--- /dev/null
+---
+# This configuration file defines Network Environment for a
+# Baremetal Deployment of OPNFV. It contains default values
+# for 5 following networks:
+#
+# - admin
+# - tenant*
+# - external*
+# - storage*
+# - api*
+# *) optional networks
+#
+# Optional networks will be consolidated with the admin network
+# if not explicitly configured.
+#
+# See short description of the networks in the comments below.
+#
+# "admin" is the short name for Control Plane Network.
+# This network should be IPv4 even it is an IPv6 deployment
+# IPv6 does not have PXE boot support.
+# During OPNFV deployment it is used for node provisioning which will require
+# PXE booting as well as running a DHCP server on this network. Be sure to
+# disable any other DHCP/TFTP server on this network.
+#
+# "tenant" is the network used for tenant traffic.
+#
+# "external" is the network which should have internet or external
+# connectivity. External OpenStack networks will be configured to egress this
+# network. There can be multiple external networks, but only one assigned as
+# "public" which OpenStack public API's will register.
+#
+# "storage" is the network for storage I/O.
+#
+# "api" is an optional network for splitting out OpenStack service API
+# communication. This should be used for IPv6 deployments.
+
+
+# Meta data for the network configuration
+network-config-metadata:
+ title: LF-POD-1 Network config
+ version: 0.1
+ created: Mon Dec 28 2015
+ comment: None
+
+# DNS Settings
+dns-domain: opnfvlf.org
+dns-search: opnfvlf.org
+dns_nameservers:
+ - 8.8.8.8
+ - 8.8.4.4
+# NTP servers
+ntp:
+ - 0.se.pool.ntp.org
+ - 1.se.pool.ntp.org
+# Syslog server
+syslog:
+ server: 10.128.1.24
+ transport: 'tcp'
+
+# http(s) proxy settings added to /etc/environment of uc and oc nodes
+# http_proxy: http://proxy.server:8080
+# https_proxy: https://proxy.server:8081
+
+# Common network settings
+networks:
+ # Admin configuration (pxe and jumpstart)
+ admin:
+ enabled: true
+ # Network settings for the Installer VM on admin network
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
+ # Interfaces to bridge for installer VM (use multiple values for bond)
+ members:
+ - em1
+ # VLAN tag to use for this network on Installer VM, native means none
+ vlan: native
+ # IP to assign to Installer VM on this network
+ ip: 192.0.2.1
+ # Usable ip range for the overcloud node IPs (including VIPs)
+ # Last IP is used for host bridge (i.e. br-admin).
+ # If empty entire range is usable.
+ # Cannot overlap with dhcp_range or introspection_range.
+ overcloud_ip_range:
+ - 192.0.2.51
+ - 192.0.2.99
+ # Gateway (only needed when public_network is disabled)
+ gateway: 192.0.2.1
+ # Subnet in CIDR format 192.168.1.0/24
+ cidr: 192.0.2.0/24
+ # DHCP range for the admin network, automatically provisioned if empty
+ dhcp_range:
+ - 192.0.2.2
+ - 192.0.2.50
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # Physical NIC members (Single value allowed for phys_type: interface)
+ members:
+ - eth0
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ members:
+ - eth0
+
+ # Tenant network configuration
+ tenant:
+ enabled: false
+ # Subnet in CIDR format 192.168.1.0/24
+ cidr: 11.0.0.0/24
+ # Tenant network MTU
+ mtu: 1500
+ # Tenant network Overlay segmentation ID range:
+ # VNI, VLAN-ID, etc.
+ overlay_id_range: 2,65535
+
+ # Tenant network segmentation type:
+ # vlan, vxlan, gre
+ segmentation_type: vxlan
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface/bond)
+ phys_type: interface
+ # UIO driver to use for DPDK scenarios.
+ # The value is ignored for non-DPDK scenarios.
+ uio_driver: uio_pci_generic
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ members:
+ # Note logical name like nic1 not valid for fdio deployment yet.
+ - eth1
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ # Physical interface type (interface/bond)
+ phys_type: interface
+ vlan: native
+ # Note: logicial names like nic1 are not valid for fdio deployment yet.
+ members:
+ - eth1
+
+ # Can contain 1 or more external networks
+ external:
+ - public:
+ enabled: false
+ # Public network MTU
+ mtu: 1500
+ # Network settings for the Installer VM on external network
+ # (note only valid on 'public' external network)
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
+ vlan: native
+ # Interfaces to bridge for installer VM (use multiple values for bond)
+ members:
+ - em1
+ # IP to assign to Installer VM on this network
+ ip: 192.168.37.1
+ cidr: 192.168.37.0/24
+ gateway: 192.168.37.1
+ # Range to allocate to floating IPs for the public network with Neutron
+ floating_ip_range:
+ - 192.168.37.200
+ - 192.168.37.220
+ # Usable ip range for the overcloud node IPs (including VIPs)
+ # Last IP will be used for host bridge (i.e. br-public).
+ # If empty entire range is usable.
+ # Cannot overlap with dhcp_range or introspection_range.
+ overcloud_ip_range:
+ - 192.168.37.10
+ - 192.168.37.199
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ members:
+ - eth2
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: native
+ members:
+ - eth2
+ # External network to be created in OpenStack by Services tenant
+ external_overlay:
+ name: Public_internet
+ type: flat
+ gateway: 192.168.37.1
+ # another external network
+ # This is an example and not yet supported
+ - private_cloud:
+ enabled: false
+ mtu: 1500
+ # Network settings for the Installer VM on external network
+ # note only valid on 'public' external network
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
+ vlan: 101
+ # Interfaces to bridge for installer VM (use multiple values for bond)
+ members:
+ - em1
+ # IP to assign to Installer VM on this network
+ ip: 192.168.38.1
+ cidr: 192.168.38.0/24
+ gateway: 192.168.38.1
+ # Range to allocate to floating IPs for the public network with Neutron
+ floating_ip_range:
+ - 192.168.38.200
+ - 192.168.38.220
+ # Usable IP range for overcloud nodes (including VIPs)i
+ # usually this is a shared subnet.
+ # Cannot overlap with dhcp_range or introspection_range.
+ overcloud_ip_range:
+ - 192.168.38.10
+ - 192.168.38.199
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: 101
+ # Physical NIC members of this mappingi
+ # Single value allowed for phys_type: interface
+ # Note: logical names like nic1 are not valid for fdio deployment yet.
+ members:
+ - eth3
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: 101
+ members:
+ - eth3
+ # External network to be created in OpenStack by Services tenant
+ external_overlay:
+ name: private_cloud
+ type: vlan
+ segmentation_id: 101
+ gateway: 192.168.38.1
+
+ # Storage network configuration
+ storage:
+ enabled: false
+ # Subnet in CIDR format
+ cidr: 12.0.0.0/24
+ # Storage network MTU
+ mtu: 1500
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ members:
+ # Note logical names like nic1 not valid for fdio deployment yet.
+ - eth3
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: native
+ members:
+ - eth3
+
+ api:
+ # API network configuration
+ enabled: false
+ # Subnet in CIDR format
+ cidr: fd00:fd00:fd00:4000::/64
+ # VLAN tag to use for Overcloud hosts on this network
+ vlan: 13
+ # Api network MTU
+ mtu: 1500
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ # Note logical names like nic1 not valid for fdio deployment yet.
+ members:
+ - eth4
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: native
+ members:
+ - eth4
+
+# Apex specific settings
+apex:
+ networks:
+ admin:
+ # Range used for introspection phase (examining nodes).
+ # This cannot overlap with dhcp_range or overcloud_ip_range.
+ # for the overcloud default external network
+ introspection_range:
+ - 192.0.2.100
+ - 192.0.2.120
Code Review / apex.git / blobdiff