+---
+# The only global parameter at this time is ha_enabled, which will use
+# the tripleo ha architecture described here:
+# https://github.com/beekhof/osp-ha-deploy/blob/master/HA-keepalived.md
+# with 3 controllers by default
+#
+# If ha_enabled is false, there will only be one controller.
global_params:
ha_enabled: true
- network_isolation_settings: network/network-environment-example.yaml
+ # introspect defaults to True,
+ # Enables/disables the introspection process at deploy time.
+ introspect: true
+ # ipxe defaults to True
+ # Enables/disables the use of ipxe for provisioning
+ ipxe: true
deploy_options:
- # instack_ip
- # IP address given to instack on the provisioning network
- instack_ip: 192.0.2.1
- # CIDR of provisioning network
- provisioning_cidr: 192.0.2.0/24
- # gateway IP of provisioning network
- provisioning_gateway: 192.0.2.1
- # IP pool start used for provisioning overcloud nodes
- provisioning_dhcp_start: 192.0.2.5
- # IP pool end used for inspecting overcloud nodes
- provisioning_dhcp_end: 192.0.2.24
- # IP pool used for inspecting overcloud nodes on the provisioning network
- provisioning_inspection_iprange: 192.0.2.100,192.0.2.124
+ # Which SDN controller to use. Valid options are 'opendaylight', 'onos',
+ # 'opendaylight-external', 'opencontrail' or false. A value of false will
+ # use Neutron's OVS ML2 controller.
sdn_controller: opendaylight
- tacker: false
+
+ # Which version of ODL to use. This is only valid if 'opendaylight' was used
+ # above. Valid options are 'nitrogen', 'oxygen'. If no value
+ # is specified, nitrogen will be used.
+ # odl_version: nitrogen
+
+ # Whether to install and configure Tacker (VNF Manager)
+ tacker: true
+
+ # Whether to configure Congress (policy as a service) datasources
+ # Note: Congress is already installed by default
congress: false
- # CIDR used to for the external network
- ext_net_cidr: 192.168.37.0/24
- # Allocation pools for floating ip addresses on the ext net
- ext_allocation_pool_start: 192.168.37.50
- ext_allocation_pool_end: 192.168.37.99
- # Default Gateway for External Network
- ext_gateway: 192.168.37.1
+
+ # Whether to configure ODL or ONOS with Service Function Chaining support.
+ # This requires the opnfv-apex-opendaylight-sfc package to be installed,
+ # since it uses a different overcloud image.
+ sfc: false
+
+ # Whether to configure ODL with SDNVPN support.
+ vpn: false
+
+ # Which dataplane to use for overcloud tenant networks. Valid options are
+ # 'ovs', 'ovs_dpdk' and 'fdio'.
+ dataplane: ovs
+
+ # Whether to run the kvm real time kernel (rt_kvm) in the compute node(s) to
+ # reduce the network latencies caused by network function virtualization
+ rt_kvm: false
+
+ # Whether to install and configure fdio functionality in the overcloud
+ # The dataplane should be specified as fdio if this is set to true
+ vpp: false
+
+ # Whether to run vsperf after the install has completed
+ # vsperf: false
+
+ # Specify a device for ceph to use for the OSDs. By default a virtual disk
+ # is created for the OSDs. This setting allows you to specify a different
+ # target for the OSDs. The setting must be valid on all overcloud nodes.
+ # The controllers and the compute nodes all have OSDs setup on them and
+ # therefore this device name must be valid on all overcloud nodes.
+ # ceph_device: /dev/sdb
+
+ # Set performance options on specific roles. The valid roles are 'Compute',
+ # 'Controller' and 'Storage', and the valid sections are 'kernel' and 'nova'
+ # performance:
+ # Controller:
+ # kernel:
+ # # In this example, these three settings will be passed to the kernel
+ # # boot line. Any key/value pair can be entered here, so care should
+ # # be taken to ensure that machines do not fail to boot.
+ # #
+ # # isolcpus is generally used to push host processes off a particular
+ # # core, so that it can be dedicated to a specific process. On control
+ # # nodes this could be an ovs_dpdk process.
+ # isolcpus: 1
+ # # Hugepages are required for ovs_dpdk support.
+ # hugepage: 2M
+ # # intel_iommu is also required for ovs_dpdk support.
+ # intel_iommu: 'on'
+ # Compute:
+ # nova:
+ # # This is currently the only available option in the nova section. It
+ # # will add the provided string to vcpu_pin_set in nova.conf. This is
+ # # used to pin guest VMs to a set of CPU cores, and is decsribed in
+ # # more detail here:
+ # # http://docs.openstack.org
+ # # /ocata/config-reference/compute/config-options.html
+ # libvirtpin: 1
+ # kernel:
+ # # On compute nodes, isolcpus is usually used to reserve cores for use
+ # # either by VMs or ovs_dpdk
+ # isolcpus: 0
+ # hugepage: 2M
+ # intel_iommu: 'on'
+
+ # Set yardstick option to install yardstick
+ # yardstick: false
+
+ # Set dovetail option to install dovetail
+ # dovetail: false
Code Review / apex.git / blobdiff