declaration is in git `[5]`_
+
+If you are in a Functest docker container (assuming that the
+environement has been prepared): just use the new CLI.
+
+You can get the list per Test cases or by Tier::
+
+ # functest testcase list
+ healthcheck
+ vping_ssh
+ vping_userdata
+ tempest_smoke_serial
+ rally_sanity
+ odl
+ doctor
+ security_scan
+ tempest_full_parallel
+ rally_full
+ vims
+ # functest tier list
+ - 0. healthcheck:
+ ['healthcheck']
+ - 1. smoke:
+ ['vping_ssh', 'vping_userdata', 'tempest_smoke_serial', 'rally_sanity']
+ - 2. sdn_suites:
+ ['odl']
+ - 3. features:
+ ['doctor', 'security_scan']
+ - 4. openstack:
+ ['tempest_full_parallel', 'rally_full']
+ - 5. vnf:
+ ['vims']
+
+
+How to manually start Functest test?
+====================================
+
+Assuming that you are connected on the jumhost and that the system is
+"Pharos compliant", i.e the technical architecture is compatible with
+the one defined in the Pharos project::
+
+ # docker pull opnfv/functest:latest
+ # envs="-e INSTALLER_TYPE=fuel -e INSTALLER_IP=10.20.0.2 -e DEPLOY_SCENARIO=os-odl_l2-nofeature-ha -e CI_DEBUG=true"
+ # sudo docker run --privileged=true -id ${envs} opnfv/functest:latest /bin/bash
+
+
+Then you must connect to the docker container and source the
+credentials::
+
+ # docker ps (copy the id)
+ # docker exec -ti <container_id> bash
+ # source $creds
+
+
+You must first check if the environment is ready::
+
+ # functest env status
+ Functest environment ready to run tests.
+
+
+If not ready, prepare the env by launching::
+
+ # functest env prepare
+ Functest environment ready to run tests.
+
+Once the Functest env is ready, you can use the CLI to start tests.
+
+You can run test cases per test case or per tier:
+ # functest testcase run <case name> or # functest tier run <tier name>
+
+
+e.g::
+
+ # functest testcase run tempest_smoke_serial
+ # functest tier run features
+
+
+If you want to run all the tests you can type::
+
+ # functest testcase run all
+
+
+If you want to run all the tiers (same at the end that running all the
+test cases) you can type::
+
+ # functest tier run all
+
+
+How to declare my tests in Functest?
+====================================
+
+If you want to add new internal test cases, you can submit patch under
+the testcases directory of Functest reporsitory.
+
+For feature test integration, the code can be kept into your own
+repository. Then the files of the Functest repository you must modify to
+integrate Functest are:
+
+ * functest/docker/Dockerfile: get your code in Functest container
+ * functest/ci/testcases.yaml: reference your test and its associated constraints
+ * functest/ci/exec_test.sh: run your test from CI and CLI
+
+
+Dockerfile
+----------
+
+This file lists the repositories to be cloned in the Functest container.
+The repositories can be internal or external::
+
+ RUN git clone https://gerrit.opnfv.org/gerrit/<your project> ${repos_dir}/<your project>
+
+testcases.yaml
+--------------
+
+All the test cases that must be run from CI / CLI must be declared in
+co/testcases.yaml.
+This file is used to get the constraintes related to the test::
+
+ name: <my_super_test_case>
+ criteria: <not used yet in Colorado, could be > 'PASS', 'rate > 90%'
+ description: >-
+ <the description of your super test suite>
+ dependencies:
+ installer: regex related to installer e.g. 'fuel', '(apex)||(joid)'
+ scenario: regex related to the scenario e.g. 'ovs*no-ha'
+
+
+You must declare your test case in one of the category (tier).
+
+If you are integrating test suites from a feature project, the category
+must be features.
+
+
+exec_test.sh
+------------
+
+This file is used to start your test. It is used in CI but also by the
+CLI.
+
+You just patch the file in git and add a line::
+
+
+ "<my_super_test_case>")
+ python ${FUNCTEST_REPO_DIR}/testcases/features/mycase.py
+ ;;
+
+
+Note you can use python or bash scripts.
+
+
+How to select my list of tests for CI?
+======================================
+
+Functest can be run automatically from CI, a jenkins job is usually
+called after an OPNFV fresh installation.
+By default we try to run all the possible tests (see `[14]` called from
+Functest jenkins job)::
+
+ cmd="python ${FUNCTEST_REPO_DIR}/ci/run_tests.py -t all ${flags}"
+
+
+Each case can be configured as daily and/or weekly task.
+When executing run_tests.py a check based on the jenkins build tag will
+be considered to detect whether it is a daily and/or a weekly test.
+
+in your CI you can customize the list of test you want to run by case or
+by tier, just change the line::
+
+ cmd="python ${FUNCTEST_REPO_DIR}/ci/run_tests.py -t <whatever you want> ${flags}"
+
+e.g.::
+
+ cmd="python ${FUNCTEST_REPO_DIR}/ci/run_tests.py -t healthcheck,smoke ${flags}"
+
+This command will run all the test cases of the first 2 tiers, i.e.
+healthcheck, vping_ssh, vping_userdata, tempest_smoke_serial and
+rally_sanity.
+
+
How to push your results into the Test Database
===============================================
-The test database is used to collect test results. By default it is enabled only
-in Continuous Integration.
-The architecture and associated API is described in `[2]`_.
-If you want to push your results from CI, you just have to use the API at the
-end of your script.
+The test database is used to collect test results. By default it is
+enabled only for CI tests from Production CI pods.
+
+The architecture and associated API is described in previous chapter.
+If you want to push your results from CI, you just have to use the API
+at the end of your script.
You can also reuse a python function defined in functest_utils.py::
- def push_results_to_db(db_url, case_name, logger, pod_name,version, payload):
- """
- POST results to the Result target DB
- """
- url = db_url + "/results"
- installer = get_installer_type(logger)
- params = {"project_name": "functest", "case_name": case_name,
- "pod_name": pod_name, "installer": installer,
- "version": version, "details": payload}
-
- headers = {'Content-Type': 'application/json'}
- try:
- r = requests.post(url, data=json.dumps(params), headers=headers)
- if logger:
- logger.debug(r)
- return True
- except Exception, e:
- print "Error [push_results_to_db('%s', '%s', '%s', '%s', '%s')]:" \
- % (db_url, case_name, pod_name, version, payload), e
- return False
+ def push_results_to_db(db_url, case_name, logger, pod_name,version, payload):
+ """
+ POST results to the Result target DB
+ """
+ url = db_url + "/results"
+ installer = get_installer_type(logger)
+ params = {"project_name": "functest", "case_name": case_name,
+ "pod_name": pod_name, "installer": installer,
+ "version": version, "details": payload}
+
+ headers = {'Content-Type': 'application/json'}
+ try:
+ r = requests.post(url, data=json.dumps(params), headers=headers)
+ if logger:
+ logger.debug(r)
+ return True
+ except Exception, e:
+ print "Error [push_results_to_db('%s', '%s', '%s', '%s', '%s')]:" \
+ % (db_url, case_name, pod_name, version, payload), e
+ return False
==========
.. _`[1]`: http://artifacts.opnfv.org/functest/docs/configguide/index.html Functest configuration guide URL
.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html functest user guide URL
.. _`[3]`: https://wiki.opnfv.org/opnfv_test_dashboard
-
-
+.. _`[4]`: https://wiki.opnfv.org/display/INF/CI+Scenario+Naming
+.. _`[5]`: https://git.opnfv.org/cgit/functest/tree/ci/testcases.yaml
+.. _`[6]`: https://git.opnfv.org/cgit/releng/tree/utils/test/result_collection_api
+.. _`[7]`: https://git.opnfv.org/cgit/releng/tree/utils/test/scripts
+.. _`[8]`: https://git.opnfv.org/cgit/releng/tree/utils/test/reporting/functest
+.. _`[9]`: http://testresults.opnfv.org/reporting/
+.. _`[10]`: https://wiki.opnfv.org/opnfv_functional_testing
+.. _`[11]`: https://docs.python.org/2/howto/regex.html
+.. _`[12]`: https://regex101.com/
+.. _`[13]`: http://testresults.opnfv.org/test/api/v1/projects/functest/cases
+.. _`[14]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-daily.sh
OPNFV main site: opnfvmain_.
OPNFV functional test page: opnfvfunctest_.
.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html
.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py
.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml
-