Allows specifying nic order for overcloud nodes in network settings

[apex.git] / config / network / network_settings.yaml

diff --git a/config/network/network_settings.yaml b/config/network/network_settings.yaml
index 793c10d..7c0f501 100644 (file)
--- a/config/network/network_settings.yaml
+++ b/config/network/network_settings.yaml
@@ -34,6 +34,8 @@ admin_network:
   network_type: bridged
   bridged_interface: ''
   bond_interfaces: ''
+  compute_interface: nic1
+  controller_interface: nic1
   usable_ip_range: 192.0.2.11,192.0.2.99
   gateway: 192.0.2.1
   provisioner_ip: 192.0.2.1
@@ -50,6 +52,8 @@ private_network:
   enabled: true
   vlan: native
   cidr: 11.0.0.0/24
+  compute_interface: nic2
+  controller_interface: nic2
 
 # "public" network is used for external connectivity.
 # The external network provides Internet access for virtual
@@ -62,6 +66,8 @@ public_network:
   enabled: true
   network_type: ''
   bridged_interface: ''
+  compute_interface: nic3
+  controller_interface: nic3
   vlan: native
   cidr: 192.168.37.0/24
   gateway: 192.168.37.1
@@ -77,12 +83,16 @@ storage_network:
   enabled: true
   vlan: native
   cidr: 12.0.0.0/24
+  compute_interface: nic4
+  controller_interface: nic4
 
 #admin_network:
 #  enabled: true
 #  network_type: bridged                             #Indicates if this network will be bridged to an interface, or to a bond
 #  bridged_interface: ''                             #Interface to bridge to for installer VM
 #  bond_interfaces: ''                               #Interfaces to create bond with for installer VM
+#  compute_interface: nic4                           #Interface used for this network on the compute node.  Can either be logical nic name like "nic1" or real name like "eth1"
+#  controller_interface: nic4                        #Interface used for this network on the controller node.  Can either be logical nic name like "nic1" or real name like "eth1"
 #  vlan: native                                      #VLAN tag to use, native means none
 #  usable_ip_range: 192.0.2.11,192.0.2.99            #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20
 #  gateway: 192.0.2.1                                #Gateway (only needed when public_network is disabled), if empty it is auto-detected